 |
VR-Forces 4.6.1 Class Documentation
|
All Classes Namespaces Files Functions Variables Typedefs Enumerations Enumerator Properties Friends Macros Groups Pages
|
VR-Forces 4.6.1 Class Documentation
|
DtGroundMoveToLocationControllerComponent; models movement to a location for ground vehicles. More...
Public Member Functions | |
| DtGroundMoveToLocationControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString&,DtVrfObject*,DtSimManager*, | |
| virtual | ~DtGroundMoveToLocationControllerComponent () |
| destructor | |
| virtual const char * | type () const |
| Returns a string identifies the class type of component. | |
| virtual void | processMoveToLocationTask (DtSimMessage *msg) |
| virtual void | registerTaskMsgCallbacks () |
| Overridden to register interest in move to and set location commands. | |
 Public Member Functions inherited from DtGroundMoveToDestinationControllerComponent | |
| DtGroundMoveToDestinationControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString&,DtVrfObject*,DtSimManager*, | |
| virtual | ~DtGroundMoveToDestinationControllerComponent () |
| destructor | |
| virtual bool | init () |
| Initializes modifyVrfObjectCallback. | |
| virtual void | setComponentDescriptor (DtComponentDescriptor *componentDescriptor) |
| Overridden to cast and set our local pointer to the descriptor. | |
| virtual void | tick () |
| Looks at the value on myCollisionAvoidancePort, and if there is a value and the destination point is within the bounding volume of the collision object, setDestinationIsInsideObstruction(true) is called. | |
| virtual void | processSetLocation (DtSimMessage *msg) |
| Resets the destination vector when the location of the entity to which this controller is attached is changed through a set location request. | |
| virtual void | processModifyVrfObject (DtSimMessage *msg) |
| Resets the destination vector when the location of the entity to which this controller is attached is changed through a DtIfModifyVrfObject message (i.e. | |
| virtual void | clearTask () |
| Releases the nav interface and then calls the parent clearTask(). | |
| virtual bool | getDestination (DtVector &destination) |
| getDestination() | |
| virtual const DtVector & | destinationVector () const |
| Returns the current destination vector for the entity. | |
| virtual double | findDesiredSpeed () |
| Determines how fast we should go. | |
| virtual double | findDesiredHeading () |
| Determines the desired heading in the following manner: If the myNearDestination member variable is true (set by nearDestination()), the desired heading is in the opposite direction as the destination vector (described in setupDestinationVector()). | |
| virtual DtAutoTransmissionGearEnum | determineGearSetting () |
| Sets myProcessState->myCurrentGear to DtAutoGearReverse or DtAutoGearForward based on sign of orderedSpeed(). | |
| virtual bool | nearDestination () |
| Determines if the entity is close enough to the destination that it should start slowing down (see findDesiredSpeed()). | |
| virtual bool | atDestination () |
| Are we within the at-distance parameter to the destination? If the myDistanceSquared member calculated in tick() is less than or equal to the square of the value provided in the at-distance parameter of the DtGroundMoveToDescriptor, atDestination() sets myAtDestination to true. | |
| virtual bool | passedDestination () |
| Determines if the entity will pass the destination to which it is moving this frame if it continues at its current velocity and acceleration. | |
| virtual void | stop () |
| Set port values for stopping, and mark the task complete. | |
| virtual void | doMoving () |
| Calls determineGearSetting(), findDesiredSpeed() and findDesiredHeading() and then sets port values based on those results. | |
| virtual void | updateTaskVisualizations () |
| Called to update task visualizations after every tick. | |
| Public Member Functions inherited from DtGroundAutoControllerComponent | |
| DtGroundAutoControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString&,DtVrfObject*,DtSimManager*, | |
| virtual | ~DtGroundAutoControllerComponent () |
| destructor | |
| virtual double | approximateThrottle (double desiredSpeed) |
| Pre- 4.1:approximateThrottle attempts to guess the throttle setting needed to make the automotive actuator produce the desired speed, given the current slope and soil. | |
| virtual double | calculateSteering (double currentHeading, double desiredHeading) const |
| virtual double | calculateCurrentBrakingDistance () const |
| virtual bool | createAutomotiveControlPortGroup () |
| These are called in init to create the ports used to communicate with the actuator. | |
| virtual bool | createThrottlePort () |
| virtual bool | createSteeringPort () |
| virtual bool | createBrakePort () |
| virtual bool | createGearPort () |
| virtual bool | createParkingBrakePort () |
| virtual DtConstrainedAnalogOutputPort * | throttlePort () |
| virtual DtConstrainedAnalogOutputPort * | steeringPort () |
| virtual DtConstrainedAnalogOutputPort * | brakePort () |
| virtual DtConstrainedIntegerOutputPort * | gearPort () |
| virtual DtBooleanOutputPort * | parkingBrakePort () |
| virtual double | decelerationSoilFactor () const |
| virtual double | calcSteeringForTurnInPlace () |
| calcSteering() calculates steering values for executing either a pivot or a (reverse) k turn. | |
| virtual double | calcThrottleForTurnInPlace () |
| calcThrottle() calculates throttle values for executing either a pivot or a (reverse) k turn. | |
| virtual double | calcBrakeForTurnInPlace () |
| If the vehicle can pivot, 0.0 is returned and otherwise a call to calcBrakeForKTurn() is returned. | |
| virtual int | calcGearForTurnInPlace () |
| calcGear() determines the correct gear setting for executing either a pivot or (reverse) k turn. | |
| virtual double | calcSteeringForPivot () |
| calcSteeringForPivot() determines an appropriate steering value for executing a pivot turn. | |
| virtual double | calcThrottleForPivot () |
| calcThrottleForPivot() determines an appropriate throttle value for executing a pivot turn. | |
| virtual double | calcSteeringForKTurn () |
| If the entity can not pivot, then this method can be used to calculate a steering value for a (reverse) k turn. | |
| virtual double | calcThrottleForKTurn () |
| If the entity can not pivot, then this method can be used to calculate a throttle value for a (reverse) k turn. | |
| virtual double | calcBrakeForKTurn () |
| If kTurnReverseComplete() returns true but the entity is still moving backwards, this function sets the brakes to 1.0 until the entity comes to a complete stop. | |
| virtual double | findSpeedForKTurn () |
| If the entity is in the reverse phase of the k turn, the maximum reverse speed of the vehicle is returned. | |
| virtual double | findHeadingForKTurn () |
| If the entity is in the reverse phase of the k turn, kTurnReverseGoalHeading() is returned, otherwise headingToTurnTo() is returned. | |
| virtual void | setHeadingToTurnTo (double headingToTurnTo) |
| Get/Set the heading we the entity has been tasked to turn to. | |
| virtual double | headingToTurnTo () const |
| virtual double | calculateHeadingToTurnTo () |
| The heading to turn to given the current turn mode and heaading to turn to. | |
| virtual void | setTurnToMode (int headingToTurnTo) |
| Get/Set the heading turn to mode (see setHeadingRequest.h for modes) | |
| virtual int | turnToMode () const |
| virtual void | setKTurnReverseGoalHeading (double kTurnReverseGoalHeading) |
| Get/Set the heading that is halfway between the original heading and the heading to turn to. | |
| virtual double | kTurnReverseGoalHeading () const |
| virtual void | setKTurnReverseComplete (bool kTurnReverseComplete) |
| Get/set the flag that indicates whether or not the entity has completed first half of the turn maneuver (backing up until at kTurnReverseGoalHeading()) | |
| virtual bool | kTurnReverseComplete () const |
| Public Member Functions inherited from DtSingleTaskControllerComponent | |
| DtSingleTaskControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *compDesc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString& name, | |
| virtual | ~DtSingleTaskControllerComponent () |
| destructor | |
| virtual void | postTick () |
| Override to check if we're tasked and we want to give up (only performs the check if we're in play mode (dT() > 0)). | |
| virtual bool | beginProcessingTask (const DtTaskMessage &task, DtSimTaskStatePtr taskState) |
| Called by the task manager when this controller should start executing the specified task. | |
| virtual void | taskNotify (const DtSimTask &task) |
| This is called to let us know when some other component receives a task In the case of this component, we don't care what the task actually is. | |
| virtual void | taskComplete (bool success=true) |
| If we are currently tasked, this will cause us to notify the entity that we're done and delete the task. | |
| virtual void | suspendTask () |
| This method is called when the currently running task is being suspended. | |
| virtual int | sendSubtask (DtSimTask &task) |
| Sends subtask to ourself. | |
| virtual void | clearSubtask (int subtaskId) |
| Clears subtask with the given subtaskId (subtaskId is returned sendSubtask()). | |
| virtual void | addPendingSubtaskId (int subtaskId) |
| Adds given subtask Id to list of pending subtasks. | |
| virtual bool | findPendingSubtaskId (int subtaskId) |
| Checks to see if given subtaskId exists in our list of pending subtasks. | |
| virtual bool | isSubtasked () const |
| Returns true if this controller is currently subtasked. | |
| virtual void | removePendingSubtaskId (int subtaskId) |
| Removes pending subtask from list of subtasks for this component. | |
| virtual void | removeAllPendingSubtaskIds () |
| Clear all pending subtasks from our list of subtasks. | |
| virtual std::vector< int > | currentPendingSubstaskIds () const |
| Returns the list of all currently pending subtask ids for this controller. | |
| virtual void | clearCurrentTaskMessage () |
| Returns the current subtask with the specified id. | |
| virtual DtTaskMessage * | currentTaskMessage () const |
| Get a pointer to the message that was used to task this entity. | |
| virtual DtSimTaskStatePtr | currentTaskState () const |
| virtual void | giveUpTask () |
| Called when controller is tasked and decideToGiveUp() returns true. | |
| virtual bool | taskActive (int taskId) const |
| | |
| virtual bool | clearTopLevelTasks () |
| If this controller has any top level tasks (not subtasks), they are cleared. | |
| virtual void | clearConflictingTopLevelTasks (const DtSimTaskMessageType &conflictType) |
| Clears any top level tasks on this controller that conflict with the conflict task type. | |
| virtual void | clearTasksByType (const DtSimTaskMessageType &taskType) |
| Clears any tasks of the specified type running in this controller. | |
| virtual void | clearTaskById (int taskId) |
| Clears any task of the specified ID running in this controller. | |
| virtual DtSuspendedTaskInfo * | suspendTaskById (int taskId) |
| virtual std::list < DtTaskMessage * > | currentTaskMessages () const |
| | |
| virtual DtTaskWithTaskStateListPtr | topLevelTasks () const |
| | |
| Public Member Functions inherited from DtTaskControllerComponent | |
| DtTaskControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *compDesc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString& name, | |
| virtual | ~DtTaskControllerComponent () |
| destructor | |
| virtual bool | showCurrentTaskInGui () const |
| virtual void | setRadio (DtSimRadio *radio) |
| Calls registerTaskMsgCallbacks. | |
| virtual void | addTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtTaskMessageCallbackFcn fcn, void *usr) |
| Adds a new function for processing the specified task type. | |
| virtual void | addTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtMessageCallbackFcn fcn, void *usr) |
| Deprecated form of addTaskProcessorCallback. | |
| virtual void | removeTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtMessageCallbackFcn fcn, void *usr) |
| Undoes anything done by addTaskProcessorCallback(). | |
| virtual void | removeTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtTaskMessageCallbackFcn fcn, void *usr) |
| Deprecated form of removeTaskProcessorCallback. | |
| virtual void | enable () |
| Overridden to call registerTaskMsgCallbacks(). | |
| virtual void | disable () |
| Overridden to 1) remove any task message callbacks registered by this controller 2) call clear task. | |
| virtual void | sendTaskCanceled (DtTaskMessage *taskMsg) |
| Sends the task canceled report for the specified message. | |
| virtual bool | taskVisualizationsActive () const |
| Returns true if task visualizations are currently active for this component. | |
| virtual void | setTasked (bool tasked) |
| The current tasked state of this controller. | |
| virtual bool | tasked () const |
| Public Member Functions inherited from DtControllerComponent | |
| DtControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| (const DtString& name, | |
| virtual | ~DtControllerComponent () |
| destructor | |
| virtual DtSimRadio * | radio () |
| The radio this component is listening to. | |
| Public Member Functions inherited from DtSimComponent | |
| DtSimComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) | |
| virtual | ~DtSimComponent () |
| destructor | |
| void | setParentSystem (DtComponentSystem *system) |
| Sets the parent system of this component. | |
| virtual void | registerAttributeFunctions () |
| Called to register functions that provide system attribute values. | |
| virtual void | preFirstTickInit () |
| This function can be overridden to initialize a component before it is ticked for the first time. | |
| virtual void | timedTick () |
| This version of tick checks to see if the time to tick has arrived. | |
| virtual void | setMinTickPeriod (double minTickPeriod) |
| specifies a minimum tick period (which can also be thought of as | |
| virtual double | minTickPeriod () const |
| access the minimum tick period | |
| virtual void | setMinTickPeriodVariance (double minTickPeriodVariance) |
| set the variance in the minimum tick time | |
| virtual double | minTickPeriodVariance () const |
| access the variance in the minimum tick period | |
| virtual void | setNextTickTime (double nextTickTime) |
| The next tick time is normally calculated internally. | |
| virtual double | nextTickTime () const |
| access the next tick time | |
| virtual double | calculateNextTickTime () const |
| The next tick time is equal to mySimManager->exerciseClock()-> approximateElapsedRealTime() + myMinTickPeriod + a random # between -myMinTickPeriodVariance/2. | |
| virtual double | calculateFirstTickTime () const |
| Returns the first time value that the component should tick at. | |
| virtual void | setEntity (DtVrfObject *entity) |
| The entity's state repository is the place that actuator components make updates and other components look to see our current state. | |
| virtual DtSimComponent * | nextComponent () |
| List management functions. | |
| virtual DtSimComponent * | prevComponent () |
| virtual void | setListItem (DtListItem *item) |
| Used by DtComponentList. | |
| virtual DtListItem * | listItem () |
| virtual void | putData (std::string &fp, int indentLevel=0) |
| putData writes our type, which is provided by the virtual type accessor of the deriving class. | |
| virtual DtlObjPtr | getData (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths, const DtVariableBindingsList &variableBindings) |
| getData is just used to get us past the type in the data stream, since it's not actual stored. | |
| virtual void | addInputPort (DtInputPort *port) |
| Adds this input port to the components input port list so that other components can look it up and attach to it. | |
| virtual void | removeInputPort (DtInputPort *port) |
| virtual DtInputPort * | lookupInputPort (const DtString &portName) |
| Returns a pointer to the input port registered on this component with the specified name. | |
| virtual DtList | inputPortList () const |
| Returns the list of DtInputPorts registered on this component. | |
| virtual void | addOutputPort (DtOutputPort *port) |
| Adds this output port to the components output port list so that other components can look it up and attach to it. | |
| virtual void | removeOutputPort (DtOutputPort *port) |
| virtual DtOutputPort * | lookupOutputPort (const DtString &portName) |
| Returns a pointer to the output port registered on this component with the specified name. | |
| virtual DtList | outputPortList () const |
| Returns the list of DtOutputPorts registered on this component. | |
| virtual void | addInputPortGroup (DtInputPortGroup *group) |
| Adds this input port to the components input port list so that other components can look it up and attach to it. | |
| virtual void | removeInputPortGroup (DtInputPortGroup *group) |
| virtual DtInputPortGroup * | lookupInputPortGroup (const DtString &groupName) |
| Returns a pointer the input port group registered on this component with the specified name. | |
| virtual DtList | inputPortGroupList () const |
| Returns the list of DtInputPortGroups registered on this component. | |
| virtual void | addOutputPortGroup (DtOutputPortGroup *group) |
| Adds this output port group to the components output port group list so that other components can look it up and attach to it. | |
| virtual void | removeOutputPortGroup (DtOutputPortGroup *group) |
| virtual DtOutputPortGroup * | lookupOutputPortGroup (const DtString &groupName) |
| Returns a pointer the output port group registered on this component with the specified name. | |
| virtual DtList | outputPortGroupList () const |
| Returns the list of DtOutputPortGroups registered on this component. | |
| virtual int | priority () const |
| Return the current connection priority for this component. | |
| virtual void | setPriority (int priority) |
| Sets a new connection priority for this component, and changes all current outgoing connections from this component to the new value. | |
| double | dT () const |
| This is the delta-t for this component, which may or may not be the same as the exerciseClock dT. | |
| virtual void | setDT (double deltaT) |
| Note that while dT is calculated internally, this makes it possible to 'lie' to the component about dT if necessary. | |
| virtual const DtComponentDescriptor * | componentDescriptor () const |
| virtual bool | tickWhileDestroyed () const |
| If the component returns true here, it will be ticked regardless of the destroyed state of the host entity. | |
| DtVrfProcessStateRepositoryManager * | psrManager () |
| virtual DtString | componentFullName () const |
| virtual DtPhysicalWorld * | physicalWorld () |
| Gets the physical world that this component's entity exists in. | |
| virtual const DtPhysicalWorld * | physicalWorld () const |
| virtual DtAttachedTerrain * | terrainAttachedTo () |
| Gets the terrain that this component's entity is attached to, if any. | |
| virtual const DtAttachedTerrain * | terrainAttachedTo () const |
| virtual DtVrfObject * | entity () |
| Gets the entity. | |
| virtual const DtVrfObject * | entity () const |
| virtual DtSimManager * | simManager () |
| Gets the sim manager. | |
| virtual const DtSimManager * | simManager () const |
| virtual const Coordinate_System * | coordinateSystem () const |
| Gets the coordinate system, as it should always exist if the physical world is in a valid state! | |
| virtual Coordinate_System * | coordinateSystem () |
| virtual DtVrfObjectStateRepository * | localStateRepository () |
| Gets the local state repository. | |
| virtual const DtVrfObjectStateRepository * | localStateRepository () const |
| virtual DtTaskVisualizationMap & | taskVisualizations () |
| Returns the list of task visualizations for this component. | |
| virtual bool | taskVisualizationsEnabled () const |
| Returns true if task visualizations are enabled for this component. | |
| virtual bool | isEnabled () |
| virtual void | setIsEnabled (bool yesNo) |
| virtual DtOutputStream & | objectConsoleDebug (const DtString &channel="") const |
| virtual DtOutputStream & | objectConsoleVerbose (const DtString &channel="") const |
| virtual DtOutputStream & | objectConsoleInfo (const DtString &channel="") const |
| virtual DtOutputStream & | objectConsoleWarn (const DtString &channel="") const |
| virtual DtOutputStream & | objectConsoleError (const DtString &channel="") const |
| virtual DtSimResourceManager & | resourceManager () |
| virtual const DtSimResourceManager & | resourceManager () const |
| Public Member Functions inherited from DtReaderWriter | |
| DtReaderWriter () | |
| default constructor | |
| DtReaderWriter (const DtString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false) | |
| real constructor Setting the readonly flag prevents object from writing itself to the stream. | |
| DtReaderWriter (const DtSymbolString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false) | |
| DtReaderWriter (const DtString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL) | |
| pseudo-copy constructor | |
| DtReaderWriter (const DtSymbolString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL) | |
| DtReaderWriter (const DtReaderWriter &, DtReaderWriterRegistry *parentRegistry=NULL) | |
| copy constructor | |
| const DtReaderWriter & | operator= (const DtReaderWriter &orig) |
| assignment operator | |
| bool | operator== (const DtReaderWriter &) const |
| Equivalence operator. | |
| bool | operator!= (const DtReaderWriter &rhs) |
| virtual | ~DtReaderWriter () |
| destructor | |
| virtual void | putSelf (std::string &fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename()) |
| Top level call to write itself to file. | |
| virtual void | postPutSelf () |
| Called after either version of put self (file or environment). Default is no-op. | |
| virtual void | prePutSelf () |
| Called before either version of put self (file or environment). Default is no-op. | |
| virtual void | getSelf (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &variableBindings=nullVariableReference()) |
| Top level to read itself from an input stream. | |
| virtual void | postGetSelf () |
| Called after either version of getSelf (mtl or environment). Default is no-op. | |
| virtual void | preGetSelf () |
| Called before either version of get self (file or environment). Default is no-op. | |
| virtual void | writeSelf (std::string &fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename()) |
| Called from putSelf, calls myRegistry.putSelf which in turn calls putSelf on each reader/writer in the registry. | |
| virtual DtSymbolString | name () const |
| Accessor for name of this readable/writable object. | |
| virtual void | addAlias (const DtSymbolString &alias) |
| Add an alias as an alternative name for this object. | |
| virtual void | addAlias (const DtString &alias) |
| virtual bool | hasAlias (const DtSymbolString &alias) |
| virtual const aliasContainer & | aliases () const |
| virtual void | setReadonly (bool flag) |
| Set read-only flag. | |
| bool | isReadonly () const |
| virtual void | reset () |
| For those reader/writer items that support it, resets the reader/writer value to original state Default is no-op. | |
| virtual int | alignment () const |
| For those items that are sent over the network via HLA, this will give the network alignment. | |
| virtual bool | variableIsBound () const |
| virtual void | unbindVariable () |
| Sets the myVariableIsBound flag to false. | |
| virtual void | setName (const DtString &) |
| Set the name of the object. | |
| virtual const char * | readerWriterType () const |
| Used to supply a string type that this reader writer type is. | |
| virtual const char * | xmlType () const |
| virtual DtString | prettyPrint () const |
| Routine to return a human readable form of the reader/writer variable. | |
| std::string | debugText () const |
| virtual void | bindVariables (DtVariableBindingsList variableBindings) |
| Runs a variable binding pass on this reader writer and any of its children. | |
| virtual std::list < DtVariableNameType > | unboundVariables () const |
| bool | invalid () const |
| virtual bool | hasChild (const DtReaderWriter *p) const |
| Returns true if this variable has a child p in it's chain. | |
| virtual bool | hasVariableReference () const |
| Returns true if this item or any item in the registry (recursive) is a variable reference. | |
| virtual void | bindLocalVariables (const DtVariableBindingsList &variableBindings) |
| Checks to see if this RW object is a variable reference that can be bound using the provided bindings. | |
| virtual void | recordUpdateTime () const |
| Can be implemented in subclasses to stamp the time when updated. | |
| virtual bool | wasUpdatedSince (DtTime t) const |
| Can be implemented in subclasses to return true if an update occurred after the specified time. | |
| virtual bool | changedSinceLastChecked () |
| Returns true if this objects value has changed since the last time this function was called. | |
| virtual bool | peekChangedSinceLastChecked () const |
| Returns the value that changedSinceLastChecked would return but does not reset the internal flag. | |
| virtual DtlObjPtr | getData (DtlObjPtr args, const SearchPaths &searchPaths, const DtVariableBindingsList &variableBindings) |
| virtual void | setValueSpecified (bool specified, bool recurse=false) |
| The specified flags are used for optional values. | |
| virtual bool | valueSpecified () const |
| virtual bool | isVariableReference () const |
| Specifies whether or not this reader writer is really a variable that is specified elsewhere. | |
| virtual void | setIsVariableReference (bool value) |
| virtual void | clearAllVariableReferenceFlags () |
| Clears out all variable reference flags from all readerwriter items in registry recursively. | |
| virtual DtSymbolString | variableName () const |
| The variable name, if this object is a variable reference. | |
| virtual void | setVariableName (const DtSymbolString variableName) |
| virtual const DtReaderWriter * | defaultRWValue () const |
| The default value to use if the reader/writer object is a variable and that variable is not specified. | |
| virtual DtReaderWriter * | defaultRWValue () |
| virtual void | setDefaultRWValue (DtReaderWriter *) |
| Previous default value, if exists, will be removed and replaced with a clone of the supplied variable. | |
| virtual bool | checkAndSetDefaultRWValue (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &variableBindings=nullVariableReference()) |
| Give the stream, if the stream contains a default value then set it here. | |
| const DtReaderWriterRegistry & | registry () const |
| Collection of child DtReaderWriter nodes owned by this object. | |
| DtReaderWriterRegistry & | registry () |
| virtual DtPropertyInterface * | property () |
| virtual const DtPropertyInterface * | property () const |
| virtual DtString | toXml () const |
| virtual bool | toXml (const DtFilename &) const |
| Writes contents of xml result to the given filename. | |
| virtual bool | fromXml (const DtString &) |
| Restores object from given xml string. Returns true if valid. | |
| virtual bool | fromXmlFile (const DtFilename &) |
| Restores object from given xml file. | |
| virtual void | putSelf (DtEnvironmentSP, DtEnvValueSP parent) const |
| virtual void | putData (DtEnvironmentSP, DtEnvValueSP value) const |
| Override to add attributes of actual data. | |
| virtual void | putVariableReference (DtEnvironmentSP, DtEnvValueSP value) const |
| Called when the item is a variable reference. | |
| virtual void | getSelf (const DtEnvironmentSP, const DtEnvValueSP root, const SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &bindings=DtVariableBindingsList()) |
| virtual void | getData (const DtEnvironmentSP, const DtEnvValueSP, const SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &bindings=DtVariableBindingsList()) |
| Gets data from the environment value. | |
| virtual void | unrecognizedItem (const DtEnvironmentSP env, const DtEnvValueSP root, const SearchPaths &searchPaths, const DtVariableBindingsList &varBindings) |
| Called when the xml reader tries to parse an unknown reader/writer item. Default is a no-op. | |
| virtual void | getVariableReference (DtEnvironmentSP, DtEnvValueSP value) |
| Called when the item is a variable reference. | |
Static Public Member Functions | |
| static void | moveToLocationCallback (DtSimMessage *msg, void *usr) |
| Instances of this component will register this callback with their own 'this' pointer as user data with the msg executive requesting notification of move-to tasks. | |
| static DtSimComponent * | creator (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) |
| (const DtString&,DtVrfObject*,DtSimManager*, | |
| Static Public Member Functions inherited from DtGroundMoveToDestinationControllerComponent | |
| static void | setLocationCallback (DtSimMessage *msg, void *usr) |
| Calls processSetLocation. | |
| static void | modifyVrfObjectCallback (DtSimMessage *msg, void *usr) |
| Calls processModifyVrfObject. | |
Private Member Functions | |
| DtGroundMoveToLocationControllerComponent () | |
| Default constructor; should not be called. | |
| DtGroundMoveToLocationControllerComponent (const DtGroundMoveToLocationControllerComponent &orig) | |
| copy constructor; shallow; does not copy the ports. | |
| const DtGroundMoveToLocationControllerComponent & | operator= (const DtGroundMoveToDestinationControllerComponent &orig) |
| assignment operator; see comments on copy constructor! | |
Additional Inherited Members | |
| Public Types inherited from DtReaderWriter | |
| typedef std::vector < DtSymbolString > | aliasContainer |
| typedef std::vector < DtSymbolString >::iterator | aliasIter |
| typedef std::vector < DtSymbolString > ::const_iterator | aliasConstIter |
| typedef std::vector< DtFilename > | SearchPaths |
| typedef std::pair < DtSymbolString, DtString > | DtVariableNameType |
| typedef DtReaderWriterFactory *(* | DtReaderWriterFactoryCreatorFcn )() |
| Protected Types inherited from DtTaskControllerComponent | |
| typedef std::pair < DtTaskMessageCallbackFcn, void * > | DtTaskCallbackMapPair |
| This map stores callbacks that have been registered to processes various tasks. | |
| typedef std::map < DtSimTaskMessageType, DtTaskCallbackMapPair > | DtTaskCallbackMap |
| Protected Member Functions inherited from DtGroundMoveToDestinationControllerComponent | |
| virtual bool | setupDestination () |
| This function ensures that the destination stored in the process state matches the member function. | |
| virtual void | setupDestinationVector () const |
| Sets up a vector from the current destination location to the entity's location to use in determining when/if the entity has passed its destination location. | |
| virtual void | invalidateDestinationVector () const |
| Tells the component that any cached destination vector should be recalculated. | |
| virtual double | desiredHeadingFromDestination (const DtDcm &localToTopoDcm) |
| Given the destination, calculate the heading needed to reach that point. | |
| virtual void | moveToDestination () |
| Attempts to move to the destination location. Override to provide movement functionality. | |
| virtual double | distanceToDestination () const |
| virtual bool | decideToGiveUpTask () const |
| Checks to see if destination is inside an obstruction. | |
| virtual bool | createPortGroups () |
| Overridden to create myAutomotiveControlPortGroup. | |
| virtual bool | createPorts () |
| Overridden to create the automotive ports. | |
| virtual void | setDestinationIsInsideObstruction (bool yesNo) |
| Set whether or not current destination is inside an obstruction. | |
| virtual bool | destinationIsInsideObstruction () const |
| Returns whether or not current destination is inside an obstruction. | |
| virtual bool | usingNavBot () |
| virtual void | useNavBotData () |
| Uses calculations from the navBot to control the entity or end the task. | |
| virtual void | updateNavBotDestination () |
| virtual unsigned | maxNumFailedPathAttempts () const |
| Returns the maximum number of times this component will attempt to find a new destination when the desired destination is unreachable. | |
| virtual bool | findAlternateDestination () |
| Finds and sets up an alternate destination nearby the current destination in the case where we are unable to path to that destination. | |
| virtual void | processNavAreaChanged () |
| DtVector | localDestination () const |
| virtual void | processNavigationInterfaceChanged (DtVrfObject *) |
| Static Protected Member Functions inherited from DtGroundMoveToDestinationControllerComponent | |
| static void | navAreaChangedCallback (void *usr) |
| static void | navigationInterfaceChanged (DtVrfObject *, void *usr) |
| Protected Attributes inherited from DtGroundMoveToDestinationControllerComponent | |
| double | myDistanceSquared |
| DtVector | myLocalDestination |
| DtVector | myWorldDestination |
| DtVector | myDestinationVector |
| bool | myDestinationVectorIsValid |
| double | myCurrentSpeed |
| bool | myAtDestination |
| bool | myNearDestination |
| bool | myPassedDestination |
| const DtGroundMoveToDescriptor * | myMoveToDescriptor |
| DtActiveBotNavInterface * | myNavInterface |
| bool | myIgnoreNavData |
| bool | myDestinationIsInsideObstruction |
| unsigned | myNumFailedPathAttempts |
| DtCollisionInputPort * | myCollisionAvoidancePort |
| Input Port Name: potential-collision-info Input Port Description: Input Port Range: Input Port Default Value: Input Group Parent: collision-avoidance-control. | |
| DtInputPortGroup * | myCollisionAvoidancePortGroup |
| Input Port Group Name: collision-avoidance-control Input Port Group Description: | |
| Static Protected Attributes inherited from DtSimComponent | |
| static DtSimComponentFactory * | myFactory |
DtGroundMoveToLocationControllerComponent; models movement to a location for ground vehicles.
DtGroundMoveToControllerComponent is a controller that mdoels movement to a location for ground vehicles.
Developer Description: DtGroundMoveToLocationControllerComponent is derived from DtGroundMoveToDestinationControllerComponent and adds the ability to move towards a specified location.
Uses Descriptor Type: DtGroundMoveToDescriptor
| DtGroundMoveToLocationControllerComponent::DtGroundMoveToLocationControllerComponent | ( | const DtString & | name, |
| DtVrfObject * | owner, | ||
| DtSimManager * | simManager, | ||
| DtComponentDescriptor * | desc = 0, |
||
| DtReaderWriterRegistry * | parentRegistry = 0 |
||
| ) |
(const DtString&,DtVrfObject*,DtSimManager*,
| name | Reader writer name of this component. |
| owner | The DtVrfObject that owns this component |
| simManager | The simulation manager (provides access to terrain, message interface, simulation clock). |
| desc | The component descriptor used to initialize this component. |
| parentRegistry | Pointer to the parent reader writer registry (the containing object that reads/writes this object). |
|
virtual |
destructor
|
private |
Default constructor; should not be called.
Here because the compiler will generate an unprotected one otherwise.
|
private |
copy constructor; shallow; does not copy the ports.
|
virtual |
Returns a string identifies the class type of component.
Type values are defined in compTypes.h. DtSimComponent creation functions are registered with the DtSimComponentFactory using the type values as the key. Warning: this function should always return the same pointer and it should be valid forever. This means the data should be static.
Reimplemented from DtGroundMoveToDestinationControllerComponent.
|
static |
Instances of this component will register this callback with their own 'this' pointer as user data with the msg executive requesting notification of move-to tasks.
|
virtual |
|
static |
(const DtString&,DtVrfObject*,DtSimManager*,
| name | Reader writer name of this component. |
| owner | The DtVrfObject that owns this component |
| simManager | The simulation manager (provides access to terrain, message interface, simulation clock). |
| desc | The component descriptor used to initialize this component. |
| parentRegistry | Pointer to the parent reader writer registry (the containing object that reads/writes this object). |
Reimplemented from DtGroundMoveToDestinationControllerComponent.
|
virtual |
Overridden to register interest in move to and set location commands.
Reimplemented from DtGroundMoveToDestinationControllerComponent.
|
private |
assignment operator; see comments on copy constructor!