DtAggregateReleaseBombControllerDescriptor Class Reference

DtAggregateReleaseBombControllerDescriptor is a DtComponentDescriptor that has additional information needed for providing parameters to an AggregateReleaseBomb controller. More...

Inheritance diagram for DtAggregateReleaseBombControllerDescriptor:

Public Member Functions
	DtAggregateReleaseBombControllerDescriptor (const DtString &name, DtReaderWriterRegistry *parentRegistry=0)
	constructor
	DtAggregateReleaseBombControllerDescriptor (const DtAggregateReleaseBombControllerDescriptor &orig, DtReaderWriterRegistry *parentRegistry=0)
	copy constructor
DtAggregateReleaseBombControllerDescriptor &	operator= (const DtAggregateReleaseBombControllerDescriptor &orig)
	assignment
virtual	~DtAggregateReleaseBombControllerDescriptor ()
	destructor
virtual DtString	type () const
	Returns the type of component this descriptor describes.
virtual DtComponentDescriptor *	clone (DtReaderWriterRegistry *parentRegistry=0) const
virtual DtString	weaponName () const
	Accessor/mutator for myWeaponName.
virtual void	setWeaponName (const DtString &)
virtual double	range () const
	Accessor/mutator for myRange.
virtual void	setRange (double)
virtual double	radius () const
	Accessor/mutator for myRadius.
virtual void	setRadius (double)
virtual double	maxSheafRadius () const
	Accessor/mutator for myMaxSheafRadius.
virtual void	setMaxSheafRadius (double)
virtual double	hitFactor () const
	Accessor/mutator for myHitFactor.
virtual void	setHitFactor (double)
virtual int	strengthPerBomb () const
	Accessor/mutator for myStrengthPerBomb.
virtual void	setStrengthPerBomb (int)
virtual double	secondsPerBomb () const
	Accessor/mutator for mySecondsPerAttack.
virtual void	setSecondsPerBomb (double)
virtual int	bombsPerAttack () const
	Accessor/mutator for myBombsPerAttack.
virtual void	setBombsPerAttack (int)
virtual DtString	damageType () const
	Accessor/mutator for myDamageType.
virtual void	setDamageType (const DtString &)
virtual std::set< DtString >	availablePostures () const
	Accessor/mutator for myAvailablePosturesSet.
virtual void	setAvailablePostures (const std::set< DtString > &)
virtual DtString	availablePosturesString () const
	Accessor/mutator for myAvailablePostures.
virtual void	setAvailablePosturesString (const DtString &)
virtual const DtReal	jammingDefenseFactor () const
	Accessor/mutator for myJammingDefenseFactor.
virtual void	setJammingDefenseFactor (const DtReal factor)
virtual const bool	canBeRadarJammed () const
	Accessor/mutator for myCanBeRadarJammed.
virtual void	setCanBeRadarJammed (const bool jammable)
Public Member Functions inherited from DtScriptEnableControllerDescriptor
	DtScriptEnableControllerDescriptor (const DtString &name, DtReaderWriterRegistry *parentRegistry=0)
	constructor
	DtScriptEnableControllerDescriptor (const DtScriptEnableControllerDescriptor &orig, DtReaderWriterRegistry *parentRegistry=0)
	copy constructor
DtScriptEnableControllerDescriptor &	operator= (const DtScriptEnableControllerDescriptor &orig)
	assignment
virtual	~DtScriptEnableControllerDescriptor ()
	destructor
virtual const DtRwNLengthStringVector &	scriptIds () const
	Accessor/mutator for myScriptIds.
virtual DtRwNLengthStringVector &	scriptIds ()
virtual const DtRwScriptVariablesList &	scriptVariables () const
	Accessor/mutator for myScriptIds.
virtual DtRwScriptVariablesList &	scriptVariables ()
Public Member Functions inherited from DtComponentDescriptor
	DtComponentDescriptor (const DtComponentDescriptor &orig, DtReaderWriterRegistry *parentRegistry=NULL)
	copy constructor
DtComponentDescriptor &	operator= (const DtComponentDescriptor &orig)
	assignment
virtual	~DtComponentDescriptor ()
virtual void	putData (std::string &fp, int indentLevel=0)
	Overrides base class putData to output our type.
virtual DtlObjPtr	getData (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths, const DtVariableBindingsList &variableBindings)
	getData is just used to get us past the type in the data stream, since it's not actually stored.
virtual bool	init ()
	Base class init does nothing, but will be called by createComponentDescriptor(), allowing derived classes to do memory allocation if necessary.
bool	operator== (const DtComponentDescriptor &) const
	DtComponentDescriptor (const DtString &componentName, DtReaderWriterRegistry *parentRegistry=NULL)
	DtComponentDescriptor (const DtSymbolString &componentName, DtReaderWriterRegistry *parentRegistry=NULL)
virtual void	setComponentType (const DtString &componentType)
	Type of DtSimComponent this descriptor is associated with.
virtual const DtString &	componentType () const
virtual void	setMinTickPeriod (DtReal minTickPeriod)
virtual DtReal	minTickPeriod () const
virtual void	setMinTickPeriodVariance (DtReal minTickPeriodVariance)
virtual DtReal	minTickPeriodVariance () const
virtual void	setTickPeriodUsesRealTime (bool value)
	Accessor/mutator for myTickPeriodUsesRealTime.
virtual bool	tickPeriodUsesRealTime () const
virtual const DtString &	processStateRepositoryName () const
	Name which this component will assign to its PSR.
virtual void	setProcessStateRepositoryName (const DtString &name)
virtual const DtString &	processStateRepositoryType () const
	Type of PSR this component will create.
virtual void	setProcessStateRepositoryType (const DtString &type)
virtual void	setIsEnabled (bool yesNo)
	Is the component enabled or not.
virtual bool	isEnabled () const
virtual void	setDebugActive (bool active)
	Should detailed debug info be printed for this component.
virtual bool	debugActive () const
virtual void	setMinTaskVisualizationTickPeriod (DtReal minTickPeriod)
virtual DtReal	minTaskVisualizationTickPeriod () const
virtual void	setCreateComponent (bool yesNo)
	Should the component be created or not.
virtual bool	createComponent () const
virtual void	setCreateOnRemoteObject (bool yesNo)
	Whether or not this component is created on remote versions of the object.
virtual bool	createOnRemoteObject () const
Public Member Functions inherited from DtReaderWriter
	DtReaderWriter ()
	default constructor
	DtReaderWriter (const DtString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false)
	real constructor Setting the readonly flag prevents object from writing itself to the stream.
	DtReaderWriter (const DtSymbolString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false)
	DtReaderWriter (const DtString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL)
	pseudo-copy constructor
	DtReaderWriter (const DtSymbolString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL)
	DtReaderWriter (const DtReaderWriter &, DtReaderWriterRegistry *parentRegistry=NULL)
	copy constructor
const DtReaderWriter &	operator= (const DtReaderWriter &orig)
	assignment operator
bool	operator== (const DtReaderWriter &) const
	Equivalence operator.
bool	operator!= (const DtReaderWriter &rhs)
virtual	~DtReaderWriter ()
	destructor
virtual void	putSelf (std::string &fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename())
	Top level call to write itself to file.
virtual void	postPutSelf ()
	Called after either version of put self (file or environment). Default is no-op.
virtual void	prePutSelf ()
	Called before either version of put self (file or environment). Default is no-op.
virtual void	getSelf (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &variableBindings=nullVariableReference())
	Top level to read itself from an input stream.
virtual void	postGetSelf ()
	Called after either version of getSelf (mtl or environment). Default is no-op.
virtual void	preGetSelf ()
	Called before either version of get self (file or environment). Default is no-op.
virtual void	writeSelf (std::string &fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename())
	Called from putSelf, calls myRegistry.putSelf which in turn calls putSelf on each reader/writer in the registry.
virtual DtSymbolString	name () const
	Accessor for name of this readable/writable object.
virtual void	addAlias (const DtSymbolString &alias)
	Add an alias as an alternative name for this object.
virtual void	addAlias (const DtString &alias)
virtual bool	hasAlias (const DtSymbolString &alias)
virtual const aliasContainer &	aliases () const
virtual void	setReadonly (bool flag)
	Set read-only flag.
bool	isReadonly () const
virtual void	reset ()
	For those reader/writer items that support it, resets the reader/writer value to iriginal state Default is no-op.
virtual int	alignment () const
	For those items that are sent over the network via HLA, this will give the network alignment.
virtual bool	variableIsBound () const
virtual void	unbindVariable ()
	Sets the myVariableIsBound flag to false.
virtual void	setName (const DtString &)
	Set the name of the object.
virtual const char *	readerWriterType () const
	Used to supply a string type that this reader writer type is.
virtual const char *	xmlType () const
virtual DtString	prettyPrint () const
	Routine to return a human readable form of the reader/writer variable.
std::string	debugText () const
virtual void	bindVariables (DtVariableBindingsList variableBindings)
	Runs a variable binding pass on this reader writer and any of its children.
virtual std::list < DtVariableNameType >	unboundVariables () const
bool	invalid () const
virtual bool	hasChild (const DtReaderWriter *p) const
	Returns true if this variable has a child p in it's chain.
virtual bool	hasVariableReference () const
	Returns true if this item or any item in the registry (recursive) is a variable reference.
virtual void	bindLocalVariables (const DtVariableBindingsList &variableBindings)
	Checks to see if this RW object is a variable reference that can be bound using the provided bindings.
virtual void	recordUpdateTime () const
	Can be implemented in subclasses to stamp the time when updated.
virtual bool	wasUpdatedSince (DtTime t) const
	Can be implemented in subclasses to return true if an update occurred after the specified time.
virtual DtlObjPtr	getData (DtlObjPtr args, const SearchPaths &searchPaths, const DtVariableBindingsList &variableBindings)
virtual void	setValueSpecified (bool specified, bool recurse=false)
	The specified flags are used for optional values.
virtual bool	valueSpecified () const
virtual bool	isVariableReference () const
	Specifies whether or not this reader writer is really a variable that is specified elsewhere.
virtual void	setIsVariableReference (bool value)
virtual void	clearAllVariableReferenceFlags ()
	Clears out all variable reference flags from all readerwriter items in registry recursively.
virtual DtSymbolString	variableName () const
	The variable name, if this object is a variable reference.
virtual void	setVariableName (const DtSymbolString variableName)
virtual const DtReaderWriter *	defaultRWValue () const
	The default value to use if the reader/writer object is a variable and that variable is not specified.
virtual DtReaderWriter *	defaultRWValue ()
virtual void	setDefaultRWValue (DtReaderWriter *)
	Previous default value, if exists, will be removed and replaced with a clone of the supplied variable.
virtual bool	checkAndSetDefaultRWValue (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &variableBindings=nullVariableReference())
	Give the stream, if the stream contains a default value then set it here.
const DtReaderWriterRegistry &	registry () const
	Collection of child DtReaderWriter nodes owned by this object.
DtReaderWriterRegistry &	registry ()
virtual DtPropertyInterface *	property ()
virtual const DtPropertyInterface *	property () const
virtual DtString	toXml () const
virtual bool	toXml (const DtFilename &) const
	Writes contents of xml result to the given filename.
virtual bool	fromXml (const DtString &)
	Restores object from given xml string. Returns true if valid.
virtual bool	fromXmlFile (const DtFilename &)
	Restires object from given xml file.
virtual void	putSelf (DtEnvironmentSP, DtEnvValueSP parent) const
virtual void	putData (DtEnvironmentSP, DtEnvValueSP value) const
	Override to add attributes of actual data.
virtual void	putVariableReference (DtEnvironmentSP, DtEnvValueSP value) const
	Called when the item is a variable reference.
virtual void	getSelf (const DtEnvironmentSP, const DtEnvValueSP root, const SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &bindings=DtVariableBindingsList())
virtual void	getData (const DtEnvironmentSP, const DtEnvValueSP, const SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &bindings=DtVariableBindingsList())
	Gets data from the environment value.
virtual void	unrecognizedItem (const DtEnvironmentSP env, const DtEnvValueSP root, const SearchPaths &searchPaths, const DtVariableBindingsList &varBindings)
	Called when the xml reader tries to parse an unknown reader/writer item. Default is a no-op.
virtual void	getVariableReference (DtEnvironmentSP, DtEnvValueSP value)
	Called when the item is a variable reference.

Static Public Member Functions
static DtComponentDescriptor *	creator ()

Protected Member Functions
	DtAggregateReleaseBombControllerDescriptor ()
	default constructor
Protected Member Functions inherited from DtScriptEnableControllerDescriptor
	DtScriptEnableControllerDescriptor ()
	default constructor
Protected Member Functions inherited from DtComponentDescriptor
	DtComponentDescriptor ()
	default constructor; not implemented
Protected Member Functions inherited from DtReaderWriter
virtual void	bindToRwAsVariable (const DtReaderWriter *rw)
	Copies values from the specified DtReaderWriter.
Protected Member Functions inherited from DtObjectDebugger< DtReaderWriter >
	DtObjectDebugger ()
	DtObjectDebugger (const DtObjectDebugger &)
	~DtObjectDebugger ()

Protected Attributes
parameters
These parameters are available for setting in the OPD files.
DtRwString	myWeaponName
	Parameter Name: weapon-name Parameter Description: The name of the type of bomb.
DtRwReal	myRange
	Parameter Name: range Parameter Description: The range (in meters) from the target the unit must be to release a bomb.
DtRwReal	myRadius
	Parameter Name: radius Parameter Description: The radius (in meters) of the blast caused by the bomb.
DtRwReal	myMaxSheafRadius
	Parameter Name: max-sheaf-radius Parameter Description: The maximum radius (in meters) of the pattern of bursts created by firing bombs-per-attack rounds with this weapon.
DtRwReal	myHitFactor
	Parameter Name: hit-factor Parameter Description: The effectiveness of the guidance capabilities of this bomb type.
DtRwInt	myStrengthPerBomb
	Parameter Name: strength-per-bomb Parameter Description: The amount of damage a single bomb can cause.
DtRwReal	mySecondsPerAttack
	Parameter Name: seconds-per-bomb Parameter Description: The length of time it takes to drop a single bomb.
DtRwInt	myBombsPerAttack
	Parameter Name: bombs-per-attack Parameter Description: The number of bombs that are released at once in an attack.
DtRwString	myDamageType
	Parameter Name: damage-type Parameter Description: The type of damage the bomb deals.
DtRwString	myAvailablePostures
	Parameter Name: available-postures Parameter Description: The list of postures in which this task is available.
std::set< DtString >	myAvailablePosturesSet
	The set is updated when myAvailablePostures is first accessed.
DtRwBoolean	myCanBeRadarJammed
	Parameter Name: can-be-radar-jammed Parameter Description: True if this system uses radar and is therefore susceptible to radar jamming.
DtRwReal	myJammingDefenseFactor
	Parameter Name: jamming-defense-factor Parameter Description: A defensive strength against jamming.
Protected Attributes inherited from DtScriptEnableControllerDescriptor
DtRwNLengthStringVector	myScriptIds
	Parameter Name: script-ids Parameter Description: List of script IDs that are enabled by this controller.
DtRwScriptVariablesList	myScriptVariables
	Parameter Name: script-variables Parameter Description: List of script variables that can be referenced in a lua script by the given script id.
Protected Attributes inherited from DtComponentDescriptor
DtRwString	myComponentType
	Parameter Name: component-type Parameter Description: String identifying type of component.
DtRwReal	myMinTickPeriod
	Parameter Name: min-tick-period Parameter Description: Average tick period for this component.
DtRwReal	myMinTickPeriodVariance
	Parameter Name: min-tick-period-variance Parameter Description: A time range for the tick period.
DtRwBoolean	myTickPeriodUsesRealTime
	Parameter Name: tick-period-uses-real-time Parameter Description: Specified whether the component uses real-time (instead of simulation-time) to determine when it is time to tick.
DtRwString	myProcessStateRepositoryName
	Parameter Name: process-state-repository-name Parameter Description: Name of the process state repository associated with this component.
DtRwString	myProcessStateRepositoryType
	Parameter Name: process-state-repository-type Parameter Description: Type of the process state repository associated with this component.
DtRwBoolean	myIsEnabled
	Parameter Name: is-enabled Parameter Description: Is the component enabled (allowed to tick) or not.
DtRwBoolean	myDebug
	This parameter defaults to false.
DtRwReal	myMinTaskVisualizationTickPeriod
	Parameter Name: min-task-visualization-tick-period Parameter Description: Average tick period for this component's task visualizations.
DtRwBoolean	myCreateComponent
DtRwBoolean	myCreateOnRemoteObject
	Parameter Name: create-on-remote-object Parameter Description: If true, this component will be created on remote objects as well as local.
Protected Attributes inherited from DtReaderWriter
const DtSymbolString	myName
DtReaderWriterRegistry	myRegistry
DtReaderWriterRegistry *	myParentRegistry
bool	myValueSpecified
bool	myReadOnlyFlag
bool	myIsVariableReference
DtSymbolString	myVariableName
bool	myVariableIsBound
DtReaderWriter *	myDefaultValue
aliasContainer	myAliases
	Container for the aliases which represent alternative names for the object.
bool	myInvalid
	Set to true if there is a problem reading this item.

Additional Inherited Members
Public Types inherited from DtReaderWriter
typedef std::vector < DtSymbolString >	aliasContainer
typedef std::vector < DtSymbolString >::iterator	aliasIter
typedef std::vector < DtSymbolString > ::const_iterator	aliasConstIter
typedef std::vector< DtFilename >	SearchPaths
typedef std::pair < DtSymbolString, DtString >	DtVariableNameType
typedef DtReaderWriterFactory *(*	DtReaderWriterFactoryCreatorFcn )()
Static Protected Attributes inherited from DtComponentDescriptor
static DtComponentDescriptorFactory *	myFactory

Detailed Description

DtAggregateReleaseBombControllerDescriptor is a DtComponentDescriptor that has additional information needed for providing parameters to an AggregateReleaseBomb controller.

The Release Bomb Controller is the controller for several aggregate level simulation individual weapons, all of which need similar parameters and which use the AggregateReleaseBombController.

Constructor & Destructor Documentation

DtAggregateReleaseBombControllerDescriptor::DtAggregateReleaseBombControllerDescriptor	(	const DtString &	name,
		DtReaderWriterRegistry *	parentRegistry = 0
	)

constructor

DtAggregateReleaseBombControllerDescriptor::DtAggregateReleaseBombControllerDescriptor	(	const DtAggregateReleaseBombControllerDescriptor &	orig,
		DtReaderWriterRegistry *	parentRegistry = 0
	)

copy constructor

virtual DtAggregateReleaseBombControllerDescriptor::~DtAggregateReleaseBombControllerDescriptor ( )

virtual

destructor

DtAggregateReleaseBombControllerDescriptor::DtAggregateReleaseBombControllerDescriptor ( )

protected

default constructor

Member Function Documentation

DtAggregateReleaseBombControllerDescriptor& DtAggregateReleaseBombControllerDescriptor::operator=

(

const DtAggregateReleaseBombControllerDescriptor &

orig

)

assignment

virtual DtString DtAggregateReleaseBombControllerDescriptor::type ( ) const

virtual

Returns the type of component this descriptor describes.

Used to create the descriptor on read from an mtl file. Component descriptor type strings are defined in compDescTypes.h.

Reimplemented from DtScriptEnableControllerDescriptor.

Reimplemented in DtAggregateAntiAirControllerDescriptor.

virtual DtComponentDescriptor* DtAggregateReleaseBombControllerDescriptor::clone ( DtReaderWriterRegistry *  parentRegistry = 0 ) const

virtual

Reimplemented from DtScriptEnableControllerDescriptor.

Reimplemented in DtAggregateAntiAirControllerDescriptor.

virtual DtString DtAggregateReleaseBombControllerDescriptor::weaponName ( ) const

virtual

Accessor/mutator for myWeaponName.

virtual void DtAggregateReleaseBombControllerDescriptor::setWeaponName ( const DtString &  )

virtual

virtual double DtAggregateReleaseBombControllerDescriptor::range ( ) const

virtual

Accessor/mutator for myRange.

virtual void DtAggregateReleaseBombControllerDescriptor::setRange ( double  )

virtual

virtual double DtAggregateReleaseBombControllerDescriptor::radius ( ) const

virtual

Accessor/mutator for myRadius.

virtual void DtAggregateReleaseBombControllerDescriptor::setRadius ( double  )

virtual

virtual double DtAggregateReleaseBombControllerDescriptor::maxSheafRadius ( ) const

virtual

Accessor/mutator for myMaxSheafRadius.

virtual void DtAggregateReleaseBombControllerDescriptor::setMaxSheafRadius ( double  )

virtual

virtual double DtAggregateReleaseBombControllerDescriptor::hitFactor ( ) const

virtual

Accessor/mutator for myHitFactor.

virtual void DtAggregateReleaseBombControllerDescriptor::setHitFactor ( double  )

virtual

virtual int DtAggregateReleaseBombControllerDescriptor::strengthPerBomb ( ) const

virtual

Accessor/mutator for myStrengthPerBomb.

virtual void DtAggregateReleaseBombControllerDescriptor::setStrengthPerBomb ( int  )

virtual

virtual double DtAggregateReleaseBombControllerDescriptor::secondsPerBomb ( ) const

virtual

Accessor/mutator for mySecondsPerAttack.

virtual void DtAggregateReleaseBombControllerDescriptor::setSecondsPerBomb ( double  )

virtual

virtual int DtAggregateReleaseBombControllerDescriptor::bombsPerAttack ( ) const

virtual

Accessor/mutator for myBombsPerAttack.

virtual void DtAggregateReleaseBombControllerDescriptor::setBombsPerAttack ( int  )

virtual

virtual DtString DtAggregateReleaseBombControllerDescriptor::damageType ( ) const

virtual

Accessor/mutator for myDamageType.

virtual void DtAggregateReleaseBombControllerDescriptor::setDamageType ( const DtString &  )

virtual

virtual std::set<DtString> DtAggregateReleaseBombControllerDescriptor::availablePostures ( ) const

virtual

Accessor/mutator for myAvailablePosturesSet.

virtual void DtAggregateReleaseBombControllerDescriptor::setAvailablePostures ( const std::set< DtString > &  )

virtual

virtual DtString DtAggregateReleaseBombControllerDescriptor::availablePosturesString ( ) const

virtual

Accessor/mutator for myAvailablePostures.

virtual void DtAggregateReleaseBombControllerDescriptor::setAvailablePosturesString ( const DtString &  )

virtual

virtual const DtReal DtAggregateReleaseBombControllerDescriptor::jammingDefenseFactor ( ) const

virtual

Accessor/mutator for myJammingDefenseFactor.

virtual void DtAggregateReleaseBombControllerDescriptor::setJammingDefenseFactor ( const DtReal  factor )

virtual

virtual const bool DtAggregateReleaseBombControllerDescriptor::canBeRadarJammed ( ) const

virtual

Accessor/mutator for myCanBeRadarJammed.

virtual void DtAggregateReleaseBombControllerDescriptor::setCanBeRadarJammed ( const bool  jammable )

virtual

static DtComponentDescriptor* DtAggregateReleaseBombControllerDescriptor::creator ( )

static

Returns

Newly created instance of this class, with an empty DtReaderWriter name. Creation methods are registered with a DtComponentDescriptorFactory, so they can be created on demand as they are read in from a parameter database file.

Reimplemented from DtScriptEnableControllerDescriptor.

Reimplemented in DtAggregateAntiAirControllerDescriptor.

Member Data Documentation

DtRwString DtAggregateReleaseBombControllerDescriptor::myWeaponName

protected

Parameter Name: weapon-name
Parameter Description: The name of the type of bomb.

Parameter Default Value: "Bomb"

DtRwReal DtAggregateReleaseBombControllerDescriptor::myRange

protected

Parameter Name: range
Parameter Description: The range (in meters) from the target the unit must be to release a bomb.

Parameter Default Value: 1000

DtRwReal DtAggregateReleaseBombControllerDescriptor::myRadius

protected

Parameter Name: radius
Parameter Description: The radius (in meters) of the blast caused by the bomb.

Parameter Default Value: 0

DtRwReal DtAggregateReleaseBombControllerDescriptor::myMaxSheafRadius

protected

Parameter Name: max-sheaf-radius
Parameter Description: The maximum radius (in meters) of the pattern of bursts created by firing bombs-per-attack rounds with this weapon.

Aggregate units with multiple copies of this weapon will have a max sheaf size that is the sum of the individual max sheaf sizes.
Parameter Default Value: 0

DtRwReal DtAggregateReleaseBombControllerDescriptor::myHitFactor

protected

Parameter Name: hit-factor
Parameter Description: The effectiveness of the guidance capabilities of this bomb type.

Parameter Default Value: -1 (no hit factor)

DtRwInt DtAggregateReleaseBombControllerDescriptor::myStrengthPerBomb

protected

Parameter Name: strength-per-bomb
Parameter Description: The amount of damage a single bomb can cause.

Parameter Default Value: 1000

DtRwReal DtAggregateReleaseBombControllerDescriptor::mySecondsPerAttack

protected

Parameter Name: seconds-per-bomb
Parameter Description: The length of time it takes to drop a single bomb.

Parameter Default Value: 10

DtRwInt DtAggregateReleaseBombControllerDescriptor::myBombsPerAttack

protected

Parameter Name: bombs-per-attack
Parameter Description: The number of bombs that are released at once in an attack.

Parameter default: 1

DtRwString DtAggregateReleaseBombControllerDescriptor::myDamageType

protected

Parameter Name: damage-type
Parameter Description: The type of damage the bomb deals.

Parameter Default Value: "High-Explosive"

DtRwString DtAggregateReleaseBombControllerDescriptor::myAvailablePostures

protected

Parameter Name: available-postures
Parameter Description: The list of postures in which this task is available.

Parameter Default Value: "Travel, Hasty-Attack, Hasty-Defense, Deliberate-Attack, Deliberate-Defense"

std::set<DtString> DtAggregateReleaseBombControllerDescriptor::myAvailablePosturesSet

mutableprotected

The set is updated when myAvailablePostures is first accessed.

DtRwBoolean DtAggregateReleaseBombControllerDescriptor::myCanBeRadarJammed

protected

Parameter Name: can-be-radar-jammed
Parameter Description: True if this system uses radar and is therefore susceptible to radar jamming.

Parameter Default Value: False

DtRwReal DtAggregateReleaseBombControllerDescriptor::myJammingDefenseFactor

protected

Parameter Name: jamming-defense-factor
Parameter Description: A defensive strength against jamming.

Generally indicates the level of technology. Should be a number greater than 1.
Parameter Default Value: 100

---

The documentation for this class was generated from the following file:

• /exports/nfedora7-1/nightly/docs/vrforcesDevelopment.tot/include/vrfobjparam/aggregateReleaseBombControllerDescriptor.h