DtRailMovementDescriptor Class Reference

A DtComponentDescriptor that has parameters that indicate how an entity should move along a rail segment path. More...

Inheritance diagram for DtRailMovementDescriptor:

Public Member Functions
	DtRailMovementDescriptor (const DtString &name, DtReaderWriterRegistry *parentRegistry=0)
	constructor
	DtRailMovementDescriptor (const DtRailMovementDescriptor &orig, DtReaderWriterRegistry *parentRegistry=0)
	copy constructor
DtRailMovementDescriptor &	operator= (const DtRailMovementDescriptor &orig)
	assignment
virtual	~DtRailMovementDescriptor ()
	destructor
virtual DtString	type () const
	Returns the type of descriptor.
virtual DtComponentDescriptor *	clone (DtReaderWriterRegistry *parentRegistry=0) const
virtual void	setUseTurnSmoothing (bool smooth)
	Accessor/mutator for myUseTurnSmoothing.
virtual bool	useTurnSmoothing () const
	Accessor/mutator for myUseTurnSmoothing.
virtual void	setUseAcceleration (bool acc)
	Accessor/mutator for myUseAcceleration.
virtual bool	useAcceleration () const
	Accessor/mutator for myUseAcceleration.
virtual void	setTurnSpeed (double speed)
	Speed to use in turns.
virtual const double	turnSpeed () const
	Speed to use in turns.
virtual void	setAllowToPass (bool pass)
	Accessor/mutator for #myAllowToPass.
virtual bool	allowToPass () const
	Speed to use in turns.
virtual bool	useHighFidelityGroundClamping () const
	Accessor/mutator for myUseHighFidelityGroundClamping.
virtual void	setUseHighFidelityGroundClamping (bool yesOrNo)
	Accessor/mutator for myUseHighFidelityGroundClamping.
virtual bool	drawDebugTurnSplinePoints () const
	Turn on/off debug turn paths.
virtual void	setDrawDebugTurnSplinePoints (bool draw)
	Turn on/off debug turn paths.
virtual const double	maxFollowThreshold () const
	If entity is following another entity while moving along a rail route, this is the maximum delta they can have off of the follow distance before the rail controller will change the speed.
virtual void	setMaxFollowThreshold (const double threshold)
	If entity is following another entity while moving along a rail route, this is the maximum delta they can have off of the follow distance before the rail controller will change the speed.
virtual const double	convoyFollowSpeedFactor () const
	This is the factor by with to multiply the entity's current speed to catch up or slow down to the the convoy follow target if the entity has one.
virtual void	setConvoyFollowSpeedFactor (const double factor)
	This is the factor by with to multiply the entity's current speed to catch up or slow down to the the convoy follow target if the entity has one.
virtual const double	lookAheadDistance () const
	This is the distance the vehicle will look ahead for obstacles on the road.
virtual void	setLookAheadDistance (const double distance)
	This is the distance the vehicle will look ahead for obstacles on the road.
virtual const double	hitTimeLaneChange () const
	This is the time in seconds before deciding to lane change if about to hit another vehicle.
virtual void	setHitTimeLaneChange (const double time)
	This is the time in seconds before deciding to lane change if about to hit another vehicle.
virtual void	setPassableObjectTypes (const DtRwObjectTypeList &objectTypes)
	Accessor/mutator for #myObjectTypes.
virtual DtRwObjectTypeList &	passableObjectTypes ()
	Accessor/mutator for #myObjectTypes.
virtual const DtRwObjectTypeList &	passableObjectTypes () const
	Accessor/mutator for #myObjectTypes.
Public Member Functions inherited from DtComponentDescriptor
	DtComponentDescriptor (const DtComponentDescriptor &orig, DtReaderWriterRegistry *parentRegistry=NULL)
	copy constructor
DtComponentDescriptor &	operator= (const DtComponentDescriptor &orig)
	assignment
virtual	~DtComponentDescriptor ()
virtual void	putData (FILE *fp, int indentLevel=0)
	Overrides base class putData to output our type.
virtual DtlObjPtr	getData (DtlObjPtr args, const DtFilename &searchPath, const DtVariableBindingsList &variableBindings)
	getData is just used to get us past the type in the data stream, since it's not actually stored.
virtual bool	init ()
	Base class init does nothing, but will be called by createComponentDescriptor(), allowing derived classes to do memory allocation if necessary.
bool	operator== (const DtComponentDescriptor &) const
	DtComponentDescriptor (const DtString &componentName, DtReaderWriterRegistry *parentRegistry=NULL)
	DtComponentDescriptor (const DtSymbolString &componentName, DtReaderWriterRegistry *parentRegistry=NULL)
virtual void	setComponentType (const DtString &componentType)
	Type of DtSimComponent this descriptor is associated with.
virtual const DtString &	componentType () const
	Type of DtSimComponent this descriptor is associated with.
virtual void	setMinTickPeriod (DtReal minTickPeriod)
virtual DtReal	minTickPeriod () const
virtual void	setMinTickPeriodVariance (DtReal minTickPeriodVariance)
virtual DtReal	minTickPeriodVariance () const
virtual void	setTickPeriodUsesRealTime (bool value)
	Accessor/mutator for myTickPeriodUsesRealTime.
virtual bool	tickPeriodUsesRealTime () const
	Accessor/mutator for myTickPeriodUsesRealTime.
virtual const DtString &	processStateRepositoryName () const
	Name which this component will assign to its PSR.
virtual void	setProcessStateRepositoryName (const DtString &name)
	Name which this component will assign to its PSR.
virtual const DtString &	processStateRepositoryType () const
	Type of PSR this component will create.
virtual void	setProcessStateRepositoryType (const DtString &type)
	Type of PSR this component will create.
virtual void	setIsEnabled (bool yesNo)
	Is the component enabled or not.
virtual bool	isEnabled () const
	Is the component enabled or not.
virtual void	setDebugActive (bool active)
	Should detailed debug info be printed for this component.
virtual bool	debugActive ()
	Should detailed debug info be printed for this component.
virtual void	setCreateComponent (bool yesNo)
	Should the component be created or not.
virtual bool	createComponent () const
	Should the component be created or not.
Public Member Functions inherited from DtReaderWriter
	DtReaderWriter ()
	default constructor
	DtReaderWriter (const DtString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false)
	real constructor Setting the readonly flag prevents object from writing itself to the stream.
	DtReaderWriter (const DtSymbolString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false)
	DtReaderWriter (const DtString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL)
	copy constructor
	DtReaderWriter (const DtSymbolString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL)
const DtReaderWriter &	operator= (const DtReaderWriter &orig)
	assignment operator
bool	operator== (const DtReaderWriter &) const
	Equivalence operator.
bool	operator!= (const DtReaderWriter &rhs)
virtual	~DtReaderWriter ()
	destructor
virtual void	putSelf (FILE *fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename())
	Top level call to write itself to file.
virtual void	getSelf (DtlObjPtr args, const DtFilename &searchPath=DtFilename::nullFilename(), const DtVariableBindingsList &variableBindings=nullVariableReference())
	Top level to read itself from an input stream.
virtual void	writeSelf (FILE *fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename())
	Called from putSelf, calls myRegistry.putSelf which in turn calls putSelf on each reader/writer in the registry.
virtual DtSymbolString	name () const
	Accessor for name of this readable/writable object.
virtual void	addAlias (const DtSymbolString &alias)
	Add an alias as an alternative name for this object.
virtual bool	hasAlias (const DtSymbolString &alias)
virtual const aliasContainer &	aliases () const
virtual void	setReadonly (bool flag)
	Set read-only flag.
virtual bool	isReadonly () const
virtual bool	variableIsBound () const
virtual void	unbindVariable ()
	Sets the myVariableIsBound flag to false.
virtual void	setName (const DtString &)
	Set the name of the object.
virtual const char *	readerWriterType () const
	Used to supply a string type that this reader writer type is.
virtual DtString	prettyPrint () const
	Routine to return a human readable form of the reader/writer variable.
virtual void	bindVariables (DtVariableBindingsList variableBindings)
	Runs a variable binding pass on this reader writer and any of its children.
virtual std::list < DtVariableNameType >	unboundVariables () const
bool	invalid () const
virtual bool	hasChild (const DtReaderWriter *p) const
	Returns true if this variable has a child p in it's chain.
virtual void	setValueSpecified (bool specified, bool recurse=false)
	The specified flags are used for optional values.
virtual bool	valueSpecified () const
	The specified flags are used for optional values.
virtual bool	isVariableReference () const
	Specifies whether or not this reader writer is really a variable that is specified elsewhere.
virtual void	setIsVariableReference (bool value)
virtual void	clearAllVariableReferenceFlags ()
	Clears out all variable reference flags from all readerwriter items in registry recursively.
virtual DtSymbolString	variableName () const
	The variable name, if this object is a variable reference.
virtual void	setVariableName (const DtSymbolString variableName)
	The variable name, if this object is a variable reference.
const DtReaderWriterRegistry &	registry () const
	Collection of child DtReaderWriter nodes owned by this object.
DtReaderWriterRegistry &	registry ()
	Collection of child DtReaderWriter nodes owned by this object.

Static Public Member Functions
static DtComponentDescriptor *	creator ()
Static Public Member Functions inherited from DtComponentDescriptor
static void	addComponentDescriptorCreatorFcn (const DtString &type, DtComponentDescriptorCreatorFcn fcn)
	Adds a given component descriptor creation function and corresponding type (defined in compDescTypes.h) to the DtComponentDescriptorFactory.
static DtComponentDescriptor *	createComponentDescriptor (DtlObjPtr mtlStream, const DtFilename &searchPath, const DtVariableBindingsList &variableBindings)
	Creates and initializes a component descriptor when reading in from an MTL (MAK Technologies Lisp) file (i.e.
static DtComponentDescriptor *	createComponentDescriptor (const char *pName)
	Creates and initializes a new instance of this class.
static DtComponentDescriptorFactory *	factory ()
	The factory for creating objects of type DtComponentDescriptor.
static void	setFactory (DtComponentDescriptorFactory *factory)
	The factory for creating objects of type DtComponentDescriptor.
Static Public Member Functions inherited from DtReaderWriter
static void	putIndent (FILE *fp, int indentLevel)
static const DtVariableBindingsList &	nullVariableReference ()
static void	setPostGetSelfCallback (DtGetSelfCallbackFcn fcn, void *usrData)
static void	setPrePutSelfCallback (DtPutSelfCallbackFcn fcn, void *usrData)
static const DtFilename &	appPath ()
	Gets the current working directory.
static void	setFactoryCreatorFunction (DtReaderWriterFactoryCreatorFcn fcn)
	Sets the function to create the DtReaderWriterFactory.
static void	createReaderWriterFactory ()

Protected Member Functions
	DtRailMovementDescriptor ()
	default constructor; not implemented
Protected Member Functions inherited from DtComponentDescriptor
	DtComponentDescriptor ()
	default constructor; not implemented
Protected Member Functions inherited from DtReaderWriter
virtual void	bindToRwAsVariable (const DtReaderWriter *rw)
	Copies values from the specified DtReaderWriter.
virtual void	bindLocalVariables (const DtVariableBindingsList &variableBindings)
	Checks to see if this RW object is a variable reference that can be bound using the provided bindings.
virtual DtlObjPtr	getData (DtlObjPtr args, const DtFilename &searchPath, const DtVariableBindingsList &variableBindings)
	Deriving class overrides these to get/put class specific data.

Protected Attributes
Parameters
These parameters are available for setting in the OPD files.
DtRwBoolean	myUseTurnSmoothing
	Parameter Name: use-turn-smoothing Parameter Description: When true entity will generate a curved path to follow when it turns.
DtRwBoolean	myUseAcceleration
	Parameter Name: use-acceleration Parameter Description: When true velocity changes are not instantaneous, acceleration is used to arrive at the desired velocity over time.
DtRwReal	myTurnSpeed
	Parameter Name: turn-speed Parameter Description: When going thru a turn use this speed if use acceleration is true Parameter Default Value: 2.0 Parameter Units: meters/second.
DtRwBoolean	myAllowPass
	Parameter Name: allow-passing Parameter Description: Determines whether an entity is allow to pass another entiy in front of it provided it has an adjoinging open lane to do so.
DtRwBoolean	myUseHighFidelityGroundClamping
	Parameter Name: use-high-fidelity-ground-clamping Parameter Description: Specifies whether or not to use all four of the entity's support points when determining the orientation/placement of the entities, or to use just the center support point.
DtRwBoolean	myDrawDebugSplineRoute
	Parameter Name: draw-debug-spline-points Parameter Description: Draws the 3 points as a route used to genereate the turn spline Parameter Default Value: True.
DtRwReal	myMaxFollowThreshold
	Parameter Name: convoy-follow-tolerance Parameter Description: This is the maximum delta they can have off of the follow distance before the rail controller will change the speed.
DtRwReal	myConvoySpeedFactor
	Parameter Name: convoy-follow-speed-factor Parameter Description: This is the factor by with to multiply our speed to catch up/slow down to get within the follow threshold of the convoy follow distance.
DtRwReal	myLookAheadDistance
	Parameter Name: rail-look-ahead-distance Parameter Description: This is the distance the vehicle will look ahead while rail driving Parameter Default Value: 30.0;.
DtRwReal	myHitTimeLaneChange
	Parameter Name: rail-hit-time-lane-change Parameter Description: This is the time of impact in which vehicles will decide to change lanes.
DtRwObjectTypeList	myPassableObjectTypes
	Parameter Name: passable-object-types Parameter Description: Object types to treat as potential obstructions that we can drive around.
Protected Attributes inherited from DtComponentDescriptor
DtRwBoolean	myIsEnabled
DtRwBoolean	myDebug
	This parameter defaults to false.
DtRwBoolean	myCreateComponent
DtRwString	myComponentType
	Parameter Name: component-type Parameter Description: String identifying type of component.
DtRwReal	myMinTickPeriod
	Parameter Name: min-tick-period Parameter Description: Minimum tick period for this component.
DtRwReal	myMinTickPeriodVariance
	Parameter Name: min-tick-period-variance Parameter Description: Minimum tick period for this component.
DtRwBoolean	myTickPeriodUsesRealTime
	Parameter Name: tick-period-uses-real-time Parameter Description: Specified whether the min-tick-period and min-tick-period-variance parameters are based on real time or simulation time.
DtRwString	myProcessStateRepositoryName
	Parameter Name: process-state-repository-name Parameter Description: Name of the process state repository associated with this component.
DtRwString	myProcessStateRepositoryType
	Parameter Name: process-state-repository-type Parameter Description: Type of the process state repository assoicated with this component.
Protected Attributes inherited from DtReaderWriter
const DtSymbolString	myName
DtReaderWriterRegistry	myRegistry
bool	myValueSpecified
bool	myReadOnlyFlag
bool	myIsVariableReference
DtSymbolString	myVariableName
bool	myVariableIsBound
aliasContainer	myAliases
	Container for the aliases which represent alternative names for the object.
bool	myInvalid
	Set to true if there is a problem reading this item.

Additional Inherited Members
Public Types inherited from DtReaderWriter
typedef std::vector < DtSymbolString >	aliasContainer
typedef std::vector < DtSymbolString >::iterator	aliasIter
typedef std::vector < DtSymbolString > ::const_iterator	aliasConstIter
typedef std::pair < DtSymbolString, DtString >	DtVariableNameType
typedef DtReaderWriterFactory *(*	DtReaderWriterFactoryCreatorFcn )()
Static Protected Attributes inherited from DtComponentDescriptor
static DtComponentDescriptorFactory *	myFactory

Detailed Description

A DtComponentDescriptor that has parameters that indicate how an entity should move along a rail segment path.

Used by DtRailMovementController

Constructor & Destructor Documentation

DtRailMovementDescriptor::DtRailMovementDescriptor	(	const DtString &	name,
		DtReaderWriterRegistry *	parentRegistry = 0
	)

constructor

DtRailMovementDescriptor::DtRailMovementDescriptor	(	const DtRailMovementDescriptor &	orig,
		DtReaderWriterRegistry *	parentRegistry = 0
	)

copy constructor

virtual DtRailMovementDescriptor::~DtRailMovementDescriptor ( )

virtual

destructor

DtRailMovementDescriptor::DtRailMovementDescriptor ( )

protected

default constructor; not implemented

Member Function Documentation

DtRailMovementDescriptor& DtRailMovementDescriptor::operator=

(

const DtRailMovementDescriptor &

orig

)

assignment

virtual DtString DtRailMovementDescriptor::type ( ) const

virtual

Returns the type of descriptor.

This will be used to create the descriptor on read from an mtl file.

Reimplemented from DtComponentDescriptor.

virtual void DtRailMovementDescriptor::setUseTurnSmoothing ( bool  smooth )

virtual

Accessor/mutator for myUseTurnSmoothing.

virtual bool DtRailMovementDescriptor::useTurnSmoothing ( ) const

virtual

Accessor/mutator for myUseTurnSmoothing.

virtual void DtRailMovementDescriptor::setUseAcceleration ( bool  acc )

virtual

Accessor/mutator for myUseAcceleration.

virtual bool DtRailMovementDescriptor::useAcceleration ( ) const

virtual

Accessor/mutator for myUseAcceleration.

virtual void DtRailMovementDescriptor::setTurnSpeed ( double  speed )

virtual

Speed to use in turns.

virtual const double DtRailMovementDescriptor::turnSpeed ( ) const

virtual

Speed to use in turns.

virtual void DtRailMovementDescriptor::setAllowToPass ( bool  pass )

virtual

Accessor/mutator for #myAllowToPass.

virtual bool DtRailMovementDescriptor::allowToPass ( ) const

virtual

Speed to use in turns.

virtual bool DtRailMovementDescriptor::useHighFidelityGroundClamping ( ) const

virtual

Accessor/mutator for myUseHighFidelityGroundClamping.

virtual void DtRailMovementDescriptor::setUseHighFidelityGroundClamping ( bool  yesOrNo )

virtual

Accessor/mutator for myUseHighFidelityGroundClamping.

virtual bool DtRailMovementDescriptor::drawDebugTurnSplinePoints ( ) const

virtual

Turn on/off debug turn paths.

This will draw a route thru the 3 points used to make the turn spline if turn smoothing is on.

virtual void DtRailMovementDescriptor::setDrawDebugTurnSplinePoints ( bool  draw )

virtual

Turn on/off debug turn paths.

This will draw a route thru the 3 points used to make the turn spline if turn smoothing is on.

virtual const double DtRailMovementDescriptor::maxFollowThreshold ( ) const

virtual

If entity is following another entity while moving along a rail route, this is the maximum delta they can have off of the follow distance before the rail controller will change the speed.

This will help prevent jerky following if the target entity's speed is changing only briefly say at a curve if using acceleration.

virtual void DtRailMovementDescriptor::setMaxFollowThreshold ( const double  threshold )

virtual

If entity is following another entity while moving along a rail route, this is the maximum delta they can have off of the follow distance before the rail controller will change the speed.

This will help prevent jerky following if the target entity's speed is changing only briefly say at a curve if using acceleration.

virtual const double DtRailMovementDescriptor::convoyFollowSpeedFactor ( ) const

virtual

This is the factor by with to multiply the entity's current speed to catch up or slow down to the the convoy follow target if the entity has one.

virtual void DtRailMovementDescriptor::setConvoyFollowSpeedFactor ( const double  factor )

virtual

This is the factor by with to multiply the entity's current speed to catch up or slow down to the the convoy follow target if the entity has one.

virtual const double DtRailMovementDescriptor::lookAheadDistance ( ) const

virtual

This is the distance the vehicle will look ahead for obstacles on the road.

virtual void DtRailMovementDescriptor::setLookAheadDistance ( const double  distance )

virtual

This is the distance the vehicle will look ahead for obstacles on the road.

virtual const double DtRailMovementDescriptor::hitTimeLaneChange ( ) const

virtual

This is the time in seconds before deciding to lane change if about to hit another vehicle.

virtual void DtRailMovementDescriptor::setHitTimeLaneChange ( const double  time )

virtual

This is the time in seconds before deciding to lane change if about to hit another vehicle.

virtual void DtRailMovementDescriptor::setPassableObjectTypes ( const DtRwObjectTypeList &  objectTypes )

virtual

Accessor/mutator for #myObjectTypes.

virtual DtRwObjectTypeList& DtRailMovementDescriptor::passableObjectTypes ( )

virtual

Accessor/mutator for #myObjectTypes.

virtual const DtRwObjectTypeList& DtRailMovementDescriptor::passableObjectTypes ( ) const

virtual

Accessor/mutator for #myObjectTypes.

virtual DtComponentDescriptor* DtRailMovementDescriptor::clone ( DtReaderWriterRegistry *  parentRegistry = 0 ) const

virtual

Reimplemented from DtComponentDescriptor.

static DtComponentDescriptor* DtRailMovementDescriptor::creator ( )

static

Returns

Newly created instance of this class, with an empty DtReaderWriter name. Creation methods are registered with a DtComponentDescriptorFactory, so they can be created on demand as they are read in from a parameter database file.

Reimplemented from DtComponentDescriptor.

Member Data Documentation

DtRwBoolean DtRailMovementDescriptor::myUseTurnSmoothing

protected

Parameter Name: use-turn-smoothing Parameter Description: When true entity will generate a curved path to follow when it turns.

Using this does take more processing. If false, the entity when it comes to a turn will instantenously change it's heading to align with the next segment in the path. Parameter Default Value: true.

DtRwBoolean DtRailMovementDescriptor::myUseAcceleration

protected

Parameter Name: use-acceleration Parameter Description: When true velocity changes are not instantaneous, acceleration is used to arrive at the desired velocity over time.

Parameter Default Value: False

DtRwReal DtRailMovementDescriptor::myTurnSpeed

protected

Parameter Name: turn-speed Parameter Description: When going thru a turn use this speed if use acceleration is true Parameter Default Value: 2.0 Parameter Units: meters/second.

DtRwBoolean DtRailMovementDescriptor::myAllowPass

protected

Parameter Name: allow-passing
Parameter Description: Determines whether an entity is allow to pass another entiy in front of it provided it has an adjoinging open lane to do so.

Parameter Default Value: True

DtRwBoolean DtRailMovementDescriptor::myUseHighFidelityGroundClamping

protected

Parameter Name: use-high-fidelity-ground-clamping
Parameter Description: Specifies whether or not to use all four of the entity's support points when determining the orientation/placement of the entities, or to use just the center support point.

For most entities on most terrains, the single support point is an acceptable trade-off, but the default value is true to ensure more correct behavior in general. For complex terrains, large numbers of ground entities (especially individual platform entities), this can be a noticeable performance improvement.
Parameter Default Value: True

Note

Implementation Detail: This only affects the placement of entities in the update() function, when calculating orientation, and does not affect general placement, which is done through the entity state repository.

DtRwBoolean DtRailMovementDescriptor::myDrawDebugSplineRoute

protected

Parameter Name: draw-debug-spline-points
Parameter Description: Draws the 3 points as a route used to genereate the turn spline
Parameter Default Value: True.

DtRwReal DtRailMovementDescriptor::myMaxFollowThreshold

protected

Parameter Name: convoy-follow-tolerance
Parameter Description: This is the maximum delta they can have off of the follow distance before the rail controller will change the speed.

This will help prevent jerky following if the target entity's speed is changing only briefly say at a curve if using acceleration.
Parameter Default Value: 5 m

DtRwReal DtRailMovementDescriptor::myConvoySpeedFactor

protected

Parameter Name: convoy-follow-speed-factor
Parameter Description: This is the factor by with to multiply our speed to catch up/slow down to get within the follow threshold of the convoy follow distance.

Parameter Default Value: 1.1;

DtRwReal DtRailMovementDescriptor::myLookAheadDistance

protected

Parameter Name: rail-look-ahead-distance
Parameter Description: This is the distance the vehicle will look ahead while rail driving Parameter Default Value: 30.0;.

DtRwReal DtRailMovementDescriptor::myHitTimeLaneChange

protected

Parameter Name: rail-hit-time-lane-change
Parameter Description: This is the time of impact in which vehicles will decide to change lanes.

Parameter Default Value: 10.0;

DtRwObjectTypeList DtRailMovementDescriptor::myPassableObjectTypes

protected

Parameter Name: passable-object-types
Parameter Description: Object types to treat as potential obstructions that we can drive around.

Parameter Default Value:

---

The documentation for this class was generated from the following file:

• /exports/nfedora7-1/nightly/docs/vrforcesDevelopment.tot/include/vrfobjparam/railMoveControllerDescriptor.h