 |
VR-Forces 4.1 Class Documentation
|
|
VR-Forces 4.1 Class Documentation
|
DtFixedWingDefaultController is a controller used to direct a fixed wing entity to loiter when it is in the air and not otherwise tasked. More...
Public Member Functions | |
| DtFixedWingDefaultController (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString&,DtVrfObject*,DtSimManager*, | |
| virtual | ~DtFixedWingDefaultController () |
| destructor | |
| virtual bool | init () |
| Initialization - Calls base init() and creates and initializes our waypoint. | |
| virtual void | tick () |
| Calculate new control values. | |
| virtual DtString | type () const |
| Returns a string identifies the class type of component. | |
| virtual double | radius () const |
| Sets/gets radius of circle in process state repository (myProcessState, a DtFixedWingFlightPSR). | |
| virtual void | setRadius (double radius) |
| virtual bool | clockwise () const |
| Sets/gets clockwise flag in process state repository (myProcessState, a DtFixedWingFlightPSR). | |
| virtual void | setClockwise (bool clockwise) |
| virtual DtVrfObject * | waypoint () const |
| OBSOLETE - returns 0. | |
| virtual bool | postAddComponentsInit () |
| Override to initialize loiter clockwise flag and loiter radius parameters in process state repository with values from component descriptor. | |
| virtual void | processOrbitTask (DtSimMessage *msg) |
| If the plane is not on the ground, this function will pull out the location, radius and direction of the orbit task and copy them into the process state repository. | |
 Public Member Functions inherited from DtFixedWingPilotController | |
| DtFixedWingPilotController (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString&,DtVrfObject*,DtSimManager*, | |
| virtual | ~DtFixedWingPilotController () |
| destructor | |
| virtual void | clearTask () |
| Overridden to deactivate the port group when this controller completes a task. | |
| virtual void | taxiTo (const DtVector &destination, double speed) |
| The following functions assume that the FWE is on the GROUND. | |
| virtual void | taxi (double speed, double turnRate) |
| Call this to taxi at a given speed and turn rate. | |
| virtual double | calculateSteering (double turnAngle) const |
| Calculates the pedal port value for the given turn angle. | |
| virtual double | approximateThrottle (double speed) |
| Calculates the throttle port value for the given speed using: throttle = (slope/maxSlope + ((desiredSpeed/maxSpeed)) | |
| virtual double | calculateCurrentBrakingDistance () const |
| Returns the braking distance using the current speed and breaking ability to determine how long it would take to brake. | |
| virtual void | flyTo (const DtVector &destination, double speed) |
| The following functions assume that the FWE is in the AIR. | |
| virtual void | flyToDirect (const DtVector &destination, double speed) |
| Call this to fly to a specified 3D point at the given speed. | |
| virtual void | fly (double speed, double turnRate, double climbRate) |
| Call this to fly at a given speed, turn rate and climb rate. | |
| virtual void | flyFixedPitch (double speed, double turnRate, double desiredPitch) |
| Call this to fly at a given speed, turn rate and pitch. | |
| virtual void | circle (const DtVector ¢er, double radius, double speed, double altitude, bool clockwise=true) |
| Call this to fly in a circle. | |
| virtual double | calcControlForRoll (double rollRate) |
| Calculates and returns the stickY value needed to achieve the desired roll rate. | |
| virtual double | calcControlForThrottle (double speed, bool &deployFlaps) |
| Calculates a throttle value based on the entity’s current speed, desired speed, and current acceleration. | |
| virtual void | calcControlForTurnAndClimb (double turnRate, double climbRate, double &stickX, double &pedal) |
| The calcControlForTurnAndClimb() method determines the appropriate pitch angle to use to achieve the desired climb rate, then calls calccontrolForTurnAndPitch(). | |
| virtual void | calcControlForTurnAndPitch (double turnRate, double desiredPitch, double &stickX, double &pedal) |
| The calcControlForTurnAndClimb() method determines complementary stickX and pedal values to achieve a desired turn rate and climb rate. | |
| virtual double | calculateClimbRate (double altitude, double climbTime) const |
| Calculates a climb rate to achieve the specified altitude in the climbTime specified. | |
| virtual double | calculateTurnRate (double turnAngle) const |
| Determines the turn rate that will be used to change heading. | |
| virtual double | calculateRollAngle (double turnRate, double speed) const |
| Calculates a roll angle for a turn based on the turn rate desired and the entity’s current speed. | |
| virtual double | calculateRollRate (double rollAngle) |
| Calculates a desired rate of roll based on the current roll and the desired roll angle. | |
| virtual void | calculateNormalizedBodyVelocity () |
| Put current velocity into body coordinates. | |
| virtual void | calculateLocalAngularVelocity () |
| The calculateLocalAngularVelocity() function calculates the entity’s current rate of heading change and stores the value in myProcessState's myLocalAngularVelocity member. | |
| virtual void | calculateSpeedRatioSquared () |
| Calculate the square of our current speed divided by our max speed. | |
| virtual void | initializeControllerForTick () |
| The initializeControllerForTick() function is called to recompute the entity’s normalized body velocity, local angular velocity, and speed ratio squared. | |
| virtual bool | createFixedWingControlPortGroup () |
| These are called in init to create the ports used to communicate with the actuator. | |
| virtual bool | createThrottlePort () |
| virtual bool | createStickPort () |
| virtual bool | createPedalPort () |
| virtual bool | createBrakePort () |
| virtual bool | createFlapsDeployedPort () |
| This is not currently used. | |
| virtual DtConstrainedAnalogOutputPort * | throttlePort () |
| These provide access to the ports. | |
| virtual DtConstrainedDualAxisAnalogOutputPort * | stickPort () |
| virtual DtConstrainedAnalogOutputPort * | pedalPort () |
| virtual DtConstrainedAnalogOutputPort * | brakePort () |
| virtual DtBooleanOutputPort * | flapsDeployedPort () |
| virtual void | setMaxThrustAcceleration (double maxThrustAcceleration) |
| These are used to set values in the process state repository. | |
| virtual void | setTakeOffDir (const DtVector &takeOffDir) |
| The direction vector for take off. | |
| virtual const DtVector & | takeOffDir () const |
| virtual DtReal | maxTurningGs () const |
| Parameter value from descriptor. | |
| virtual DtReal | maxTurnRateCutoffAngle () const |
| Parameter value from descriptor. | |
| virtual DtReal | maxTaxiingTurnSpeed () const |
| Parameter value from descriptor. | |
| virtual DtReal | taxiingNearDistance () const |
| Parameter value from descriptor. | |
| virtual DtReal | taxiingAtDistance () const |
| Parameter value from descriptor. | |
| virtual DtReal | taxiingApproachSpeed () const |
| Parameter value from descriptor. | |
| virtual DtReal | maxPitchAngle () const |
| Parameter value from descriptor. | |
| virtual DtReal | timeToTargetAltitude () const |
| Parameter value from descriptor. | |
| Public Member Functions inherited from DtSingleTaskControllerComponent | |
| DtSingleTaskControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *compDesc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString& name, | |
| virtual | ~DtSingleTaskControllerComponent () |
| destructor | |
| virtual void | postTick () |
| Override to check if we're tasked and we want to give up (only performs the check if we're in play mode (dT() > 0)). | |
| virtual bool | beginProcessingTask (const DtTaskMessage &task, DtSimTaskStatePtr taskState) |
| Called by the task manager when this controller should start executing the specified task. | |
| virtual void | taskNotify (const DtSimTask &task) |
| This is called to let us know when some other component receives a task In the case of this component, we don't care what the task actually is. | |
| virtual void | taskComplete (bool success=true) |
| If we are currently tasked, this will cause us to notify the entity that we're done and delete the task. | |
| virtual int | sendSubtask (DtSimTask &task) |
| Sends subtask to ourself. | |
| virtual void | clearSubtask (int subtaskId) |
| Clears subtask with the given subtaskId (subtaskId is returned sendSubtask()). | |
| virtual void | addPendingSubtaskId (int subtaskId) |
| Adds given subtask Id to list of pending subtasks. | |
| virtual bool | findPendingSubtaskId (int subtaskId) |
| Checks to see if given subtaskId exists in our list of pending subtasks. | |
| virtual void | removePendingSubtaskId (int subtaskId) |
| Removes pending subtask from list of subtasks for this component. | |
| virtual void | removeAllPendingSubtaskIds () |
| Clear all pending subtasks from our list of subtasks. | |
| virtual std::vector< int > | currentPendingSubstaskIds () const |
| Returns the list of all currently pending subtask ids for this controller. | |
| virtual void | clearCurrentTaskMessage () |
| Returns the current subtask with the specified id. | |
| virtual DtTaskMessage * | currentTaskMessage () const |
| Get a pointer to the message that was used to task this entity. | |
| virtual DtSimTaskStatePtr | currentTaskState () const |
| virtual void | giveUpTask () |
| Called when controller is tasked and decideToGiveUp() returns true. | |
| virtual bool | taskActive (int taskId) const |
| | |
| virtual bool | clearTopLevelTasks () |
| If this controller has any top level tasks (not subtasks), they are cleared. | |
| virtual void | clearConflictingTopLevelTasks (const DtSimTaskMessageType &conflictType) |
| Clears any top level tasks on this controller that conflict with the conflict task type. | |
| virtual void | clearTasksByType (const DtSimTaskMessageType &taskType) |
| Clears any tasks of the specified type running in this controller. | |
| virtual void | clearTaskById (int taskId) |
| Clears any task of the specified ID running in this controller. | |
| virtual std::list < DtTaskMessage * > | currentTaskMessages () const |
| | |
| virtual DtTaskWithTaskStateListPtr | topLevelTasks () const |
| | |
| Public Member Functions inherited from DtTaskControllerComponent | |
| DtTaskControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *compDesc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString& name, | |
| virtual | ~DtTaskControllerComponent () |
| destructor | |
| virtual bool | showCurrentTaskInGui () const |
| virtual void | setRadio (DtSimBaseRadio *radio) |
| Calls registerTaskMsgCallbacks. | |
| virtual void | addTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtTaskMessageCallbackFcn fcn, void *usr) |
| Adds a new function for processing the specified task type. | |
| virtual void | addTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtMessageCallbackFcn fcn, void *usr) |
| Deprecated form of addTaskProcessorCallback. | |
| virtual void | removeTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtMessageCallbackFcn fcn, void *usr) |
| Undoes anything done by addTaskProcessorCallback(). | |
| virtual void | removeTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtTaskMessageCallbackFcn fcn, void *usr) |
| Deprecated form of removeTaskProcessorCallback. | |
| virtual void | enable () |
| Overridden to call registerTaskMsgCallbacks(). | |
| virtual void | disable () |
| Overridden to 1) remove any task message callbacks registered by this controller 2) call clear task. | |
| virtual void | sendTaskCanceled (DtTaskMessage *taskMsg) |
| Sends the task canceled report for the specified message. | |
| virtual void | setTasked (bool tasked) |
| The current tasked state of this controller. | |
| virtual bool | tasked () const |
| The current tasked state of this controller. | |
| Public Member Functions inherited from DtControllerComponent | |
| DtControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString& name, | |
| virtual | ~DtControllerComponent () |
| destructor | |
| virtual DtSimBaseRadio * | radio () |
| The radio this component is listening to. | |
| Public Member Functions inherited from DtSimComponent | |
| DtSimComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| virtual | ~DtSimComponent () |
| destructor | |
| void | setParentSystem (DtComponentSystem *system) |
| Sets the parent system of this component. | |
| virtual void | preFirstTickInit () |
| This function can be overridden to initialize a component before it is ticked for the first time. | |
| virtual void | timedTick () |
| This version of tick checks to see if the time to tick has arrived. | |
| virtual void | setMinTickPeriod (double minTickPeriod) |
| specifies a minimum tick period (which can also be thought of as | |
| virtual double | minTickPeriod () const |
| access the minimum tick period | |
| virtual void | setMinTickPeriodVariance (double minTickPeriodVariance) |
| set the variance in the minimum tick time | |
| virtual double | minTickPeriodVariance () const |
| access the variance in the minimum tick period | |
| virtual void | setNextTickTime (double nextTickTime) |
| The next tick time is normally calculated internally. | |
| virtual double | nextTickTime () const |
| access the next tick time | |
| virtual double | calculateNextTickTime () const |
| The next tick time is equal to mySimManager->exerciseClock()-> approximateElapsedRealTime() + myMinTickPeriod + a random # between -myMinTickPeriodVariance/2. | |
| virtual double | calculateFirstTickTime () const |
| Returns the first time value that the component should tick at. | |
| virtual void | setEntity (DtVrfObject *entity) |
| The entity's state repository is the place that actuator components make updates and other components look to see our current state. | |
| virtual DtSimComponent * | nextComponent () |
| List management functions. | |
| virtual DtSimComponent * | prevComponent () |
| virtual void | setListItem (DtListItem *item) |
| Used by DtComponentList. | |
| virtual DtListItem * | listItem () |
| virtual void | putData (FILE *fp, int indentLevel=0) |
| putData writes our type, which is provided by the virtual type accessor of the deriving class. | |
| virtual DtlObjPtr | getData (DtlObjPtr args, const DtFilename &searchPath, const DtVariableBindingsList &variableBindings) |
| getData is just used to get us past the type in the data stream, since it's not actual stored. | |
| virtual void | addInputPort (DtInputPort *port) |
| Adds this input port to the components input port list so that other components can look it up and attach to it. | |
| virtual void | removeInputPort (DtInputPort *port) |
| virtual DtInputPort * | lookupInputPort (const DtString &portName) |
| Returns a pointer to the input port registered on this component with the specified name. | |
| virtual DtList | inputPortList () const |
| Returns the list of DtInputPorts registered on this component. | |
| virtual void | addOutputPort (DtOutputPort *port) |
| Adds this output port to the components output port list so that other components can look it up and attach to it. | |
| virtual void | removeOutputPort (DtOutputPort *port) |
| virtual DtOutputPort * | lookupOutputPort (const DtString &portName) |
| Returns a pointer to the output port registered on this component with the specified name. | |
| virtual DtList | outputPortList () const |
| Returns the list of DtOutputPorts registered on this component. | |
| virtual void | addInputPortGroup (DtInputPortGroup *group) |
| Adds this input port to the components input port list so that other components can look it up and attach to it. | |
| virtual void | removeInputPortGroup (DtInputPortGroup *group) |
| virtual DtInputPortGroup * | lookupInputPortGroup (const DtString &groupName) |
| Returns a pointer the input port group registered on this component with the specified name. | |
| virtual DtList | inputPortGroupList () const |
| Returns the list of DtInputPortGroups registered on this component. | |
| virtual void | addOutputPortGroup (DtOutputPortGroup *group) |
| Adds this output port group to the components output port group list so that other components can look it up and attach to it. | |
| virtual void | removeOutputPortGroup (DtOutputPortGroup *group) |
| virtual DtOutputPortGroup * | lookupOutputPortGroup (const DtString &groupName) |
| Returns a pointer the output port group registered on this component with the specified name. | |
| virtual DtList | outputPortGroupList () const |
| Returns the list of DtOutputPortGroups registered on this component. | |
| virtual int | priority () const |
| Return the current connection priority for this component. | |
| virtual void | setPriority (int priority) |
| Sets a new connection priority for this component, and changes all current outgoing connections from this component to the new value. | |
| double | dT () const |
| This is the delta-t for this component, which may or may not be the same as the exerciseClock dT. | |
| virtual void | setDT (double deltaT) |
| Note that while dT is calculated internally, this makes it possible to 'lie' to the component about dT if necessary. | |
| virtual void | setComponentDescriptor (DtComponentDescriptor *componentDescriptor) |
| The component descriptor specified in the order of battle file or parameter file that was used to create this component. | |
| virtual const DtComponentDescriptor * | componentDescriptor () const |
| virtual bool | tickWhileDestroyed () const |
| If the component returns true here, it will be ticked regardless of the destroyed state of the host entity. | |
| DtVrfProcessStateRepositoryManager * | psrManager () |
| virtual DtString | componentFullName () const |
| virtual bool | isEnabled () |
| Is this component enabled or not. | |
| virtual void | setIsEnabled (bool yesNo) |
| Is this component enabled or not. | |
| virtual DtOutputStream & | objectConsoleDebug () const |
| virtual DtOutputStream & | objectConsoleVerbose () const |
| virtual DtOutputStream & | objectConsoleInfo () const |
| virtual DtOutputStream & | objectConsoleWarn () const |
| virtual DtOutputStream & | objectConsoleError () const |
| virtual DtSimResourceManager & | resourceManager () |
| virtual const DtSimResourceManager & | resourceManager () const |
| Public Member Functions inherited from DtReaderWriter | |
| DtReaderWriter () | |
| default constructor | |
| DtReaderWriter (const DtString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false) | |
| real constructor Setting the readonly flag prevents object from writing itself to the stream. | |
| DtReaderWriter (const DtSymbolString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false) | |
| DtReaderWriter (const DtString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL) | |
| copy constructor | |
| DtReaderWriter (const DtSymbolString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL) | |
| const DtReaderWriter & | operator= (const DtReaderWriter &orig) |
| assignment operator | |
| virtual | ~DtReaderWriter () |
| destructor | |
| virtual void | putSelf (FILE *fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename()) |
| Top level call to write itself to file. | |
| virtual void | getSelf (DtlObjPtr args, const DtFilename &searchPath=DtFilename::nullFilename(), const DtVariableBindingsList &variableBindings=nullVariableReference()) |
| Top level to read itself from an input stream. | |
| virtual void | writeSelf (FILE *fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename()) |
| Called from putSelf, calls myRegistry.putSelf which in turn calls putSelf on each reader/writer in the registry. | |
| virtual DtSymbolString | name () const |
| Accessor for name of this readable/writable object. | |
| virtual void | addAlias (const DtSymbolString &alias) |
| Add an alias as an alternative name for this object. | |
| virtual bool | hasAlias (const DtSymbolString &alias) |
| virtual const aliasContainer & | aliases () const |
| virtual void | setReadonly (bool flag) |
| Set read-only flag. | |
| virtual bool | isReadonly () const |
| virtual bool | variableIsBound () const |
| virtual void | unbindVariable () |
| Sets the myVariableIsBound flag to false. | |
| virtual void | setName (const DtString &) |
| Set the name of the object. | |
| virtual const char * | readerWriterType () const |
| Used to supply a string type that this reader writer type is. | |
| virtual DtString | prettyPrint () const |
| Routine to return a human readable form of the reader/writer variable. | |
| virtual void | bindVariables (DtVariableBindingsList variableBindings) |
| Runs a variable binding pass on this reader writer and any of its children. | |
| virtual std::list < DtVariableNameType > | unboundVariables () const |
| bool | invalid () const |
| virtual bool | hasChild (const DtReaderWriter *p) const |
| Returns true if this variable has a child p in it's chain. | |
| virtual void | setValueSpecified (bool specified, bool recurse=false) |
| The specified flags are used for optional values. | |
| virtual bool | valueSpecified () const |
| The specified flags are used for optional values. | |
| virtual bool | isVariableReference () const |
| Specifies whether or not this reader writer is really a variable that is specified elsewhere. | |
| virtual void | setIsVariableReference (bool value) |
| virtual DtSymbolString | variableName () const |
| The variable name, if this object is a variable reference. | |
| virtual void | setVariableName (const DtSymbolString variableName) |
| The variable name, if this object is a variable reference. | |
| const DtReaderWriterRegistry & | registry () const |
| Collection of child DtReaderWriter nodes owned by this object. | |
| DtReaderWriterRegistry & | registry () |
| Collection of child DtReaderWriter nodes owned by this object. | |
Static Public Member Functions | |
| static DtSimComponent * | creator (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) |
| (const DtString&,DtVrfObject*,DtSimManager*, | |
| static void | orbitTaskCallback (DtSimMessage *msg, void *usr) |
| Calls processOrbitTask. | |
Protected Member Functions | |
| virtual void | registerTaskMsgCallbacks () |
| Overridden to register interest in orbit tasks. | |
| Protected Member Functions inherited from DtFixedWingPilotController | |
| virtual bool | createPorts () |
| Overridden to create the fixed wing ports. | |
| virtual bool | createPortGroups () |
| Overridden to create myFixedWingControlPortGroup. | |
| virtual void | lookupAndCacheProcessSR () |
| This function looks up a process state repository in the process state repository manager by name, and caches a pointer to it in myProcessState. | |
| virtual bool | decideToGiveUpTask () const |
| If the entity is attached and the target of the current task is not, give up on the task. | |
| DtFixedWingPilotController () | |
| default constructor; not implemented | |
| DtFixedWingPilotController (const DtFixedWingPilotController &orig) | |
| copy constructor; not implemented | |
| const DtFixedWingPilotController & | operator= (const DtFixedWingPilotController &orig) |
| assignment operator; not implemented | |
| Protected Member Functions inherited from DtSingleTaskControllerComponent | |
| virtual void | clearPendingSubtasks () |
| Iterates over collection of all pending subtasks for this controller, and calls clearSubtask() for each subtask type. | |
| virtual void | clearSubtasksByType (const DtSimTaskMessageType &taskType) |
| Clear all subtasks of a given type. | |
Private Member Functions | |
| DtFixedWingDefaultController () | |
| default constructor - should not be called. | |
| DtFixedWingDefaultController (const DtFixedWingDefaultController &orig) | |
| Copy constructor and assignment operator not implemented. | |
| DtFixedWingDefaultController & | operator= (const DtFixedWingDefaultController &orig) |
Additional Inherited Members | |
| Public Types inherited from DtReaderWriter | |
| typedef std::vector < DtSymbolString > | aliasContainer |
| typedef std::vector < DtSymbolString >::iterator | aliasIter |
| typedef std::vector < DtSymbolString > ::const_iterator | aliasConstIter |
| typedef std::pair < DtSymbolString, DtString > | DtVariableNameType |
| Protected Types inherited from DtTaskControllerComponent | |
| typedef std::pair < DtTaskMessageCallbackFcn, void * > | DtTaskCallbackMapPair |
| This map stores callbacks that have been registered to processes various tasks. | |
| typedef std::map < DtSimTaskMessageType, DtTaskCallbackMapPair > | DtTaskCallbackMap |
| Protected Attributes inherited from DtFixedWingPilotController | |
| DtFixedWingEntityStateRepository * | myFixedWingEntityState |
| DtFixedWingFlightPSR * | myProcessState |
| Pointer to a process state repository used to store state data associated with this component. | |
| DtOutputPortGroup * | myFixedWingControlPortGroup |
| Output Port Group Name: fixed-wing-control Output Port Group Description: | |
| DtConstrainedAnalogOutputPort * | myThrottlePort |
| Output Port Name: throttle Output Port Description: Output Port Range: 0. | |
| DtConstrainedDualAxisAnalogOutputPort * | myStickPort |
| Output Port Name: stick Output Port Description: Output Port Range: X: -1. | |
| DtConstrainedAnalogOutputPort * | myPedalPort |
| Output Port Name: pedal Output Port Description: Output Port Range: -1. | |
| DtConstrainedAnalogOutputPort * | myBrakePort |
| Output Port Name: brake Output Port Description: Output Port Range: 0. | |
| DtBooleanOutputPort * | myFlapsDeployedPort |
| Output Port Name: flaps Output Port Description: Output Port Range: Output Port Default Value: true Output Group Parent: fixed-wing-control. | |
| Static Protected Attributes inherited from DtSimComponent | |
| static DtSimComponentFactory * | myFactory |
DtFixedWingDefaultController is a controller used to direct a fixed wing entity to loiter when it is in the air and not otherwise tasked.
It can also respond to orbit tasks.
End User Description: This controller is normally placed after all other controllers on the controller component list of fixed-wing entities. If no other controller has taken control of the fixed wing port group by the time this controller is ticked, it flies the entity in a circle. This controller will also respond to orbit tasks, which allows the user to specify the location, radius and direction of the orbit. This component is specified with a DtFixedWingDefaultControllerDescriptor on the controller list.
Uses Descriptor Type: DtFixedWingDefaultControllerDescriptor
| DtFixedWingDefaultController::DtFixedWingDefaultController | ( | const DtString & | name, |
| DtVrfObject * | owner, | ||
| DtSimManager * | simManager, | ||
| DtComponentDescriptor * | desc = 0, |
||
| DtReaderWriterRegistry * | parentRegistry = 0 |
||
| ) |
(const DtString&,DtVrfObject*,DtSimManager*,
| name | Reader writer name of this component. |
| owner | The DtVrfObject that owns this component |
| simManager | The simulation manager (provides access to terrain, message interface, simulation clock). |
| desc | The component descriptor used to initialize this component. |
| parentRegistry | Pointer to the parent reader writer registry (the containing object that reads/writes this object). |
|
virtual |
destructor
|
private |
default constructor - should not be called.
|
private |
Copy constructor and assignment operator not implemented.
|
virtual |
Initialization - Calls base init() and creates and initializes our waypoint.
Reimplemented from DtFixedWingPilotController.
|
virtual |
Calculate new control values.
Reimplemented from DtFixedWingPilotController.
|
virtual |
Returns a string identifies the class type of component.
Type values are defined in compTypes.h. DtSimComponent creation functions are registered with the DtSimComponentFactory using the type values as the key.
Reimplemented from DtFixedWingPilotController.
|
virtual |
Sets/gets radius of circle in process state repository (myProcessState, a DtFixedWingFlightPSR).
|
virtual |
|
virtual |
Sets/gets clockwise flag in process state repository (myProcessState, a DtFixedWingFlightPSR).
|
virtual |
|
static |
(const DtString&,DtVrfObject*,DtSimManager*,
| name | Reader writer name of this component. |
| owner | The DtVrfObject that owns this component |
| simManager | The simulation manager (provides access to terrain, message interface, simulation clock). |
| desc | The component descriptor used to initialize this component. |
| parentRegistry | Pointer to the parent reader writer registry (the containing object that reads/writes this object). |
Reimplemented from DtFixedWingPilotController.
|
virtual |
OBSOLETE - returns 0.
Set/get location of loiter circle from process state repository setLoiterCenter() and loiterCenter().
|
virtual |
Override to initialize loiter clockwise flag and loiter radius parameters in process state repository with values from component descriptor.
Reimplemented from DtFixedWingPilotController.
|
static |
Calls processOrbitTask.
|
virtual |
If the plane is not on the ground, this function will pull out the location, radius and direction of the orbit task and copy them into the process state repository.
|
protectedvirtual |
Overridden to register interest in orbit tasks.
Reimplemented from DtTaskControllerComponent.
|
private |