Public Member Functions |
| | DtSetStateAmmunitionPropertyDialog (makVrv::DtDe &de, QWidget *parent, const Qt::WindowFlags &flags=0) |
| virtual | ~DtSetStateAmmunitionPropertyDialog () |
| | DtSetStatePropertyDialog (makVrv::DtDe &de, QWidget *parent, const DtString &property, const Qt::WindowFlags &flags=0) |
| virtual | ~DtSetStatePropertyDialog () |
| | DtSetStatePropertiesDialog (makVrv::DtDe &de, QWidget *parent, const Qt::WindowFlags &flags=0) |
| virtual | ~DtSetStatePropertiesDialog () |
| virtual void | addProperty (const DtPropertyInterface *, bool merge=false) |
| | Adds a property to be able to be modified via the set command into the interface.
|
| | DtBaseTaskSetDialogInterface (makVrv::DtDe &de, QWidget *parent, const Qt::WindowFlags &flags=0) |
| virtual | ~DtBaseTaskSetDialogInterface () |
| virtual void | run (const std::vector< makVrv::DtSimEntry * > &) |
| | Calls setupGui and shows the dialog.
|
| virtual void | setOKEnabled (bool) |
| | Enables/disables OK button.
|
| virtual void | setCancelEnabled (bool) |
| | Sets whether or not the Cancel button is enabled.
|
| virtual bool | valid () const |
| | Override to return whether or not extension is valid.
|
| int | accepted () const |
| | 0 - Closed without pressing cancel or ok 1 - Closed by ok 2 - Closed by cancel
|
| virtual void | setAutoSizeOnShow (bool) |
| | Whether or not to place in center of main window on show or just let Qt do it. Default is true.
|
| virtual bool | autoSizeOnShow () const |
| virtual void | setDescription (const QString &desc) |
| | Adds descriptive text to the top of the dialog.
|
| virtual QString | description () const |
| | Returns the current descriptive text.
|
| | DtTaskSetDialogInterface (makVrv::DtDe &de, QWidget *parent, const Qt::WindowFlags &flags=0) |
| virtual | ~DtTaskSetDialogInterface () |
| virtual void | connectSignals (const std::vector< makVrv::DtSimEntry * > &) |
| | Setup signals to cancel dialog if all objects deleted that this dialog is representing.
|
| virtual void | setSendToRemoteController (bool b) |
| | Set to true to send the message immediately to the remote controller given the currently selected entities when the dialog was created.
|
| virtual bool | sendToRemoteController () const |
| virtual void | selectionChanged (const DtUUID &selection) |
| | Notify dialog of selection changes from attached dialogs.
|
| virtual void | sendSetRequest (std::vector< DtUUID > names, const DtSetDataRequest &) |
| | Sends signal to send out set.
|
| virtual bool | insertMapFocusHandler (DtMapFocusHandler *, int index=-1) |
| | If a dialog has manages map focus handlers, inserts this map focus handler into the chain.
|
| virtual void | initializeFromAction (DtVrfTaskSetAction *) |
| | Intializes contents from action as an action could have relevant properties assigned to it containing additional data.
|
| DtVrfTaskSetAction * | initializedAction () const |
| | The action this dialog was initialized for.
|
| virtual void | sendTaskRequest (std::vector< DtUUID > names, const DtSimTask &) |
| | Sends signal to send out task.
|
| virtual std::vector< DtUUID > | names () const |
| virtual void | setPartOfPlan (int b) |
| | 0 - Not part of plan dialog 1 - Part of plan dialog 2 - Part of command widget 3 - Part of embedded entity menu
|
| int | partOfPlan () const |
| virtual void | cancel () |
| | Sends out cancel signal.
|
| virtual QWidget * | widget () |
| | Returns the widget.
|
const std::vector
< makVrv::DtSimEntry * > & | connectedTo () const |
| virtual void | noObjectsSelected () |
| | No-op at this level.
|
 Public Member Functions inherited from makVrf::DtCommandDialogExtensionInterface |
| virtual | ~DtCommandDialogExtensionInterface () |
| virtual bool | initiallyBroadcast () const |
| | Whether or not to initially set to broadcast. Default is false.
|
| virtual bool | allowBroadcasting () const |
| | Whether or not to allow broadcasting. Default is true.
|
| virtual bool | hasUserEntry () const |
| | Returns true if there is user entry. Default is to assume there is.
|
| virtual QString | entitySelectionGroupBoxTitle () const |
| | If defined, title for the group box for entity selection on command widget.
|
| virtual void | onCancel ()=0 |
| virtual makVrv::DtUnicode | broadcastTitle () const |
Protected Member Functions |
| virtual void | setupGui (const std::vector< makVrv::DtSimEntry * > &data) |
| | If there is a single entry, find it's location and convert to local to set.
|
| virtual void | addAmmunitionItem (makVrv::DtSimEntry *) |
| | Adds all the ammunition for the given state view and controls to manipulate.
|
| virtual void | extractBaseValues (DtReaderWriter *, BaseValues &map) |
| | Extracts all the ammo and base values. Keeps around reader/writer items to make display items from.
|
| virtual void | updateTotalsForType (const std::string &) |
| | Updates the total based on base and current values.
|
| virtual void | modifyStateProperty () |
| | Set to modify the property that has just been changed.
|
| virtual void | sendRequest () |
| | Override to set into Ammunition-Categories.
|
| virtual void | setupStatement (const DtSimStatement *stmt) |
| | Take values from Ammunition-Categories and place into current values.
|
| virtual DtString | translationModule () const |
| | The module to use for translation of strings.
|
| virtual void | setupGuiWhenNoSelection () |
| | Sets up the GUI to handle the case where there is no sim object currently selected to be set.
|
| virtual void | setupGuiWhenSelectionInvalid () |
| | Sets up the GUI to handle the case where the selected sim object is not valid for this property.
|
| virtual QWidget * | contents (const std::vector< makVrv::DtSimEntry * > &data) |
| | Creates set dialog contents. Called from setupGui.
|
| virtual void | setupFrom (const std::vector< makVrv::DtSimEntry * > &s) |
| | Sets up dialog by asking logic to do it.
|
| virtual void | cleanupPropertyItem (PropertyItem &) const |
| virtual void | clearProperties () |
| virtual void | markAsReadOnly (PropertyItem &) |
| | Marks item and all children as read only. Hides check boxes and makes them unchecked.
|
| virtual bool | addPropertyItemForDataEntry (PropertyItem &, const DtReaderWriter *, const DtString &pathSoFar, int level, bool updateExistingValue=false) |
| | Adds in the property and all it's children.
|
| virtual int | addPropertyItemToDataSheet (PropertyItem &, const DtReaderWriter *, const DtString &pathSoFar, int level) |
| | Adds property item to data sheet except for data entry QLineEdit. adds only as a label. Returns the row added to.
|
| virtual DtRwProperties | modifiedProperties () const |
| virtual bool | modifiedProperties (const PropertyItem &, DtReaderWriter *rw, bool parentItList=false) const |
| virtual void | setupStateProperties (DtSetStateProperties *col) |
| virtual const DtReaderWriter * | baseValueFor (const DtString &pathSoFar) const |
| virtual bool | hasValue (const DtRwProperties &props, const DtString &val) const |
| | Returns true if the state properties have a non-zero top level value for the given item.
|
| virtual void | extract (std::vector< DtReaderWriter * > &allCounts, const DtString &extractionType, DtReaderWriter *curItem, const DtString &pathSoFar) const |
| | Returns all DtReaderWriter items that are extractionTypes items with the name set to the parent.
|
| virtual void | extractItemsFor (DtReaderWriter *, const DtString &extractionType, const DtString &title, DtRwProperties *container) const |
| | Sets up the property to only show the specified item with the item name that it is a count of.
|
| virtual void | addDataEntryIfModifiableValue (PropertyItem &item, const DtReaderWriter *rw, const DtString &pathSoFar, int level, bool updateExistingValue, int row) |
| virtual void | valueFromWidget (const PropertyItem &item, DtReaderWriter *rw) const |
| | Fills in the reader/writer value from the appropriate widget.
|
| virtual DtString | properties () const |
| | Properties used to check against to make sure this is an editable dialog.
|
| virtual bool | replace () const |
| | Determines whether or not a set replaces a property wholesale or simply look for matching items (in a list or map).
|
| virtual bool | valuesArePercentages (const std::vector< makVrv::DtSimEntry * > &data) const |
| | Returns whether or not the values should be displayed as percentages.
|
| virtual bool | sendValuesAsPercentages () const |
| | When sending the modification message, are the values contained a percentage of the current value? Default is myValuesArePercentages.
|
| virtual void | finishSizing () |
| virtual void | postGuiSetup (const std::vector< makVrv::DtSimEntry * > &data) |
| | Called after setupGui to set up other items in the gui (fill combo boxes, initial text edit, etc)
|
| virtual void | initializeItems (const std::vector< makVrv::DtSimEntry * > &data) |
| | Override for dialogs that need item initialization.
|
| virtual void | closeEvent (QCloseEvent *) |
| | Figure out if a cancelled signal needs to be sent.
|
| virtual void | hideButtons (bool) |
| | No buttons to hide.
|
| virtual bool | editStatement (const std::vector< makVrv::DtSimEntry * > &, const DtSimStatement *) |
| | Edits the current statement. Return true if the statement can be edited.
|
| virtual bool | wantsSelectionOfObjectInCommandMode () const |
| | Override to return false if, when this task is used as part of a simulation command, it does not want to allow to choose an object to apply the command to.
|
| virtual void | sendSetRequest (const DtSetDataRequest &) |
| virtual void | sendTaskRequest (const DtSimTask &) |
| virtual void | sendCommandRequest (const DtSimCommandObjectWrapper &) |
| | Sends signal to send out command.
|
| virtual QSize | canvasSize () |
| virtual void | onOK () |
| virtual void | slot_objectAboutToBeRemoved (makVrv::DtSimObjectEntry &) |
| virtual std::vector< std::string > | commandDialogFiltersFor (const std::vector< makVrv::DtSimEntry * > &data, const DtSimStatement *stmt, int &initialSelection) const |
| | If part of a command dialog the filters to use for the command dialog selection.
|
Sets up the set dialog to be able to change all state properties.
If multiple items are selected only the common items are going to be shown
