DtLightSignalSequenceGenerator generates a sequence of on/off times like the S57 SIGSEQ attribute based on the LITCHR, SIGPER, and SIGGRP atributes. More...

Inheritance diagram for makVrv::DtLightSignalSequenceGenerator:

[legend]

Public Types
enum	NavigationLightCharacteristic { LightCharacteristicFixed = 1, LightCharacteristicFlashing = 2, LightCharacteristicLongFlashing = 3, LightCharacteristicQuickFlashing = 4, LightCharacteristicVeryQuickFlashing = 5, LightCharacteristicUltraQuickFlashing = 6, LightCharacteristicIsophased = 7, LightCharacteristicOcculting = 8, LightCharacteristicInterruptedQuickFlashing = 9, LightCharacteristicInterruptedVeryQuickFlashing = 10, LightCharacteristicInterruptedUltraQuickFlashing = 11, LightCharacteristicMorse = 12, LightCharacteristicFixedFlash = 13, LightCharacteristicFlashLongFlash = 14, LightCharacteristicOccultingFlash = 15, LightCharacteristicFixedLongFlash = 16, LightCharacteristicOccultingAlternating = 17, LightCharacteristicLongFlashAlternating = 18, LightCharacteristicFlashAlternating = 19, LightCharacteristicGroupAlternating = 20, LightCharacteristicQuickFlashLongFlash = 25, LightCharacteristicVeryQuickFlashLongFlash = 26, LightCharacteristicUntraQuickFlashLongFlash = 27, LightCharacteristicAlternating = 28, LightCharacteristicFixedAlternatingFlashing = 29 }

Public Member Functions
virtual	~DtLightSignalSequenceGenerator ()
	virtual DTOR More...

DtNavigationLightController::SignalSequence	generateSigseq (int lightCharacteristic, float period, const std::string &signalGroup) const
	Geerate a signal sequence based on the S-57 light characteristic, period, and signal group parameters. More...

void	generateMorseCodeSignalSequencesMap ()
	Called by the constructor to initialize a map of Morse Code sequences one for each letter and digit. More...


virtual void	setDefaultAlternatingPeriod (float defaultPeriod)
	Set defaults used for generating signal sequences. More...

virtual void	setMaximumLongFlashPeriod (float maximumPeriod)
	Set the maximum period for long flashing lights Defaults to 8s (this is not part of the standard, but lets us treat long flashes the way we handle other flash lengths. More...

virtual void	setMinimumLongFlashPeriod (float minimumPeriod)
	Set the minimum period for long flashing lights Defaults to 6s (to conform to the standard, and because we use 1/3 period for the light on-time, must be 6s or more) More...

virtual void	setMaximumFlashPeriod (float maximumPeriod)
	Set the maximum period for flashing lights Defaults to 4s (to conform to the standard, must be less than 6. More...

virtual void	setMinimumFlashPeriod (float minimumPeriod)
	Set the minimum period for flashing lights Defaults to 2s (to conform to the standard, must be 2. More...

virtual void	setMaximumQuickFlashPeriod (float maximumPeriod)
	Set the maximum period for quick flashing lights Defaults to 1s (to conform to the standard, must be 1s or less) More...

virtual void	setMinimumQuickFlashPeriod (float minimumPeriod)
	Set the minimum period for quick flashing lights Defaults to 0.8s (to conform to the standard, must be > than 0.6 to not be Very Quick) More...

virtual void	setMaximumVeryQuickFlashPeriod (float maximumPeriod)
	Set the maximum period for very quick flashing lights Defaults to 0.6s (to conform to the standard, must be 0.6s or less) More...

virtual void	setMinimumVeryQuickFlashPeriod (float minimumPeriod)
	Set the minimum period for very quick flashing lights Defaults to 0.5s (to conform to the standard, must be > than 0.375 by enough to not be Very Quick) More...

virtual void	setMaximumUltraQuickFlashPeriod (float maximumPeriod)
	Set the maximum period for ultra quick flashing lights Defaults to 0.375s (to conform to the standard, must be 0.375s or less) More...

virtual void	setMinimumUltraQuickFlashPeriod (float minimumPeriod)
	Set the maimimum period for ultra quick flashing lights Defaults to 0.2s (not part of the standard, but lets us treat ultra quick flashes the way we do the other kinds) More...

virtual void	setOnTimeFraction (float onTimeFraction)
	For lights that aren't isophased, this is the portion of the light's period that will be on. More...


virtual void	setDefaultMorseCodeDot (float defaultTime)
	Set default values used for generating Morse code signal sequences The international Morse code standards states: short mark (�) � "dot duration" is one time unit long longer mark (�) � three time units long inter-element gap between the dots and dashes within a character � one dot duration or one unit long short gap (between letters) � three time units long The defaults used do NOT conform strictly to these rules, but follow the example sequences found on all Morse-code signalling buoys in Boston and Honolulu harbors. More...

virtual void	setDefaultMorseCodeDash (float defaultTime)
	Set the default on-time for a Morse code 'dash' Initialized to 2.0s. More...

virtual void	setDefaultMorseCodeDotDashSpacing (float defaultTime)
	Set the default Morse code inter-element gap Initialized to 0.6s. More...

virtual void	setDefaultMorseCodeLetterSpacing (float defaultTime)
	Set the default Morse code inter-letter gap. More...

virtual void	setDefaultMorseCodeGroupSpacing (float defaultTime)
	Set the off time at the end of a Morse code group. More...

Public Member Functions inherited from makVrv::DtVirtualBaseClass
	DtVirtualBaseClass ()
	Do nothing constructor. More...

virtual	~DtVirtualBaseClass ()
	Virtual do nothing destructor. More...

Static Public Member Functions
static DtLightSignalSequenceGenerator &	instance (DtDe &de)
	Access a DtLightSignalSequenceGenerator. More...

static float	sumSignalSequence (DtNavigationLightController::SignalSequence sequence)
	Calculate the total time for the specified sequence or sequence fragment. More...

static void	printSignalSequence (const DtNavigationLightController::SignalSequence &seq)
	Prints the sequence to std::cout. No newline is printed. More...

Protected Types
enum	SignalGroupType { SignalGroupTypeNoGroup, SignalGroupTypeSimpleGroup, SignalGroupTypeCompositeGroup }
	A SIGGRP group may be empty (or a group of size 1, which is equivalent); a simple group which is just the number of flashes in the group; or a composite group, which is used with light characteristics the have different flash types (like 14-16 and 25-27) More...

typedef boost::unordered_map < char, DtNavigationLightController::SignalSequence >	MorseCodeMap

Protected Member Functions
	DtLightSignalSequenceGenerator ()
	CTOR. More...

	DtLightSignalSequenceGenerator (const DtLightSignalSequenceGenerator &rhs)
	Unimplemented Copy CTOR. More...

DtLightSignalSequenceGenerator &	operator= (const DtLightSignalSequenceGenerator &orig)
	Unimplemented Assignment Operator. More...

virtual DtNavigationLightController::SignalSequence	flashNoGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Group type-specific implementations. More...

virtual DtNavigationLightController::SignalSequence	flashSimpleGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a simple flash group signal sequence, A simple group is one that just indicates a group size, like (4). More...

virtual DtNavigationLightController::SignalSequence	flashCompositeGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a flash composite group signal sequence. More...

virtual DtNavigationLightController::SignalSequence	longFlashNoGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a long flash signal sequence Ontime = P/10. More...

virtual DtNavigationLightController::SignalSequence	longFlashSimpleGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a simple long flash group signal sequence, A simple group is one that just indicates a group size, like (4). More...

virtual DtNavigationLightController::SignalSequence	longFlashCompositeGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a long flash composite group signal sequence Returns baseCompositeGroup called with minimum and maximum periods for a long flash. More...

virtual DtNavigationLightController::SignalSequence	quickFlashNoGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a quick flash signal sequence Ontime = P/10. More...

virtual DtNavigationLightController::SignalSequence	quickFlashSimpleGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a simple quick flash group signal sequence, A simple group is one that just indicates a group size, like (4). More...

virtual DtNavigationLightController::SignalSequence	quickFlashCompositeGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a quick flash composite group signal sequence Returns baseCompositeGroup called with minimum and maximum periods for a quick flash. More...

virtual DtNavigationLightController::SignalSequence	veryQuickFlashNoGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a very quick flash signal sequence Ontime = offtime = P/2. More...

virtual DtNavigationLightController::SignalSequence	veryQuickFlashSimpleGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a simple very flash group signal sequence, A simple group is one that just indicates a group size, like (4). More...

virtual DtNavigationLightController::SignalSequence	veryQuickFlashCompositeGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a very quick flash composite group signal sequence Rreturns baseCompositeGroup called with minimum and maximum periods for a very quick flash. More...

virtual DtNavigationLightController::SignalSequence	ultraQuickFlashNoGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate an ultra quick flash signal sequence Ontime = offtime = P/2. More...

virtual DtNavigationLightController::SignalSequence	ultraQuickFlashSimpleGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate a simple ultra flash group signal sequence, A simple group is one that just indicates a group size, like (4). More...

virtual DtNavigationLightController::SignalSequence	ultraQuickFlashCompositeGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate an ultra quick flash composite group signal sequence Returns baseCompositeGroup called with minimum and maximum periods for an ultra quick flash. More...

virtual DtNavigationLightController::SignalSequence	occultingNoGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate an occulting signal sequence Offtime = P/10. More...

virtual DtNavigationLightController::SignalSequence	occultingSimpleGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate an occulting group signal sequence, A simple group is one that just indicates a group size, like (4). More...

virtual DtNavigationLightController::SignalSequence	occultingCompositeGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate an occulting composite group signal sequence. More...

virtual DtNavigationLightController::SignalSequence	alternatingNoGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate an alternating signal sequence Offtime = 0. More...

virtual DtNavigationLightController::SignalSequence	alternatingSimpleGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate an alternating group signal sequence, A simple group is one that just indicates a group size, like (4). More...

virtual DtNavigationLightController::SignalSequence	alternatingCompositeGroup (float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	Generate an alternating composite group signal sequence. More...

virtual DtNavigationLightController::SignalSequence	baseCompositeGroup (float minFlashPeriod, float maxFlashPeriod, float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const

virtual SignalGroupType	signalGroupType (const DtLightMarkerStringParser::SiggrpData &data) const
	Determine the signal group type based on the parsed signal group data. More...

virtual DtNavigationLightController::SignalSequence	morseCodeSequence (char character) const
	Get the morse code sequence for the indicated character. More...


virtual DtNavigationLightController::SignalSequence	fixedSignalSequence (float period, const std::string &signalGroup) const
	Light Characteristic Implementations. More...

virtual DtNavigationLightController::SignalSequence	flashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 2. More...

virtual DtNavigationLightController::SignalSequence	longFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 3. More...

virtual DtNavigationLightController::SignalSequence	quickFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 4. More...

virtual DtNavigationLightController::SignalSequence	veryQuickFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 5. More...

virtual DtNavigationLightController::SignalSequence	ultraQuickFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 6. More...

virtual DtNavigationLightController::SignalSequence	isophasedSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 7. More...

virtual DtNavigationLightController::SignalSequence	occultingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 8. More...

virtual DtNavigationLightController::SignalSequence	interruptedQuickFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 9. More...

virtual DtNavigationLightController::SignalSequence	interruptedVeryQuickFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 10. More...

virtual DtNavigationLightController::SignalSequence	interruptedUltraQuickFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 11. More...

virtual DtNavigationLightController::SignalSequence	morseSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 12. More...

virtual DtNavigationLightController::SignalSequence	fixedFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 13. More...

virtual DtNavigationLightController::SignalSequence	flashingLongFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 14. More...

virtual DtNavigationLightController::SignalSequence	occultingFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 15. More...

virtual DtNavigationLightController::SignalSequence	fixedLongFlashingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 16. More...

virtual DtNavigationLightController::SignalSequence	occultingAlternatingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 17. More...

virtual DtNavigationLightController::SignalSequence	longFlashAlternatingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 18. More...

virtual DtNavigationLightController::SignalSequence	flashAlternatingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 19. More...

virtual DtNavigationLightController::SignalSequence	groupAlternatingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 20. More...

virtual DtNavigationLightController::SignalSequence	quickFlashLongFlashSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 25. More...

virtual DtNavigationLightController::SignalSequence	veryQuickFlashLongFlashSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 26. More...

virtual DtNavigationLightController::SignalSequence	ultraQuickFlashLongFlashSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 27. More...

virtual DtNavigationLightController::SignalSequence	baseFlashLongFlashSignalSequence (float minFlashPeriod, float maxFlashPeriod, float period, const DtLightMarkerStringParser::SignalGroup &signalGroup) const
	The actual implementation of LITCHR 25, 26, and 27 is done here. More...

virtual DtNavigationLightController::SignalSequence	alternatingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 28. More...

virtual DtNavigationLightController::SignalSequence	fixedAlternatingSignalSequence (float period, const std::string &signalGroup) const
	LITCHR == 29. More...

Protected Attributes
float	myMaximumLongFlashPeriod

float	myMinimumLongFlashPeriod

float	myMaximumFlashPeriod

float	myMinimumFlashPeriod

float	myMaximumQuickFlashPeriod

float	myMinimumQuickFlashPeriod

float	myMaximumVeryQuickFlashPeriod

float	myMinimumVeryQuickFlashPeriod

float	myMinimumUltraQuickFlashPeriod

float	myMaximumUltraQuickFlashPeriod

float	myDefaultMorseCodeDot

float	myDefaultMorseCodeDash

float	myDefaultMorseCodeDotDashSpacing

float	myDefaultMorseCodeLetterSpacing

float	myDefaultMorseCodeGroupSpacing

float	myDefaultAlternatingPeriod

float	myOnTimeFraction

MorseCodeMap	myMorseCodeMap

Friends
class	DtLightSignalSequenceGeneratorCreator
	The class may only be instantiated through the friend creator. More...

Detailed Description

DtLightSignalSequenceGenerator generates a sequence of on/off times like the S57 SIGSEQ attribute based on the LITCHR, SIGPER, and SIGGRP atributes.

While the S57 SIGSEQ attribute provides the most accuracy as to how a navigation light operates, it is an optional parameter and not always included. An instance of this class can be used to approximate the light sequence to the point where the light's sequence properties should be recognizable.

Member Typedef Documentation

typedef boost::unordered_map<char, DtNavigationLightController::SignalSequence> makVrv::DtLightSignalSequenceGenerator::MorseCodeMap

protected

Member Enumeration Documentation

enum makVrv::DtLightSignalSequenceGenerator::NavigationLightCharacteristic

Enumerator
LightCharacteristicFixed
LightCharacteristicFlashing
LightCharacteristicLongFlashing
LightCharacteristicQuickFlashing
LightCharacteristicVeryQuickFlashing
LightCharacteristicUltraQuickFlashing
LightCharacteristicIsophased
LightCharacteristicOcculting
LightCharacteristicInterruptedQuickFlashing
LightCharacteristicInterruptedVeryQuickFlashing
LightCharacteristicInterruptedUltraQuickFlashing
LightCharacteristicMorse
LightCharacteristicFixedFlash
LightCharacteristicFlashLongFlash
LightCharacteristicOccultingFlash
LightCharacteristicFixedLongFlash
LightCharacteristicOccultingAlternating
LightCharacteristicLongFlashAlternating
LightCharacteristicFlashAlternating
LightCharacteristicGroupAlternating
LightCharacteristicQuickFlashLongFlash	21-24 No longer used.
LightCharacteristicVeryQuickFlashLongFlash
LightCharacteristicUntraQuickFlashLongFlash
LightCharacteristicAlternating
LightCharacteristicFixedAlternatingFlashing

enum makVrv::DtLightSignalSequenceGenerator::SignalGroupType

protected

A SIGGRP group may be empty (or a group of size 1, which is equivalent); a simple group which is just the number of flashes in the group; or a composite group, which is used with light characteristics the have different flash types (like 14-16 and 25-27)

Enumerator
SignalGroupTypeNoGroup
SignalGroupTypeSimpleGroup
SignalGroupTypeCompositeGroup

Constructor & Destructor Documentation

virtual makVrv::DtLightSignalSequenceGenerator::~DtLightSignalSequenceGenerator ( )

virtual

virtual DTOR

makVrv::DtLightSignalSequenceGenerator::DtLightSignalSequenceGenerator ( )

protected

CTOR.

Only callable by friend creator

makVrv::DtLightSignalSequenceGenerator::DtLightSignalSequenceGenerator ( const DtLightSignalSequenceGenerator & rhs )

protected

Unimplemented Copy CTOR.

Member Function Documentation

static DtLightSignalSequenceGenerator& makVrv::DtLightSignalSequenceGenerator::instance ( DtDe & de )

static

Access a DtLightSignalSequenceGenerator.

DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::generateSigseq	(	int	lightCharacteristic,
		float	period,
		const std::string &	signalGroup
	)		const

Geerate a signal sequence based on the S-57 light characteristic, period, and signal group parameters.

A signal sequence is a vector of floats which represent light on and off times, respectively

void makVrv::DtLightSignalSequenceGenerator::generateMorseCodeSignalSequencesMap ( )

Called by the constructor to initialize a map of Morse Code sequences one for each letter and digit.

This needs to be called again if any of the Morse code-related defaults are changed

virtual void makVrv::DtLightSignalSequenceGenerator::setDefaultAlternatingPeriod ( float defaultPeriod )

virtual

Set defaults used for generating signal sequences.

The min and max periods are technically not necessary, since this is a required attribute for all non-fixed lights. The are included for completeness in the case(s) where data may be incomplete. Set the default period for alternating lights Initialized to 4s

virtual void makVrv::DtLightSignalSequenceGenerator::setMaximumLongFlashPeriod ( float maximumPeriod )

virtual

Set the maximum period for long flashing lights Defaults to 8s (this is not part of the standard, but lets us treat long flashes the way we handle other flash lengths.

virtual void makVrv::DtLightSignalSequenceGenerator::setMinimumLongFlashPeriod ( float minimumPeriod )

virtual

Set the minimum period for long flashing lights Defaults to 6s (to conform to the standard, and because we use 1/3 period for the light on-time, must be 6s or more)

virtual void makVrv::DtLightSignalSequenceGenerator::setMaximumFlashPeriod ( float maximumPeriod )

virtual

Set the maximum period for flashing lights Defaults to 4s (to conform to the standard, must be less than 6.

by enough to be distinguishable from a long flash)

virtual void makVrv::DtLightSignalSequenceGenerator::setMinimumFlashPeriod ( float minimumPeriod )

virtual

Set the minimum period for flashing lights Defaults to 2s (to conform to the standard, must be 2.

or more)

virtual void makVrv::DtLightSignalSequenceGenerator::setMaximumQuickFlashPeriod ( float maximumPeriod )

virtual

Set the maximum period for quick flashing lights Defaults to 1s (to conform to the standard, must be 1s or less)

virtual void makVrv::DtLightSignalSequenceGenerator::setMinimumQuickFlashPeriod ( float minimumPeriod )

virtual

Set the minimum period for quick flashing lights Defaults to 0.8s (to conform to the standard, must be > than 0.6 to not be Very Quick)

virtual void makVrv::DtLightSignalSequenceGenerator::setMaximumVeryQuickFlashPeriod ( float maximumPeriod )

virtual

Set the maximum period for very quick flashing lights Defaults to 0.6s (to conform to the standard, must be 0.6s or less)

virtual void makVrv::DtLightSignalSequenceGenerator::setMinimumVeryQuickFlashPeriod ( float minimumPeriod )

virtual

Set the minimum period for very quick flashing lights Defaults to 0.5s (to conform to the standard, must be > than 0.375 by enough to not be Very Quick)

virtual void makVrv::DtLightSignalSequenceGenerator::setMaximumUltraQuickFlashPeriod ( float maximumPeriod )

virtual

Set the maximum period for ultra quick flashing lights Defaults to 0.375s (to conform to the standard, must be 0.375s or less)

virtual void makVrv::DtLightSignalSequenceGenerator::setMinimumUltraQuickFlashPeriod ( float minimumPeriod )

virtual

Set the maimimum period for ultra quick flashing lights Defaults to 0.2s (not part of the standard, but lets us treat ultra quick flashes the way we do the other kinds)

virtual void makVrv::DtLightSignalSequenceGenerator::setOnTimeFraction ( float onTimeFraction )

virtual

For lights that aren't isophased, this is the portion of the light's period that will be on.

Note that for occulting lights, this is actually the 'off' time fraction. Default is 1/3.

virtual void makVrv::DtLightSignalSequenceGenerator::setDefaultMorseCodeDot ( float defaultTime )

virtual

Set default values used for generating Morse code signal sequences The international Morse code standards states: short mark (�) � "dot duration" is one time unit long longer mark (�) � three time units long inter-element gap between the dots and dashes within a character � one dot duration or one unit long short gap (between letters) � three time units long The defaults used do NOT conform strictly to these rules, but follow the example sequences found on all Morse-code signalling buoys in Boston and Honolulu harbors.

If you change them, call generateMorseCodeSignalSequencesMap() to regenerate the character map. Set the default on-time for a Morse code 'dot' Initialized to 0.4s

virtual void makVrv::DtLightSignalSequenceGenerator::setDefaultMorseCodeDash ( float defaultTime )

virtual

Set the default on-time for a Morse code 'dash' Initialized to 2.0s.

virtual void makVrv::DtLightSignalSequenceGenerator::setDefaultMorseCodeDotDashSpacing ( float defaultTime )

virtual

Set the default Morse code inter-element gap Initialized to 0.6s.

virtual void makVrv::DtLightSignalSequenceGenerator::setDefaultMorseCodeLetterSpacing ( float defaultTime )

virtual

Set the default Morse code inter-letter gap.

Initialized to 2.0s

virtual void makVrv::DtLightSignalSequenceGenerator::setDefaultMorseCodeGroupSpacing ( float defaultTime )

virtual

Set the off time at the end of a Morse code group.

Initialized to 9.0s

DtLightSignalSequenceGenerator& makVrv::DtLightSignalSequenceGenerator::operator= ( const DtLightSignalSequenceGenerator & orig )

protected

Unimplemented Assignment Operator.

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::fixedSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

Light Characteristic Implementations.

For this documentation, on and off times are indicated between '[]'. The first is always an 'on'time, and then alternating 'off', 'on' etc. Abbreviations used: P = Period, G = group sizeLITCHR == 1. Fixed. Returns an empty sequence, which is interpreted as fixed by the light controller

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::flashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 2.

Flashing. Based on the Signal Group Type:

No Group: returns flashNoGroup()
Simple Group: returns flashSimpleGroup()
Composite Group: returns flashCompositeGroup()

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::longFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 3.

Long Flashing. Based on the Signal Group Type:

No Group: returns longFlashNoGroup()
Simple Group: returns longFlashSimpleGroup()
Composite Group: returns longFlashCompositeGroup()

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::quickFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 4.

Quick Flashing. Based on the Signal Group Type:

No Group: returns quickFlashNoGroup()
Simple Group: returns quickFlashSimpleGroup()
Composite Group: returns quickFlashCompositeGroup()

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::veryQuickFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 5.

Very Quick Flashing. Based on the Signal Group Type:

No Group: returns veryQuickFlashNoGroup()
Simple Group: returns veryQuickFlashSimpleGroup()
Composite Group: returns veryQuickFlashCompositeGroup()

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::ultraQuickFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 6.

Ultra Quick Flashing. Based on the Signal Group Type:

No Group: returns ultraQuickFlashNoGroup()
Simple Group: returns ultraQuickFlashSimpleGroup()
Composite Group: returns ultraQuickFlashCompositeGroup()

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::isophasedSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 7.

Isophased. Based on the Signal Group Type:

No Group: Ontime = offtime = P/2.. Returns [ontime][offtime]
Simple Group: Ontime = offtime = P/(G*4.) Returns [ontime][offtime] for each group except the last, then [ontime], then [P/2.+offtime]
Composite Group: returns empty sequence [] ; prints 'unimplemented' warning

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::occultingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 8.

Occulting. Based on the Signal Group Type:

No Group: returns occultingNoGroup()
Simple Group: returns occultingSimpleGroup()
Composite Group: returns occultingCompositeGroup()

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::interruptedQuickFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 9.

Interrupted Very Quick Flashing.

returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::interruptedVeryQuickFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 10.

Interrupted Very Quick Flashing.

returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::interruptedUltraQuickFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 11.

Interrupted Ultra Quick Flashing.

returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::morseSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 12.

Morse Code.

returns morse coded sequence(s) for the specified letter(s) and/or digit(s)returned by morseCodeSequence() followed by the remainder of time from the specified period. Example. Given a Period of 16.s and a SIGGRP of (AA) - morseCodeSequence('A') returns [myDefaultMorseCodeDot] [myDefaultMorseCodeDotDashSpacing] [myDefaultMorseCodeDash]. To add the second 'A', we need a letter spacing: [myDefaultMorseCodeLetterSpacing] and then repeat the 'A' sequence: [myDefaultMorseCodeDot] [myDefaultMorseCodeDotDashSpacing] [myDefaultMorseCodeDash]. The method then adds up all the time used by the sequence 'AA'. Using the default timings, that would be 0.4+0.6+2.0+2.0+0.4+0.6+2.0 = 8.0. So a final offtime of 16.-8.=8. seconds ends the sequence.

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::fixedFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 13.

Fixed Flashing.

returns flashSignalSequence() and prints a warning to console. The current light model implementation cannot support this type, as it requires changing intensity rather than just on/off states

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::flashingLongFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 14.

Flashing Long Flashing. Returns baseFlashLongFlashSignalSequence called with min and max periods for standard Flash

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::occultingFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 15.

Occulting Long Flashing.

returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::fixedLongFlashingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 16.

Fixed Long Flashing

returns flashSignalSequence() and prints a warning to console. The current light model implementation cannot support this type, as it requires changing intensity rather than just on/off states

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::occultingAlternatingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 17.

Occulting Alternating. Based on the Signal Group Type:

No Group: This function assumes that one sequence is an occulting flash for each alternating color. Offtime = P/20. (or the minimum); ontime = P/2. - offtime Returns [ontime] [offtime] [ontime] [offtime]
Simple Group: This function assumes that each 'group' is an occulting flash of each alternating color. Hence there are G * 2 occults. Offtime = P/(40.*G)(or the minimum flash); ontime = P/(4.*G) - offtime Returns [ontime][offtime][ontime][offtime] for each group except the last, then [ontime][offtime][ontime], then [P/2. + offtime]
Composite Group: returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::longFlashAlternatingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 18.

Long Flash Alternating. Based on the Signal Group Type:

No Group: This function assumes that one sequence is an long flash for each alternating color. Ontime = P/20. (or the minimum long flash); offtime = P/2. - ontime Returns [ontime] [offtime] [ontime] [offtime]
Simple Group: This function assumes that each 'group' is a long flash of each alternating color. Hence there are G * 2 flashes. Ontime = P/(40.*G)(or the minimum long flash); offtime = P/(4.*G) - ontime Returns [ontime][offtime][ontime][offtime] for each group except the last, then [ontime][offtime][ontime], then [P/2. + offtime]
Composite Group: returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::flashAlternatingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 19.

Flash Alternating. Based on the Signal Group Type:

No Group: This function assumes that one sequence is a flash for each alternating color. Ontime = P/20. (or the minimum flash); offtime = P/2. - ontime Returns [ontime] [offtime] [ontime] [offtime]
Simple Group: This function assumes that each 'group' is a flash of each alternating color. Hence there are G * 2 flashes. Ontime = P/(40.*G)(or the minimum flash); offtime = P/(4.*G) - ontime Returns [ontime][offtime][ontime][offtime] for each group except the last, then [ontime][offtime][ontime], then [P/2. + offtime]
Composite Group: returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::groupAlternatingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 20.

Group Alternating.

returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::quickFlashLongFlashSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 25.

Quick Flashing Long Flashing. Returns baseFlashLongFlashSignalSequence called with min and max periods for Quick Flash

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::veryQuickFlashLongFlashSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 26.

Very Quick Flashing Long Flashing. Returns baseFlashLongFlashSignalSequence called with min and max periods for Very Quick Flash

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::ultraQuickFlashLongFlashSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 27.

Ultra Quick Flashing Long Flashing. Returns baseFlashLongFlashSignalSequence called with min and max periods for Ultra Quick Flash

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::baseFlashLongFlashSignalSequence	(	float	minFlashPeriod,
		float	maxFlashPeriod,
		float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

The actual implementation of LITCHR 25, 26, and 27 is done here.

Each calls this method with the min and max periods for its starting flash type

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::alternatingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 28.

Alternating. Based on the Signal Group Type:

No Group: returns alternatingNoGroup()
Simple Group: returns alternatingSimpleGroup()
Composite Group: returns alternatingCompositeGroup()

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::fixedAlternatingSignalSequence	(	float	period,
		const std::string &	signalGroup
	)		const

protectedvirtual

LITCHR == 29.

Fixed Alternating.

returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::flashNoGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Group type-specific implementations.

It is expected that these might be reusable when implementing some of the compound light characteristics. Generate a flash signal sequence Ontime = P/10. (or the minimum flash time); offtime = P - ontime Returns [ontime][offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::flashSimpleGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a simple flash group signal sequence, A simple group is one that just indicates a group size, like (4).

Ontime = P/(20.*G) (or the minimum flash time); offtime = P/(2.*G) - ontime Returns [ontime][offtime] for all but the last group, then [ontime], then [P/2. + offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::flashCompositeGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a flash composite group signal sequence.

A composite group is a group with 2 or more subgroups, like (2 + 1) Returns baseCompositeGroup called with minimum and maximum periods for a standard flash

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::longFlashNoGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a long flash signal sequence Ontime = P/10.

(or the minimum long flash time); offtime = P - ontime Returns [ontime][offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::longFlashSimpleGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a simple long flash group signal sequence, A simple group is one that just indicates a group size, like (4).

Ontime = P/(20.*G) (or the minimum long flash time); offtime = P/(2.*G) - ontime Returns [ontime][offtime] for all but the last group, then [ontime], then [P/2. + offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::longFlashCompositeGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a long flash composite group signal sequence Returns baseCompositeGroup called with minimum and maximum periods for a long flash.

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::quickFlashNoGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a quick flash signal sequence Ontime = P/10.

(or the minimum flash time); offtime = P - ontime Returns [ontime][offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::quickFlashSimpleGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a simple quick flash group signal sequence, A simple group is one that just indicates a group size, like (4).

Ontime = P/(4.*G); offtime = P/(4.*G) Returns [ontime][offtime] for all but the last group, then [ontime], then [P/2. + offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::quickFlashCompositeGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a quick flash composite group signal sequence Returns baseCompositeGroup called with minimum and maximum periods for a quick flash.

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::veryQuickFlashNoGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a very quick flash signal sequence Ontime = offtime = P/2.

Returns [ontime][offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::veryQuickFlashSimpleGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a simple very flash group signal sequence, A simple group is one that just indicates a group size, like (4).

Ontime = P/(4.*G); offtime = P/(4.*G) Returns [ontime][offtime] for all but the last group, then [ontime], then [P/2. + offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::veryQuickFlashCompositeGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a very quick flash composite group signal sequence Rreturns baseCompositeGroup called with minimum and maximum periods for a very quick flash.

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::ultraQuickFlashNoGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate an ultra quick flash signal sequence Ontime = offtime = P/2.

Returns [ontime][offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::ultraQuickFlashSimpleGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate a simple ultra flash group signal sequence, A simple group is one that just indicates a group size, like (4).

Ontime = P/(4.*G); offtime = P/(4.*G) Returns [ontime][offtime] for all but the last group, then [ontime], then [P/2. + offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::ultraQuickFlashCompositeGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate an ultra quick flash composite group signal sequence Returns baseCompositeGroup called with minimum and maximum periods for an ultra quick flash.

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::occultingNoGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate an occulting signal sequence Offtime = P/10.

(or the minimum flash time); ontime = P - offtime Returns [ontime][offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::occultingSimpleGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate an occulting group signal sequence, A simple group is one that just indicates a group size, like (4).

Offtime = P/(20.*G) (or the minimum flash time); ontime = P/(2.*G) - offtime Returns [ontime][offtime] for all but the last group, then [ontime], then [P/2. + offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::occultingCompositeGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate an occulting composite group signal sequence.

returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::alternatingNoGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate an alternating signal sequence Offtime = 0.

; ontime = P/2. Returns [ontime][offtime][ontime][offtime] Note: a color switch happens ach time a multicolor light switches from off to on; the existence of the offtime, even though it is 0., will cause the light to switch to the next color

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::alternatingSimpleGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate an alternating group signal sequence, A simple group is one that just indicates a group size, like (4).

Ontime = P/(4.*G); offtime = 0. Returns [ontime][offtime][ontime][offtime] for all but the last group, then [ontime][offtime][ontime], then [P/2. + offtime]

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::alternatingCompositeGroup	(	float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

Generate an alternating composite group signal sequence.

returns empty sequence [] ; prints 'unimplemented'

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::baseCompositeGroup	(	float	minFlashPeriod,
		float	maxFlashPeriod,
		float	period,
		const DtLightMarkerStringParser::SignalGroup &	signalGroup
	)		const

protectedvirtual

virtual SignalGroupType makVrv::DtLightSignalSequenceGenerator::signalGroupType ( const DtLightMarkerStringParser::SiggrpData & data ) const

protectedvirtual

Determine the signal group type based on the parsed signal group data.

virtual DtNavigationLightController::SignalSequence makVrv::DtLightSignalSequenceGenerator::morseCodeSequence ( char character ) const

protectedvirtual

Get the morse code sequence for the indicated character.

static float makVrv::DtLightSignalSequenceGenerator::sumSignalSequence ( DtNavigationLightController::SignalSequence sequence )

static

Calculate the total time for the specified sequence or sequence fragment.

static void makVrv::DtLightSignalSequenceGenerator::printSignalSequence ( const DtNavigationLightController::SignalSequence & seq )

static

Prints the sequence to std::cout. No newline is printed.

Friends And Related Function Documentation

friend class DtLightSignalSequenceGeneratorCreator

friend

The class may only be instantiated through the friend creator.

Member Data Documentation

float makVrv::DtLightSignalSequenceGenerator::myMaximumLongFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myMinimumLongFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myMaximumFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myMinimumFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myMaximumQuickFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myMinimumQuickFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myMaximumVeryQuickFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myMinimumVeryQuickFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myMinimumUltraQuickFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myMaximumUltraQuickFlashPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myDefaultMorseCodeDot

protected

float makVrv::DtLightSignalSequenceGenerator::myDefaultMorseCodeDash

protected

float makVrv::DtLightSignalSequenceGenerator::myDefaultMorseCodeDotDashSpacing

protected

float makVrv::DtLightSignalSequenceGenerator::myDefaultMorseCodeLetterSpacing

protected

float makVrv::DtLightSignalSequenceGenerator::myDefaultMorseCodeGroupSpacing

protected

float makVrv::DtLightSignalSequenceGenerator::myDefaultAlternatingPeriod

protected

float makVrv::DtLightSignalSequenceGenerator::myOnTimeFraction

protected

MorseCodeMap makVrv::DtLightSignalSequenceGenerator::myMorseCodeMap

protected

The documentation for this class was generated from the following file:

/data/exports/nrhent7-1/nightly/docs/vrForces.vrf4-10-branch/include/vrvCore/DtLightSignalSequenceGenerator.h

Public Types

Public Member Functions

Static Public Member Functions

Protected Types

Protected Member Functions

Protected Attributes

Friends

Detailed Description

Member Typedef Documentation

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation

Member Data Documentation