21 class DtArticulatedPartStateRepository;
39 namespace makVrfEvents
42 class DtSensorFieldOfViewControlEvent;
72 virtual const char*
type()
const;
78 static void setAimGimbalCallback(
DtSimMessage * msg,
void * usr);
84 static void setZoomSensorCallback(
DtSimMessage * msg,
void * usr);
92 static void setManualControlCallback(
DtSimMessage * msg,
void * usr);
98 static void setFieldOfViewColorCallback(
DtSimMessage * msg,
void * usr);
99 virtual void processSetFieldOfViewColor(
DtSimMessage* msg);
104 static void setLasingCallback(
DtSimMessage * msg,
void * usr);
110 static void laseTargetTaskCallback(
DtSimMessage *msg,
void * usrData);
111 virtual void processLaseTargetTaskMessage(
DtSimMessage *msg);
116 static void laseLocationTaskCallback(
DtSimMessage *msg,
void * usrData);
117 virtual void processLaseLocationTaskMessage(
DtSimMessage *msg);
133 virtual bool isUnderManualControl()
const;
136 virtual std::string
mode()
const;
139 virtual double orientation(
double& elevation)
const;
162 virtual bool targetPoint(
const DtTaitBryan& orientation,
DtVector& location)
const;
163 virtual DtVector localEyepoint()
const;
176 virtual void restoreDefaultAiming();
179 virtual void aimSensorAtPoint(
const DtVector& worldLocation);
182 virtual void trackObject(
const DtSimObject* objectToTrack);
186 virtual void aimSensorAtAngle(
double azimuth,
double elevation);
191 virtual void scanSensor();
196 virtual void searchAndTrackObject(
const DtSimObject* objectToTrack);
199 virtual void currentPositionAzimuthAndElevation(
DtVector&
offset,
double& az,
double& el)
const;
202 virtual void currentWorldLocationAndOrientation(
DtVector& location, DtTaitBryan& orientation)
const;
214 virtual bool findLocationOfSensorAiming(
const DtVector& sensorLocation,
215 const DtTaitBryan& orientation,
DtVector& aimingPoint)
const;
225 virtual double minAzimuth()
const;
228 virtual double maxAzimuth()
const;
231 virtual double minElevation()
const;
234 virtual double maxElevation()
const;
237 static DtRwColor randomFieldOfViewColor();
#define DT_DLL_vrfmodel
This file is used to determine how to build.
Definition: vrfmodelDefines.h:24
DtSensorGimbalControllerPSR * myProcessState
Definition: sensorGimbalController.h:256
Instances of DtStringOutputPort are output ports through which data producers can send a DtString obj...
Definition: stringIOPort.h:52
Definition: sensorFieldOfViewControlEvent.h:15
DtInputPortGroup * myGimbalLimitsPortGroup
Input Port Group Name: gimbal-limits Input Port Group Description: Allows the actuator to communicate...
Definition: sensorGimbalController.h:297
virtual bool postAddComponentsInit() override
Calls enableTaskTypes()
DtAnalogInputPort * myMaxAzimuthPort
Input Port Name: max-azimuth Input Port Description: The maximum azimuth at which the gimbal can aim...
Definition: sensorGimbalController.h:309
virtual const char * type() const override=0
Returns a string identifies the class type of component. Type values are defined in compTypes...
Instances of DtBooleanOutputPort are output ports through which data producers can send boolean data...
Definition: boolIOPort.h:45
bool myJoystickConnected
Definition: sensorGimbalController.h:268
This class provides a base class for all controllers that are capable of executing a DtSimTask...
Definition: singleTaskControllerComponent.h:22
virtual void bindLuaFunctions(lua_State *)=0
Override to bind lua functions.
The DtSimObjectReference is a shared pointer that can be used amongst many object for access to the u...
Definition: simObjectReference.h:26
DtAnalogOutputPort * myOrderedAzimuthPort
Output Port Name: ordered-azimuth Output Port Description: Azimuth at which to attempt to aim the gim...
Definition: sensorGimbalController.h:335
A readable, writable type whose name is the name of a component and that has a list of component name...
Definition: componentDescriptor.h:49
DtIntegerOutputPort * myElevationRotationRatePercentagePort
Output Port Name: elevation-rotation-rate-percentage Output Port Description: Percentage of maximum r...
Definition: sensorGimbalController.h:342
DtAnalogInputPort * myMaxElevationPort
Input Port Name: max-elevation Input Port Description: The maximum elevation at which the gimbal can ...
Definition: sensorGimbalController.h:321
Definition: readerWriterRegistry.h:39
Instances of DtSensorGimbalControllerDescriptor are used to specify the parameters for a DtSensorGimb...
Definition: sensorGimbalControllerDescriptor.h:18
Definition: bindableLuaComponent.h:53
DtAnalogInputPort * myMinElevationPort
Input Port Name: min-elevation Input Port Description: The minimum elevation at which the gimbal can ...
Definition: sensorGimbalController.h:315
DtIntegerOutputPort * myAzimuthRotationRatePercentagePort
Output Port Name: azimuth-rotation-rate-percentage Output Port Description: Percentage of maximum rot...
Definition: sensorGimbalController.h:349
DtStringOutputPort * myTargetObjectPort
Output Port Name: target-object Output Port Description: Name of the object the sensor is targeting...
Definition: sensorGimbalController.h:355
DtOrientationInputPort * myOrientationInputPort
Input Port Name: orientation Input Port Description: Specifies the orientation of the sensor relative...
Definition: sensorGimbalController.h:284
DtAnalogOutputPort * myZoomLevelPort
Output Port Name: zoom-level Output Port Description: Current zoom level. Output Port Range: 1...
Definition: sensorGimbalController.h:373
virtual void joystickDisconnected()=0
Called when joystick is disconnected for this controller.
DtEntityListInputPort * myTargetListPort
Input Port Name: target-list Input Port Description: Specifies the targets for the integrated laser...
Definition: sensorGimbalController.h:393
DtAnalogOutputPort * myOrderedElevationPort
Output Port Name: ordered-elevation Output Port Description: Elevation at which to attempt to aim the...
Definition: sensorGimbalController.h:328
Reader-Writer color specified by red, green, blue components.
Definition: rwColor.h:19
Instances of DtAnalogOutputPort are input ports through which data producers can send real numbers...
Definition: analogIOPort.h:45
DtAnalogInputPort * myMinAzimuthPort
Input Port Name: min-azimuth Input Port Description: The minimum azimuth at which the gimbal can aim...
Definition: sensorGimbalController.h:303
virtual void joystickConnected()=0
Called when joystick is connected for this controller.
Instances of DtVectorOutputPort are output ports through which data producers can send a DtVector...
Definition: vectorIOPort.h:52
DtPlatformLocalObjectFacade myPlatformLocalObjectFacade
Member to allow for access to platform specific data.
Definition: sensorGimbalController.h:397
File: simMsg.h.
Definition: simMessage.h:35
DtVector myWorldLocationForAimingPoint
World location and orientation for determining the aiming point when data was not initially available...
Definition: sensorGimbalController.h:264
virtual void tick()
This gives the thread of control to the component. The component is ticked once each simulation from ...
DtSensorGimbalControllerDescriptor * mySensorGimbalDescriptor
Definition: sensorGimbalController.h:254
DtVectorOutputPort * myTargetLocationPort
Output Port Name: target-location Output Port Description: Location the sensor is targeting...
Definition: sensorGimbalController.h:361
DtJoystickControllerInterface & operator=(const DtJoystickControllerInterface &orig)
assignment operator; not implemented.
DtTaitBryan myWorldOrientationForAimingPoint
World location and orientation for determining the aiming point when data was not initially available...
Definition: sensorGimbalController.h:265
virtual bool createPorts()
Called by init. Derived classes should override this method to create all their input/output ports an...
DtBooleanOutputPort * myLaserOnPort
Output Port Name: laser-on Output Port Description: Indicates whether the laser attached to this gimb...
Definition: sensorGimbalController.h:387
This class is responsible for controlling the aiming of a sensor on a gimbal. Uses Descriptor Type: D...
Definition: sensorGimbalController.h:48
DtInputPortGroup * mySensorOffsetInputPortGroup
Input Port Group Name: sensor-offset Input Port Group Description: Allows the actuator to communicate...
Definition: sensorGimbalController.h:276
virtual bool createPortGroups()
Called by init. Derived classes should override this method to create all their input/output port gro...
Central access point of all non-object-specific the services and managers that are available for use ...
Definition: simulationServices.h:94
The DtSimComponent class is the base class for the entire simulation model component hierarchy...
Definition: simComponent.h:91
Represents a single simulation object in the exercise. Object may be VRF simulation, or non-VRF simulated, and may be simulated by the local sim engine, or by a remote sim engine. Only public (external) state of the object is available. All data is read-only. All access to data of the object is thread safe within the simulation frame.
Definition: simObject.h:88
bool myDataNeededForAimingPoint
Whether the data is not yet loaded to find the aiming point.
Definition: sensorGimbalController.h:259
Instances of DtSensorFieldOfViewControlInter are used to store state data for SensorFieldOfViewContro...
Definition: sensorFieldOfViewControlInterDIS.h:51
DT_DLL_DEBUGDRAWRENDERER void init(makVrv::DtDe &de)
Work function for the plugin initialization.
virtual void clearTask() override
If component is currently tasked, calls clearPendingSubtasks(), sets the tasked flag to false...
The DtArticulatedPartStateRepository class is used to represent articulated parts for an entity...
Definition: articulatedPartStateRepository.h:40
const char int mode
Definition: ioapi.h:38
DtIntegerOutputPort * myTrackingModePort
Output Port Name: tracking-mode Output Port Description: Tracking mode of the sensor. Output Port Range: Values specified by DtSensorTrackingMode enum Output Group Parent: .
Definition: sensorGimbalController.h:367
virtual void calcAndSetPortValues(const DtString &functionGroup, const DtString &function, double value, bool repeat)=0
Override to set.
Instances of DtIntegerOutputPort are output ports through which data producers can send integer value...
Definition: integerIOPort.h:45
virtual void bindLuaGlobals(lua_State *)=0
Override to bind lua globals.
voidpf uLong offset
Definition: ioapi.h:42
Will manage basic functionality of a joystick controller. Implement pure virtual functions to respons...
Definition: joystickControllerInterface.h:23
DtSensorGimbalControllerPSR is a process state repository which holds state variables for the DtSenso...
Definition: sensorGimbalControllerPSR.h:25
DtVectorInputPort * myPositionInputPort
Input Port Name: position Input Port Description: Specifies the position of the sensor in body coordi...
Definition: sensorGimbalController.h:292
DtIntegerOutputPort * myFieldOfViewColorPort
Output Port Name: field-of-view-color Output Port Description: Color of the sensor's field of view...
Definition: sensorGimbalController.h:379
A locally simulated VRF object. Holds all internal and external data for the object, and provides access to both the current frame and next frame state data for the object. All current frame data is read-only, and next-frame data can be written to. No thread safety guarantees are made on this object during the simulation frame and it should only be accessed by the thread that is simulating the object.
Definition: localObject.h:86
A location3D is a point in space, i.e. a geocentric coordinate.
Definition: scriptGeometry.h:22