The interface for a model of a rotorWash. More...

Inheritance diagram for makVrv::DtRotorWashModel:

Public Member Functions
	DtRotorWashModel (DtDe &de, DtUniqueID id)
	CTOR. More...

virtual	~DtRotorWashModel ()
	DTOR. More...

virtual const std::string &	className () const
	Return the class name of this model. More...

virtual void	setModelDefinition (const std::string &def)
	Override the set model definition function. More...

virtual void	addToScene (const DtUniqueID &id, int modelSet, int visualizerType)
	Attaches the model to the scene If this model has a modelinstance, it is attached to the scene. More...

virtual void	removeFromScene ()
	Detaches the model to the scene If this model has a modelinstance, it is detached to the scene. More...

virtual void	setIsSupportModel (bool isSupport)
	Unused, but required for all DtModels. More...

virtual void	start ()
	Start the rotorwash effect. More...

virtual void	stop ()
	Stop the rotor wash effect. More...

virtual void	setOffsetPos (const DtVector &offset)
	Position the rotor wash system via an offset vector (x,y,z) More...

virtual void	setVisible (bool isVisible)
	Set the visible state of the model. More...

virtual bool	isStopped ()
	Get whether the rotorwash has stopped. More...

virtual void	setIntensity (const float intensity)
	Set intensity of system 0 is no intensity, 1 is full intensity See. More...

virtual void	setRotorWashDir (DtVector dir)
	Set direction of coming out of the bottom of the helicopter to aid in positioning the rotorwash. More...

virtual void	update ()
	For updating any values needed for rotor wash. More...


virtual void	setRotorDiameter (double diameter)
	Set/get the diameter of the rotors (tip to tip) More...

virtual double	rotorDiameter () const


virtual void	setDefaultRotorDiameter (double diameter)
	Set/get the default diameter of the rotors (tip to tip) if setRotorDiameter is not called (returns -1 if no rotor diameter or default diameter set) More...

virtual double	defaultRotorDiameter () const


virtual void	setRotorWindSpeed (double speed)
	Set/get the speed of the down-draft created by the rotors. More...

virtual double	rotorWindSpeed () const


virtual void	setDefaultRotorWindSpeed (double speed)
	Set/get the default speed of the down-draft created by the rotors if setRotorWindSpeed is not called (returns -1 if no rotor wind speed or default rotor wind speed set) More...

virtual double	defaultRotorWindSpeed () const


virtual void	setHelicopterID (DtUniqueID helicopterID)
	Set/get the helicopter ID this rotorwash is attached to. More...

virtual DtUniqueID	helicopterID ()

Public Member Functions inherited from makVrv::DtModel
	DtModel (DtDe &de, DtUniqueID id)
	CTOR. More...

virtual	~DtModel ()
	DTOR. More...

DtModelInstance *	createModelInstance (const std::string &modelDefName, bool realize=true)
	Set the model definition and creates an instance of the model. More...

virtual const std::string &	modelDefinitionName ()
	returns the model definition name. More...

virtual void	saveModelToFile (const std::string &filename)

unsigned int	transformSize () const
	Get the number of position/orientations this model has. More...

virtual void	setPosition (int vtx, const DtVector &position)
	Set the position of a control vertex in the model. More...

virtual const DtVector &	position (int vtx=0) const
	Get the Position of a given point. More...

virtual void	removePosition (int vtx)
	Remove a transform at the given position. More...

virtual void	setPositionOffset (const DtVector &positionOffset)
	Set the position offset of the model. More...

virtual const DtVector &	positionOffset () const
	Get the Position Offset of the model. More...

virtual void	setOrientation (int vtx, const DtTaitBryan &orientation)
	Set the orientation of a vertex in the model. More...

virtual void	setPositionAndOrientation (int vtx, const DtVector &positionOffset, const DtTaitBryan &orientation)
	Set the position and orientation of a vertex in the model at the same time. More...

virtual const DtTaitBryan &	orientation (int vtx=0) const
	Get the Orientation of a given point. More...

virtual void	setOrientationOffset (const DtTaitBryan &orientationOffset)
	Set the Orientation Offset of the model. More...

virtual const DtTaitBryan &	orientationOffset () const
	Get the Orientation Offset of the model. More...

virtual void	enableColorBlending (bool b)
	Enable / disable color blending for this model. More...

virtual void	setBlendColor (float r, float g, float b, float a)
	Set color to use if color blending is enabled. More...

virtual void	getBlendColor (float &r, float &g, float &b, float &a)
	Returns the blend color. More...

virtual bool	colorBlendingEnabled () const
	Returns whether or not blending is enabled. More...

virtual void	setColor (float r, float g, float b, float a)
	set the model's color More...

virtual void	enableLighting (bool l)
	set whether the model is lit; this may not be an option on all models More...

virtual int	modelSet () const
	Get the model set this model is part of. More...

const DtVector &	boundingBoxExtents () const
	Get the bounding box extents of the model instance. More...

void	getBoundingBoxExtents (double &x, double &y, double &z) const
	Get the bounding box extents of the model instance. More...

const DtVector &	boundingBoxCenter () const
	Get the bounding box center of the model instance. More...

virtual void	getBoundingBoxCenter (double &x, double &y, double &z) const
	Get the bounding box center of the model instance. More...

virtual void	getBoundingBoxComponents (DtVector &minimum, DtVector &maximum)
	Get the minimum and maximum X,Y,Z components of the bounding box. More...

void	setContributesToBound (bool trueOrFalse)
	Set whether this model instance contributes to an object's overall bounding volume. More...

bool	contributesToBound () const
	Get whether this model instance contributes to an object's overall bounding volume. More...

DtDe &	de ()
	Get the DtDe object. More...

virtual void	setModelInstance (DtModelInstance *modelInstance)
	Internally set the model instance pointer. More...

virtual void	promoteBackgroundModelInstance (DtModelDefinition &defintion)
	Internally set the model instance pointer to the background one, also realizes and sends signal. More...

virtual bool	visible () const
	Get the visible state of the model. More...

DtUniqueID	parentSceneObjectID () const
	Parent of the model. More...

virtual void	addedToSceneObjectAsProp (const DtUniqueID &sceneObj)
	Called when a scene object added the model as a prop. More...

virtual void	addedToSceneObject (const DtUniqueID &sceneObj, int modelSet, int visualizerType)
	Called when a scene object added the model with the given model set and visualizer type. More...

virtual void	setElementId (DtUniqueID id)
	Called when the element ID of the model's parent object is set. More...

virtual void	removedFromSceneObject ()
	Called when the model was removed from a scene object. More...

virtual void	setSolid (bool isSolid)
	Set whether or not other this model is drawn filled in. More...

virtual bool	isProp ()
	Return whether or not this model was added as a prop. More...

virtual void	updateMinLastFrameDistance (float distance)
	updates the closest distance to an observer over the last frame More...

virtual void	resetLastFrameDistance ()
	resets the closest distance to an observer More...

virtual float	minLastFrameDistance () const
	gets the closest distance to an observer last frame More...

virtual DtModelInstance *	modelInstance ()
	Get the model instance. More...

virtual const DtModelInstance *	modelInstance () const

int	visualizerType () const
	The visualizer type determines which channel-specific group node this model will be parented to, and consequently, which observer setting will cause it to be rendered in which channel. More...

virtual bool	supportsMultithreadedLoad ()
	can be quickly overridden to disable background loading More...

virtual void	backgroundLoad ()
	the chunk of loading that can safely happen in the background More...

virtual void	foregroundLoad ()
	the chunk of loading that must happen happen in the foreground, adding to scene graph etc. More...

virtual bool	isActivelyBackgroundLoading ()
	is this being actively loaded (it has a myInLoadQueueHandle object and it's loading) More...

virtual DtLoaderHandle *	getLoadQueueHandle ()
	returns the load queue object More...

Protected Member Functions
virtual DtRotorWashModelInstanceInterface *	rotorWashModelInstanceInterface ()
	Get a properly cast version of the model instance this model creates. More...

virtual const DtRotorWashModelInstanceInterface *	rotorWashModelInstanceInterface () const
	Get a properly cast const version of the model instance this model creates. More...

virtual DtVector	currentHeloPosition () const
	Get the helo's current position that this rotorWash is attached to. More...

virtual DtTaitBryan	currentHeloOrientation () const
	Ge the helo's current orientation that this rotorWash is attached to. More...

virtual DtSceneObject *	sceneObject () const
	Get the scene object that owns this model (and the ship's model) More...

virtual void	calcRotorWashSystemDefaults ()
	Set default values for rotor wash. More...

virtual void	setIsOverWater (bool overWater)
	Called by the rotorWash updater to tell us if we are over water. More...

virtual bool	anyObserverMimic ()
	We don't want to hide the rotorwash when in mimic mode so check if any observer in is mimic or mimic track. More...

virtual void	slot_oceanAddedToScene ()
	If a rotorWash is requested and Triton hasn't been initialized, this model connects to the DtTritonManager's signal_addedToScene signal, and creates the rotorWash (and disconnects) when the signal is raised. More...

Protected Member Functions inherited from makVrv::DtModel
virtual void	addToSceneAsProp (const DtUniqueID &sceneObjectId)
	Add this model to the scene as a prop. More...

virtual void	initializeModelInstance ()
	Push any state maintained by the model to the model instance. More...

void	slot_modelInstanceChanged (DtModelInstance *instance)
	Called when the model instance changed. More...

virtual void	waitAndClearLoadHandle ()
	avoids race condition, on destruction subclasses need to wait for the model to cleanly finish loading this can happen if an object times in and out very quickly More...

virtual void	removedFromLoadQueue ()
	deletes the myInLoadQueueHandle handle More...

virtual void	setDoneBackgroundLoading ()
	called by async task, updates myCurrentlyLoading atomic More...

virtual void	setActivelyBackgroundLoading ()
	called right before tbb task creation More...

Protected Attributes
DtSignalConnectionManager	myConnections

bool	myRotorWashStopped

DtUniqueID	myHelicopterID

Protected Attributes inherited from makVrv::DtModel
DtLoaderHandle *	myInLoadQueueHandle

DtDe &	myDe

const DtUniqueID	myUniqueId
	The unique id is constant after initialization. More...

bool	myColorBlendingEnabled
	The color blending enabled is needed to be set by the derived class so it doesn't get down to the model instances when instancing is enabled. More...

DtModelInstance *	myBackgroundModelInstance
	holds the model created in the background for a bit More...

float	myMinLastFrameDistance
	last frames mimimal distance to the camera, calculated by the instancing system More...

TransformList	myTransforms
	We keep our own copy in case we get updates before we get a model instance. More...

DtModelInstance *	myModelInstance

int	myModelSet

int	myVisualizerType

bool	myContributesToBound

DtUniqueID	myParentSceneObjectID

bool	myIsPropFlag

float	myBlendColor [4]

bool	myVisibleFlag

DtVector	myPositionOffset

DtTaitBryan	myOrientationOffset

std::string	myModelDefinitionName

Friends
class	DtRotorWashDistributor

Additional Inherited Members
Public Attributes inherited from makVrv::DtModel
boost::signalslib::signal < void(DtModel *)>	signal_modelToBeDestroyed
	Signal emitted when the model is to be destroyed. More...

boost::signalslib::signal < void(DtModel *)>	signal_modelChanged

boost::signalslib::signal < bool(DtModel *, bool), SlotReturnOR >	signal_visibilityChangeRequested
	Signal when the visibility has been requested, if any slot returns false, it will not change. More...

boost::signalslib::signal < void(DtModelInstance , DtModel )>	signal_modelInstanceCreated
	Signal emitted when the model instance is created. More...

boost::signalslib::signal < void(DtModelInstance , DtModel )>	signal_modelInstanceToBeDestroyed
	Signal emitted when the model instance is to be destroyed. More...

Protected Types inherited from makVrv::DtModel
typedef std::vector < ObjectTransform >	TransformList

Static Protected Attributes inherited from makVrv::DtModel
static bool	theInittedState

Detailed Description

The interface for a model of a rotorWash.

Constructor & Destructor Documentation

makVrv::DtRotorWashModel::DtRotorWashModel	(	DtDe &	de,
		DtUniqueID	id
	)

CTOR.

virtual makVrv::DtRotorWashModel::~DtRotorWashModel ( )

virtual

DTOR.

Member Function Documentation

virtual const std::string& makVrv::DtRotorWashModel::className ( ) const

virtual

Return the class name of this model.

Reimplemented from makVrv::DtModel.

Reimplemented in makVrv::DtOsgRotorWashModel.

virtual void makVrv::DtRotorWashModel::setModelDefinition ( const std::string & def )

virtual

Override the set model definition function.

Use this to parse a model after it is loaded.

Reimplemented from makVrv::DtModel.

virtual void makVrv::DtRotorWashModel::setRotorDiameter ( double diameter )

virtual

Set/get the diameter of the rotors (tip to tip)

virtual double makVrv::DtRotorWashModel::rotorDiameter ( ) const

virtual

virtual void makVrv::DtRotorWashModel::setDefaultRotorDiameter ( double diameter )

virtual

Set/get the default diameter of the rotors (tip to tip) if setRotorDiameter is not called (returns -1 if no rotor diameter or default diameter set)

virtual double makVrv::DtRotorWashModel::defaultRotorDiameter ( ) const

virtual

virtual void makVrv::DtRotorWashModel::setRotorWindSpeed ( double speed )

virtual

Set/get the speed of the down-draft created by the rotors.

virtual double makVrv::DtRotorWashModel::rotorWindSpeed ( ) const

virtual

virtual void makVrv::DtRotorWashModel::setDefaultRotorWindSpeed ( double speed )

virtual

Set/get the default speed of the down-draft created by the rotors if setRotorWindSpeed is not called (returns -1 if no rotor wind speed or default rotor wind speed set)

virtual double makVrv::DtRotorWashModel::defaultRotorWindSpeed ( ) const

virtual

virtual void makVrv::DtRotorWashModel::addToScene	(	const DtUniqueID &	id,
		int	modelSet,
		int	visualizerType
	)

virtual

Attaches the model to the scene If this model has a modelinstance, it is attached to the scene.

Implements makVrv::DtModel.

Reimplemented in makVrv::DtOsgRotorWashModel.

virtual void makVrv::DtRotorWashModel::removeFromScene ( )

virtual

Detaches the model to the scene If this model has a modelinstance, it is detached to the scene.

Implements makVrv::DtModel.

Reimplemented in makVrv::DtOsgRotorWashModel.

virtual void makVrv::DtRotorWashModel::setIsSupportModel ( bool isSupport )

virtual

Unused, but required for all DtModels.

Implements makVrv::DtModel.

virtual void makVrv::DtRotorWashModel::start ( )

virtual

Start the rotorwash effect.

virtual void makVrv::DtRotorWashModel::stop ( )

virtual

Stop the rotor wash effect.

virtual void makVrv::DtRotorWashModel::setOffsetPos ( const DtVector & offset )

virtual

Position the rotor wash system via an offset vector (x,y,z)

virtual void makVrv::DtRotorWashModel::setVisible ( bool isVisible )

virtual

Set the visible state of the model.

Parameters

[in] isVisible is the new visible state; true = visible, false = hidden. There is a special case for mimic mode, we want the active rotor wash to continue being visible

Reimplemented from makVrv::DtModel.

virtual bool makVrv::DtRotorWashModel::isStopped ( )

virtual

Get whether the rotorwash has stopped.

virtual void makVrv::DtRotorWashModel::setIntensity ( const float intensity )

virtual

Set intensity of system 0 is no intensity, 1 is full intensity See.

See Also: DtRotorWashModelInstanceInterface

virtual void makVrv::DtRotorWashModel::setRotorWashDir ( DtVector dir )

virtual

Set direction of coming out of the bottom of the helicopter to aid in positioning the rotorwash.

virtual void makVrv::DtRotorWashModel::update ( )

virtual

For updating any values needed for rotor wash.

virtual void makVrv::DtRotorWashModel::setHelicopterID ( DtUniqueID helicopterID )

virtual

Set/get the helicopter ID this rotorwash is attached to.

virtual DtUniqueID makVrv::DtRotorWashModel::helicopterID ( )

virtual

virtual DtRotorWashModelInstanceInterface* makVrv::DtRotorWashModel::rotorWashModelInstanceInterface ( )

protectedvirtual

Get a properly cast version of the model instance this model creates.

virtual const DtRotorWashModelInstanceInterface* makVrv::DtRotorWashModel::rotorWashModelInstanceInterface ( ) const

protectedvirtual

Get a properly cast const version of the model instance this model creates.

virtual DtVector makVrv::DtRotorWashModel::currentHeloPosition ( ) const

protectedvirtual

Get the helo's current position that this rotorWash is attached to.

virtual DtTaitBryan makVrv::DtRotorWashModel::currentHeloOrientation ( ) const

protectedvirtual

Ge the helo's current orientation that this rotorWash is attached to.

virtual DtSceneObject* makVrv::DtRotorWashModel::sceneObject ( ) const

protectedvirtual

Get the scene object that owns this model (and the ship's model)

virtual void makVrv::DtRotorWashModel::calcRotorWashSystemDefaults ( )

protectedvirtual

Set default values for rotor wash.

Defaults can be set multiple times. If someone uses a set function (ex. setRotorDiameter) then setDefaultRotorDiameter doesn't do anything.

virtual void makVrv::DtRotorWashModel::setIsOverWater ( bool overWater )

protectedvirtual

Called by the rotorWash updater to tell us if we are over water.

virtual bool makVrv::DtRotorWashModel::anyObserverMimic ( )

protectedvirtual

We don't want to hide the rotorwash when in mimic mode so check if any observer in is mimic or mimic track.

virtual void makVrv::DtRotorWashModel::slot_oceanAddedToScene ( )

protectedvirtual

If a rotorWash is requested and Triton hasn't been initialized, this model connects to the DtTritonManager's signal_addedToScene signal, and creates the rotorWash (and disconnects) when the signal is raised.

Friends And Related Function Documentation

friend class DtRotorWashDistributor

friend

Member Data Documentation

DtSignalConnectionManager makVrv::DtRotorWashModel::myConnections

protected

bool makVrv::DtRotorWashModel::myRotorWashStopped

protected

DtUniqueID makVrv::DtRotorWashModel::myHelicopterID

protected

The documentation for this class was generated from the following file:

/data/exports/nrhent7-1/nightly/docs/vrForces.vrf4-10-branch/include/vrvCore/DtRotorWashModel.h

Public Member Functions

Protected Member Functions

Protected Attributes

Friends

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation

Member Data Documentation