![]() |
VR-Forces 5.0.2 Developer's Guide
|
DtOsgLightPointManager registers LightPoint nodes so their TBO can be created and updated in a single place. Main access point for adding light points to the new system. It registers the light points which (if enabled) replaces the.

Public Member Functions | |
| DtOsgLightPointManager (DtDe &de) | |
| virtual void | registerInstancedLightPoints (LightPointVec &lightPoints, bool daylightControlled) |
| virtual void | findAndRegisterLightPoints (osg::Node *node, const std::string &groupName, bool daylightControlled, const DtIndirectFadeParameters &fadeParameters, bool combineLightPoints) |
| virtual void | registerLightPoints (const DtLightPointNodeAndXformVector &lightPoints, const std::string &groupName, bool daylightControlled, const DtIndirectFadeParameters &fadeParameters, bool combineLightPoints) |
| virtual LightPointNodeObsSet | aggregateLightPoints (const DtLightPointNodeAndXformVector &lightPoints, const std::string &groupName, bool daylightControlled, const DtIndirectFadeParameters &fadeParameters, bool combineLightPoints) |
| virtual DtLightPointNode * | createLightPointNode (osg::Node *nodeRef, bool daylightControlled) |
| virtual DtGlBuffer * | lightPointTypeBuffer () |
| virtual DtGlBuffer * | lightPointGroupBuffer () |
| virtual DtGlBuffer * | lightPointNodeBuffer (osg::Camera *camera) |
| virtual void | updateLightPointVertexBuffer (const std::vector< DtLightPointDrawable::LightPointVertexAttrib > &vertexAttribData, int minChanged, int maxChanged) |
| virtual DtGlBuffer * | lightPointVertexBufer () |
| virtual int | nodeId (DtLightPointNode *lpNode, int instanceId) |
| virtual void | slot_preTick () |
| virtual void | clearNodeBuffer (const osg::Camera *camera) |
| unsigned int | nodeBufferMaxNodeId (const osg::Camera *camera) |
| virtual void | setNodeBufferData (int nodeId, const osg::Camera *camera, const DtLightPointNodeDataLayout &nodeData) |
| virtual void | processImGui () |
| virtual DtLightPointDrawable * | masterLightPointDrawable () |
| virtual bool | debugLabelsEnabled () const |
| virtual bool | debugDirectionEnabled () const |
| virtual bool | softerLightPointsEnabled () const |
| virtual float | softenIntensity () const |
| virtual void | setShouldReplaceOsgSimLightPoints (bool enable) |
| virtual bool | shouldReplaceOsgSimLightPoints () |
| virtual void | freeNodeIds (std::vector< int > &nodeIds) |
| virtual void | releaseGLObjects (osg::State *state) const |
| virtual void | setInstanceReflectionMatrix (const osg::Camera *camera, const osg::Matrixf &reflectMat) |
| virtual const osg::Matrixf & | instanceReflectionMatrix (const osg::Camera *camera) |
| virtual bool | drawLightPoints () |
Public Member Functions inherited from makVrv::DtLightPointManager | |
| DtLightPointManager (DtDe &de) | |
| virtual bool | groupExists (const std::string &group) const |
| virtual DtColorValue | groupColor (const std::string &group) |
| virtual int | groupId (const std::string &group) |
| virtual int | lightPointMaxCode () |
| void | setGroupColor (const std::string &group, float colorR, float colorG, float colorB, float colorA) |
| virtual void | setGroupColor (const std::string &group, const DtColorValue &color) |
| virtual const GroupIdMap & | groupIdMap () |
Public Member Functions inherited from makVrv::DtVirtualBaseClass | |
| DtVirtualBaseClass () | |
| virtual | ~DtVirtualBaseClass () |
Static Public Member Functions | |
| static DtOsgLightPointManager & | instanceAsDtOsgLightPointManager (DtDe &de) |
Static Public Member Functions inherited from makVrv::DtLightPointManager | |
| static DtLightPointManager & | instance (DtDe &de) |
| static void | registerInstance (DtDe &de, DtLightPointManager *manager) |
| static const std::string & | theClassName () |
| static float | defaultLightPointRange () |
Public Attributes | |
| boost::signalslib::signal < void(LightPointNodeObsSet &)> | signal_lightPointsRegistered |
Protected Types | |
| typedef std::map< const osg::Camera *, std::vector < float > > | CameraVectorMap |
| typedef std::pair < DtLightPointNode *, int > | nodeIntPair |
| typedef std::map< nodeIntPair, int > | NodeIdMap |
| typedef std::map< std::string, GroupIdMap > | ParentGroupIdMap |
Protected Types inherited from makVrv::DtLightPointManager | |
| typedef std::vector< DtColorValue > | ColorVector |
Protected Member Functions | |
| virtual | ~DtOsgLightPointManager () |
| virtual void | slot_reloadShaders () |
| virtual void | setupShaders () |
| int | parseNodeGroupId (osg::Node *lightPointNode) |
| std::string | parseNodeGroupName (osg::Node *node) |
| virtual void | populateLightPointNode (osg::Node *nodeRef, DtLightPointNode *dtLpRef, bool daylightControlled, bool newNode) |
Protected Member Functions inherited from makVrv::DtLightPointManager | |
| virtual | ~DtLightPointManager () |
| void | local_setGroupColor (const std::string &group, const DtColorValue &color) |
Static Protected Member Functions | |
| static void | cleanupNodes (osg::Node *node) |
Private Member Functions | |
| DtOsgLightPointManager ()=delete | |
| DtOsgLightPointManager (const DtOsgLightPointManager &other)=delete | |
| DtOsgLightPointManager & | operator= (const DtOsgLightPointManager &other)=delete |
Additional Inherited Members | |
Public Types inherited from makVrv::DtLightPointManager | |
| typedef std::pair< std::string, int > | GroupIdPair |
| typedef std::map< std::string, int > | GroupIdMap |
Static Protected Attributes inherited from makVrv::DtLightPointManager | |
| static const std::string | theLightFilename |
| static const std::string | theLightTunningFilename |
| static const std::string | theLightDefaultValuesXmlFilename |
| static const std::string | theLightDefaultValuesCsvFilename |
|
protected |
|
protected |
|
protected |
|
protected |
| makVrv::DtOsgLightPointManager::DtOsgLightPointManager | ( | DtDe & | de | ) |
Light point manager contructor used by instance() call to setup the singleton instance.
|
privatedelete |
No default construction allowed.
|
privatedelete |
Copy Constructor not implemented – Copy Not Allowed.
|
protectedvirtual |
DTOR.
|
static |
get the DtOsgLightPointManger from the de instance registry
|
privatedelete |
Assignment Operator Not implemented – Assignment Not Allowed.
|
virtual |
Register a list of instanced light points daylightControlled is only used if the light points do not already have a type specified.
|
virtual |
traverse node and find all the light points and then pass them to registerLightPoints.
|
virtual |
Register a list of non instanced light points daylightControlled is only used if the light points do not already have a type specified.
|
virtual |
combine light points that can be combined into less nodes and convert them into DtLightPointNodes if needed as well.
|
virtual |
Create a DtLightPointNode based on an osgSim::LightPointNode also removes the osgSim::LightPointNode from the scenegraph Does nothing if shouldReplaceOsgSimLightPoints is set to false which is currently the default setting. daylightControlled is only used if the light points do not already have a type specified.
|
virtual |
Get and setup the light point type SSBO used for rendering the light points. this buffer contains the data from the DtLightPointTable reorganized into a tightly packed list of only the data that is needed by the shader.
|
virtual |
Get and setup the light point group SSBO. This buffer contains the intensity settings for all of the light point groups.
|
virtual |
Get and setup the light point node buffer SSBO. This contains all the model view matrices for all the light point nodes. there is a node buffer per camera because we need a view matrix for each camera.
|
virtual |
positions and information about their direction and blinking. Also contains ids for the type, node, and group
|
virtual |
get the ssbo for the light point vertex data. This contains the light point positions and information about their direction and blinking. Also contains ids for the type, node, and group
|
virtual |
get the node id for the specified node and instance
|
virtual |
handle the preTick signal. This clears the light point node buffer and updates the imGui
|
virtual |
Clear the node buffer for a particular camera.
get the number of node ids avilable for this camera's node buffer
|
virtual |
Set the light point node data for a particular node id (a node id is a one to one mapping to a node + instance) posScale is used to scale the position of the light point when model scaling is being used with instanced models radiusScale is used to scale the radius of the light point when model scaling is being used with any model.
|
virtual |
Update the imGui debug Gui and process any changes from the Gui.
|
virtual |
Get the master light point drawable that is used to draw all the light points.
|
virtual |
Check to see if debug labels are enabled. They are controlled by the imGui debug Gui.
|
virtual |
Check to see if debug direcion light points should be drawn.
|
virtual |
Check to see if soften light points is enabled.
|
virtual |
Get the intensity of the softening for the light points.
|
virtual |
Set if the light point manager should replace osgSim light point nodes with DtLightPointNodes this defaults to false for now and is controlled by an environment variable in the managers contructor.
|
virtual |
Get if the light point manager should replace osgSim light point nodes with DtLightPointNodes this defaults to false for now and is controlled by an environment variable in the managers contructor.
|
virtual |
When a DtLightPointNode is deleted it calls this in order to free up the nodeIds.
|
virtual |
|
virtual |
sets up the reflection pass matrix that converts from the main camera view space to the reflection camera view space.
|
virtual |
gets the reflection pass matrix that converts from the main camera view space to the reflection camera view space.
|
virtual |
controlled by IMgui and is used to stop drawing/culling light points entirely.
|
protectedvirtual |
Handle the reload shaders signal and reload the shaders for the managed light points.
|
protectedvirtual |
Reload the shaders and assign them to the drawables VP.
|
protected |
look at the light point node and it's parents to see if there is a group setup Currently supports light_group comments or runway wizard generated names
|
protected |
utility function for checking a node for the light_group comment.
|
protectedvirtual |
Add incoming light points to an existing light point node.
|
staticprotected |
Remove empty nodes, recursively upward in the graph. Some nodes are made empty by the light point aggregator, and are the only child of their parent, so can be removed, and so forth up into the graph.
| boost::signalslib::signal<void(LightPointNodeObsSet&)> makVrv::DtOsgLightPointManager::signal_lightPointsRegistered |
Emitted when the terrain patch has light points added.
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |