Inheritance diagram for DtSdcAttachablePdu:

Public Types
enum	DtVcObjectAttachment { DtVcObjectNoAttach = 0, DtVcObjectNoAttachNoAttach = 1, DtVcObjectAttachedToEntity = 2, DtVcObjectAttachedToObject = 3, DtVcObjectAttachedToEntityNoAttach = 4, DtVcObjectAttachedToObjectNoAttach = 5, DtVcObjectAttachedToNoAttachEntity = 6, DtVcObjectAttachedToNoAttachObject = 7, DtVcObjectAttachedToEntityObject = 8, DtVcObjectAttachedToObjectEntity = 9, DtVcObjectAttachedToEntityEntity = 10, DtVcObjectAttachedToObjectObject = 11 }
enum	DtVcDrawingStyle { DtVcStyleNoFlashing = 0x00, DtVcStyleFlashing = 0x04, DtVcDrawingStyleEntry = 0x04 }
Public Member Functions
virtual const DtVcObjectAttachment	attachmentType () const
	objects can be attach to 1 (text, sphere, cube, triangle, attribute group) or
virtual void	attachTo (const DtNetInt8 pos[2])
	2D placement of single position objects; uses a screen coordinate system of
virtual void	attachTo (const DtNetInt8 pos1[2], const DtNetInt8 pos2[2])
	2D placement of lines
virtual void	attachTo (const DtVector &pos)
	3D placement of single position objects
virtual void	attachTo (const DtNetU32 id)
virtual void	attachTo (const DtGlobalObjectDesignator &id)
virtual void	attachTo (const DtNetU32 id1, const DtNetU32 id2)
	3D placement of two position objects
virtual void	attachTo (const DtGlobalObjectDesignator &id1, const DtGlobalObjectDesignator &id2)
virtual void	attachTo (const DtVector &pos1, const DtVector &pos2)
virtual void	attachTo (const DtGlobalObjectDesignator &id1, const DtNetU32 id2)
virtual void	attachTo (const DtNetU32 id1, const DtGlobalObjectDesignator &id2)
virtual void	attachTo (const DtGlobalObjectDesignator &id, const DtVector &pos)
virtual void	attachTo (const DtVector &pos, const DtGlobalObjectDesignator &id)
virtual void	attachTo (const DtNetU32 id, const DtVector &pos)
virtual void	attachTo (const DtVector &pos, const DtNetU32 id)
virtual void	setRelativeLocation (DtNetU8 percentage, int index=0)
	relative location along the parent object if there is not parent object or the parent object is puntual this value is discarded The value is a percentage (0 - 100) messure from start point to end point Because a line or cylinder has two attachments, each of which could be another line or cylinder, the interface needs to support 2 relative locations.
virtual const DtNetU8	relativeLocation (int index=0) const
virtual void	setOffset (const DtVector &offsetVector)
	offset from final position.
virtual DtVector	offset () const
virtual const DtGlobalObjectDesignator	attachEntityId (int index) const
virtual const DtNetU32	attachObjectId (int index) const
virtual DtVector	position (int index) const
virtual void	setColor (DtNetU8 color[4])
virtual const DtNetU8 *	color () const
virtual void	setFlashing (bool onOff)
virtual const bool	flashing () const
virtual void	setFromString (const char *)
virtual const char *	string () const
virtual void	printData () const
Static Public Member Functions
static const char *	typeString (DtVcObjectAttachment param)
Protected Member Functions
virtual void	setAttachmentType (DtVcObjectAttachment attachmentType)

Member Enumeration Documentation

enum DtSdcAttachablePdu::DtVcObjectAttachment

Enumerator:

DtVcObjectNoAttach
DtVcObjectNoAttachNoAttach	Attach to single position (2D or 3D)
DtVcObjectAttachedToEntity	Attach ends of a line to specified positions.
DtVcObjectAttachedToObject	Attach to a single entity (3D only? ) test 2D text.
DtVcObjectAttachedToEntityNoAttach	Attach text to a (3d) DrawControl Object.
DtVcObjectAttachedToObjectNoAttach	Attach one end of a line to an entity and the other end to a specified position.
DtVcObjectAttachedToNoAttachEntity	Attach one end of a line to a (3d) DrawControl Object and the other end to a specified position.
DtVcObjectAttachedToNoAttachObject	Attach one end of a line to a specified position and the other end to an entity.
DtVcObjectAttachedToEntityObject	Attach one end of a line to a specified position and the other end to a Draw Control Object.
DtVcObjectAttachedToObjectEntity	Attach one end of a line to an entity and the other end to a Draw Control Object.
DtVcObjectAttachedToEntityEntity	Attach one end of a line to a Draw Control Object and the other end to an entity.
DtVcObjectAttachedToObjectObject	Attach ends of a line to specified entities.

enum DtSdcAttachablePdu::DtVcDrawingStyle

Enumerator:

DtVcStyleNoFlashing
DtVcStyleFlashing
DtVcDrawingStyleEntry

Member Function Documentation

virtual const DtVcObjectAttachment DtSdcAttachablePdu::attachmentType ( ) const [virtual]

objects can be attach to 1 (text, sphere, cube, triangle, attribute group) or

virtual void DtSdcAttachablePdu::attachTo ( const DtNetInt8 pos[2] ) [virtual]

2D placement of single position objects; uses a screen coordinate system of

virtual void DtSdcAttachablePdu::attachTo	(	const DtNetInt8	pos1[2],
		const DtNetInt8	pos2[2]
	)		`[virtual]`

2D placement of lines

virtual void DtSdcAttachablePdu::attachTo ( const DtVector & pos ) [virtual]

3D placement of single position objects

virtual void DtSdcAttachablePdu::attachTo ( const DtNetU32 id ) [virtual]

virtual void DtSdcAttachablePdu::attachTo ( const DtGlobalObjectDesignator & id ) [virtual]

virtual void DtSdcAttachablePdu::attachTo	(	const DtNetU32	id1,
		const DtNetU32	id2
	)		`[virtual]`

3D placement of two position objects

virtual void DtSdcAttachablePdu::attachTo	(	const DtGlobalObjectDesignator &	id1,
		const DtGlobalObjectDesignator &	id2
	)		`[virtual]`

virtual void DtSdcAttachablePdu::attachTo	(	const DtVector &	pos1,
		const DtVector &	pos2
	)		`[virtual]`

virtual void DtSdcAttachablePdu::attachTo	(	const DtGlobalObjectDesignator &	id1,
		const DtNetU32	id2
	)		`[virtual]`

virtual void DtSdcAttachablePdu::attachTo	(	const DtNetU32	id1,
		const DtGlobalObjectDesignator &	id2
	)		`[virtual]`

virtual void DtSdcAttachablePdu::attachTo	(	const DtGlobalObjectDesignator &	id,
		const DtVector &	pos
	)		`[virtual]`

virtual void DtSdcAttachablePdu::attachTo	(	const DtVector &	pos,
		const DtGlobalObjectDesignator &	id
	)		`[virtual]`

virtual void DtSdcAttachablePdu::attachTo	(	const DtNetU32	id,
		const DtVector &	pos
	)		`[virtual]`

virtual void DtSdcAttachablePdu::attachTo	(	const DtVector &	pos,
		const DtNetU32	id
	)		`[virtual]`

virtual void DtSdcAttachablePdu::setRelativeLocation	(	DtNetU8	percentage,
		int	index = `0`
	)		`[virtual]`

relative location along the parent object if there is not parent object or the parent object is puntual this value is discarded The value is a percentage (0 - 100) messure from start point to end point Because a line or cylinder has two attachments, each of which could be another line or cylinder, the interface needs to support 2 relative locations.

Note that Version 0 did NOT. Only one percentage could be specified, and it was used for both attachments when that case arose. The default values are left for backwards compatibility

virtual const DtNetU8 DtSdcAttachablePdu::relativeLocation ( int index = 0 ) const [virtual]

virtual void DtSdcAttachablePdu::setOffset ( const DtVector & offsetVector ) [virtual]

offset from final position.

virtual DtVector DtSdcAttachablePdu::offset ( ) const [virtual]

virtual const DtGlobalObjectDesignator DtSdcAttachablePdu::attachEntityId ( int index ) const [virtual]

virtual const DtNetU32 DtSdcAttachablePdu::attachObjectId ( int index ) const [virtual]

virtual DtVector DtSdcAttachablePdu::position ( int index ) const [virtual]

virtual void DtSdcAttachablePdu::setColor ( DtNetU8 color[4] ) [virtual]

Reimplemented in DtSdcLinePdu.

virtual const DtNetU8* DtSdcAttachablePdu::color ( ) const [virtual]

Reimplemented in DtSdcLinePdu.

virtual void DtSdcAttachablePdu::setFlashing ( bool onOff ) [virtual]

virtual const bool DtSdcAttachablePdu::flashing ( ) const [virtual]

virtual void DtSdcAttachablePdu::setFromString ( const char * ) [virtual]

Reimplemented from DtStealthControlPdu.

Reimplemented in DtSdcAreaPduBase, DtSdcTrianglePduBase, DtSdcTextPduBase, DtSdcPolyObjectPduBase, and DtSdcAttributePduBase.

virtual const char* DtSdcAttachablePdu::string ( ) const [virtual]

Reimplemented from DtStealthControlPdu.

Reimplemented in DtSdcAreaPduBase, DtSdcTrianglePduBase, DtSdcTextPduBase, DtSdcPolyObjectPduBase, and DtSdcAttributePduBase.

virtual void DtSdcAttachablePdu::printData ( ) const [virtual]

Reimplemented from DtStealthDrawControlPdu.

Reimplemented in DtSdcAreaPduBase, DtSdcTrianglePduBase, DtSdcTextPduBase, DtSdcPolyObjectPduBase, DtSdcLinePdu, and DtSdcAttributePduBase.

static const char* DtSdcAttachablePdu::typeString ( DtVcObjectAttachment param ) [static]

virtual void DtSdcAttachablePdu::setAttachmentType ( DtVcObjectAttachment attachmentType ) [protected, virtual]

The documentation for this class was generated from the following file:

include/vrvVrl/legacyStealthControl.h

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Member Enumeration Documentation

Member Function Documentation