End User Description: DtJammerController turns the jammer on and off using Set commands. More...

Inheritance diagram for DtJammerController:

Public Member Functions
	DtJammerController (const DtString &name, DtVrfObject owner, DtSimManager simManager, DtComponentDescriptor desc=0, DtReaderWriterRegistry parentRegistry=0)

virtual	~DtJammerController ()
	destructor More...

virtual const char *	type () const
	This returns a string from compTypes.h, and identifies the type of component. More...

virtual void	tick ()
	Tick the publisher if the component is on. More...

virtual bool	tickWhileDestroyed () const

bool	init ()
	Creates the PSR, sets myDescriptor, creates and inits the emitter system, registers attribute access functions, and registers for setEmitter messages. More...

virtual void	setOn (bool onOff)
	When true, EM Emissions PDUs are published. More...

virtual bool	on () const

virtual void	setMountLocation (const DtVector &location)

virtual DtVector	mountLocation () const

virtual void	setSystemNameEnum (DtEmitterSysName nameEnum)

virtual DtEmitterSysName	systemNameEnum () const

virtual void	setSystemFunction (DtEmissionFunc functionEnum)

virtual DtEmissionFunc	systemFunction () const

virtual DtVrfEmitterSystem *	emitterSystem ()
	Returns the DtVrfEmitterSystem that is implementing the publishing of emitter beams. More...

virtual void	enable ()
	Is this component enabled or not. More...

virtual void	disable ()
	disable of this controller will delete the associated VRL publisher. More...

Public Member Functions inherited from DtControllerComponent
	DtControllerComponent (const DtString &name, DtVrfObject owner, DtSimManager simManager, DtComponentDescriptor desc=0, DtReaderWriterRegistry parentRegistry=0)

virtual	~DtControllerComponent ()
	destructor More...

virtual DtSimRadio *	radio ()
	The radio this component is listening to. More...

virtual void	taskNotify (const DtSimTask &task)
	This is used by the entity to notify all controllers that a new task has been received. More...

virtual void	clearTask ()
	Called when you want to clear out this component's task state. More...

Public Member Functions inherited from DtSimComponent
	DtSimComponent (const DtString &name, DtVrfObject owner, DtSimManager simManager, DtComponentDescriptor desc=0, DtReaderWriterRegistry parentRegistry=0)

virtual	~DtSimComponent ()
	destructor More...

virtual void	setParentSystem (DtComponentSystem *system)
	Sets the parent system of this component. More...

DtComponentSystem *	parentSystem () const

virtual bool	postAddComponentsInit ()
	Called after all components have been created, initialized and added to the component manager. More...

virtual void	registerAttributeFunctions ()
	Called to register functions that provide system attribute values. More...

virtual void	preFirstTickInit ()
	This function can be overridden to initialize a component before it is ticked for the first time. More...

virtual void	postTick ()
	This function is called immediately after tick() is called. More...

virtual void	timedTick ()
	This version of tick checks to see if the time to tick has arrived. More...

virtual void	setMinTickPeriod (double minTickPeriod)
	specifies a minimum tick period (which can also be thought of as More...

virtual double	minTickPeriod () const
	access the minimum tick period More...

virtual void	setMinTickPeriodVariance (double minTickPeriodVariance)
	set the variance in the minimum tick time More...

virtual double	minTickPeriodVariance () const
	access the variance in the minimum tick period More...

virtual void	setNextTickTime (double nextTickTime)
	The next tick time is normally calculated internally. More...

virtual double	nextTickTime () const
	access the next tick time More...

virtual double	calculateNextTickTime () const
	The next tick time is equal to mySimManager->exerciseClock()-> approximateElapsedRealTime() + myMinTickPeriod + a random # between -myMinTickPeriodVariance/2. More...

virtual double	calculateFirstTickTime () const
	Returns the first time value that the component should tick at. More...

virtual void	setEntity (DtVrfObject *entity)
	The entity's state repository is the place that actuator components make updates and other components look to see our current state. More...

virtual DtSimComponent *	nextComponent ()
	List management functions. More...

virtual DtSimComponent *	prevComponent ()

virtual void	setListItem (DtListItem *item)
	Used by DtComponentList. More...

virtual DtListItem *	listItem ()

virtual void	putData (std::string &fp, int indentLevel=0)
	putData writes our type, which is provided by the virtual type accessor of the deriving class. More...

virtual DtlObjPtr	getData (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths, const DtVariableBindingsList &variableBindings)
	getData is just used to get us past the type in the data stream, since it's not actual stored. More...

virtual void	addInputPort (DtInputPort *port)
	Adds this input port to the components input port list so that other components can look it up and attach to it. More...

virtual void	removeInputPort (DtInputPort *port)

virtual DtInputPort *	lookupInputPort (const DtString &portName)
	Returns a pointer to the input port registered on this component with the specified name. More...

virtual DtList	inputPortList () const
	Returns the list of DtInputPorts registered on this component. More...

virtual void	addOutputPort (DtOutputPort *port)
	Adds this output port to the components output port list so that other components can look it up and attach to it. More...

virtual void	removeOutputPort (DtOutputPort *port)

virtual DtOutputPort *	lookupOutputPort (const DtString &portName)
	Returns a pointer to the output port registered on this component with the specified name. More...

virtual DtList	outputPortList () const
	Returns the list of DtOutputPorts registered on this component. More...

virtual void	addInputPortGroup (DtInputPortGroup *group)
	Adds this input port to the components input port list so that other components can look it up and attach to it. More...

virtual void	removeInputPortGroup (DtInputPortGroup *group)

virtual DtInputPortGroup *	lookupInputPortGroup (const DtString &groupName)
	Returns a pointer the input port group registered on this component with the specified name. More...

virtual DtList	inputPortGroupList () const
	Returns the list of DtInputPortGroups registered on this component. More...

virtual void	addOutputPortGroup (DtOutputPortGroup *group)
	Adds this output port group to the components output port group list so that other components can look it up and attach to it. More...

virtual void	removeOutputPortGroup (DtOutputPortGroup *group)

virtual DtOutputPortGroup *	lookupOutputPortGroup (const DtString &groupName)
	Returns a pointer the output port group registered on this component with the specified name. More...

virtual DtList	outputPortGroupList () const
	Returns the list of DtOutputPortGroups registered on this component. More...

virtual int	priority () const
	Return the current connection priority for this component. More...

virtual void	setPriority (int priority)
	Sets a new connection priority for this component, and changes all current outgoing connections from this component to the new value. More...

double	dT () const
	This is the delta-t for this component, which may or may not be the same as the exerciseClock dT. More...

virtual void	setDT (double deltaT)
	Note that while dT is calculated internally, this makes it possible to 'lie' to the component about dT if necessary. More...

virtual void	setComponentDescriptor (DtComponentDescriptor *componentDescriptor)
	The component descriptor specified in the order of battle file or parameter file that was used to create this component. More...

virtual const DtComponentDescriptor *	componentDescriptor () const

DtVrfProcessStateRepositoryManager *	psrManager ()

virtual const DtSymbolString &	componentFullName () const

DtPhysicalWorld *	physicalWorld ()
	Gets the physical world that this component's entity exists in. More...

const DtPhysicalWorld *	physicalWorld () const

DtAttachedTerrain *	terrainAttachedTo ()
	Gets the terrain that this component's entity is attached to, if any. More...

const DtAttachedTerrain *	terrainAttachedTo () const

DtVrfObject *	entity ()
	Gets the entity. More...

const DtVrfObject *	entity () const

const DtVrfObject *	const_entity () const
	You would want to use this call if you could be either a const or non-const entity, and you wanted to be sure you only had const access. More...

DtSimManager *	simManager ()
	Gets the sim manager. More...

const DtSimManager *	simManager () const

const Coordinate_System *	coordinateSystem () const
	Gets the coordinate system, as it should always exist if the physical world is in a valid state! More...

DtVrfObjectStateRepository *	localStateRepository ()
	Gets the local state repository. More...

const DtVrfObjectStateRepository *	localStateRepository () const

const DtVrfObjectStateRepository *	const_localStateRepository () const
	You would want to use this call if you could be either a const or non-const local state repository, and you wanted to be sure you only had const access. More...

virtual DtTaskVisualizationMap &	taskVisualizations ()
	Returns the list of task visualizations for this component. More...

virtual bool	taskVisualizationsActive () const
	Returns true if task visualizations are currently active for this component. More...

virtual bool	taskVisualizationsEnabled () const
	Returns true if task visualizations are enabled for this component. More...

virtual bool	isThreadSafe () const
	Returns true if this component is marked as being thread safe. More...

virtual void	addVRLinkDeferredJob (const boost::function< void()> &callback)
	Adds a deferred job to the VRLink job queue in the DtParallelTickManager, but only if this component is marked at thread safe. More...

virtual bool	isEnabled ()

virtual void	setIsEnabled (bool yesNo)

virtual DtOutputStream &	objectConsoleDebug (const DtString &channel="") const

virtual DtOutputStream &	objectConsoleVerbose (const DtString &channel="") const

virtual DtOutputStream &	objectConsoleInfo (const DtString &channel="") const

virtual DtOutputStream &	objectConsoleWarn (const DtString &channel="") const

virtual DtOutputStream &	objectConsoleError (const DtString &channel="") const

virtual DtSimResourceManager &	resourceManager ()

virtual const DtSimResourceManager &	resourceManager () const

Public Member Functions inherited from DtReaderWriter
	DtReaderWriter ()
	default constructor More...

	DtReaderWriter (const DtString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false)
	real constructor Setting the readonly flag prevents object from writing itself to the stream. More...

	DtReaderWriter (const DtSymbolString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false)

	DtReaderWriter (const DtString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL)
	pseudo-copy constructor More...

	DtReaderWriter (const DtSymbolString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL)

	DtReaderWriter (const DtReaderWriter &, DtReaderWriterRegistry *parentRegistry=NULL)
	copy constructor More...

const DtReaderWriter &	operator= (const DtReaderWriter &orig)
	assignment operator More...

bool	operator== (const DtReaderWriter &) const
	Equivalence operator. More...

bool	operator!= (const DtReaderWriter &rhs)

virtual	~DtReaderWriter ()
	destructor More...

virtual void	putSelf (std::string &fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename())
	Top level call to write itself to file. More...

virtual void	postPutSelf ()
	Called after either version of put self (file or environment). Default is no-op. More...

virtual void	prePutSelf ()
	Called before either version of put self (file or environment). Default is no-op. More...

virtual void	getSelf (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &variableBindings=nullVariableReference())
	Top level to read itself from an input stream. More...

virtual void	postGetSelf ()
	Called after either version of getSelf (mtl or environment). Default is no-op. More...

virtual void	preGetSelf ()
	Called before either version of get self (file or environment). Default is no-op. More...

virtual void	writeSelf (std::string &fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename())
	Called from putSelf, calls myRegistry.putSelf which in turn calls putSelf on each reader/writer in the registry. More...

virtual DtSymbolString	name () const
	Accessor for name of this readable/writable object. More...

virtual void	addAlias (const DtSymbolString &alias)
	Add an alias as an alternative name for this object. More...

virtual void	addAlias (const DtString &alias)

virtual bool	hasAlias (const DtSymbolString &alias)

virtual const aliasContainer &	aliases () const

virtual void	setReadonly (bool flag)
	Set read-only flag. More...

bool	isReadonly () const

virtual void	reset ()
	For those reader/writer items that support it, resets the reader/writer value to original state Default is no-op. More...

virtual int	alignment () const
	For those items that are sent over the network via HLA, this will give the network alignment. More...

virtual bool	variableIsBound () const

virtual void	unbindVariable ()
	Sets the myVariableIsBound flag to false. More...

virtual void	setName (const DtString &)
	Set the name of the object. More...

virtual const char *	readerWriterType () const
	Used to supply a string type that this reader writer type is. More...

virtual const char *	xmlType () const

virtual DtString	prettyPrint () const
	Routine to return a human readable form of the reader/writer variable. More...

std::string	debugText () const

virtual void	bindVariables (DtVariableBindingsList variableBindings)
	Runs a variable binding pass on this reader writer and any of its children. More...

virtual std::list < DtVariableNameType >	unboundVariables () const

bool	invalid () const

virtual bool	hasChild (const DtReaderWriter *p) const
	Returns true if this variable has a child p in it's chain. More...

virtual bool	hasVariableReference () const
	Returns true if this item or any item in the registry (recursive) is a variable reference. More...

virtual void	bindLocalVariables (const DtVariableBindingsList &variableBindings)
	Checks to see if this RW object is a variable reference that can be bound using the provided bindings. More...

virtual void	recordUpdateTime () const
	Can be implemented in subclasses to stamp the time when updated. More...

virtual bool	wasUpdatedSince (DtTime t) const
	Can be implemented in subclasses to return true if an update occurred after the specified time. More...

virtual bool	changedSinceLastChecked ()
	Returns true if this objects value has changed since the last time this function was called. More...

virtual bool	peekChangedSinceLastChecked () const
	Returns the value that changedSinceLastChecked would return but does not reset the internal flag. More...

virtual void	setValueSpecified (bool specified, bool recurse=false)
	The specified flags are used for optional values. More...

virtual bool	valueSpecified () const

virtual bool	isVariableReference () const
	Specifies whether or not this reader writer is really a variable that is specified elsewhere. More...

virtual void	setIsVariableReference (bool value)

virtual void	clearAllVariableReferenceFlags ()
	Clears out all variable reference flags from all readerwriter items in registry recursively. More...

virtual DtSymbolString	variableName () const
	The variable name, if this object is a variable reference. More...

virtual void	setVariableName (const DtSymbolString variableName)

virtual const DtReaderWriter *	defaultRWValue () const
	The default value to use if the reader/writer object is a variable and that variable is not specified. More...

virtual DtReaderWriter *	defaultRWValue ()

virtual void	setDefaultRWValue (DtReaderWriter *)
	Previous default value, if exists, will be removed and replaced with a clone of the supplied variable. More...

virtual bool	checkAndSetDefaultRWValue (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &variableBindings=nullVariableReference())
	Give the stream, if the stream contains a default value then set it here. More...

const DtReaderWriterRegistry &	registry () const
	Collection of child DtReaderWriter nodes owned by this object. More...

DtReaderWriterRegistry &	registry ()

virtual DtPropertyInterface *	property ()

virtual const DtPropertyInterface *	property () const

virtual DtString	toXml () const

virtual DtRwVariableBindings *	generateVariableBindings () const
	Iterates over the registry (recursively) and returns a variable bindings object that contains all the variables that are contained in this read/writer class. More...

virtual bool	toXml (const DtFilename &) const
	Writes contents of xml result to the given filename. More...

virtual bool	fromXml (const DtString &)
	Restores object from given xml string. Returns true if valid. More...

virtual bool	fromXmlFile (const DtFilename &)
	Restores object from given xml file. More...

virtual void	putSelf (DtEnvironmentSP, DtEnvValueSP parent) const

virtual void	putData (DtEnvironmentSP, DtEnvValueSP value) const
	Override to add attributes of actual data. More...

virtual void	putVariableReference (DtEnvironmentSP, DtEnvValueSP value) const
	Called when the item is a variable reference. More...

virtual void	getSelf (const DtEnvironmentSP, const DtEnvValueSP root, const SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &bindings=DtVariableBindingsList())

virtual void	getData (const DtEnvironmentSP, const DtEnvValueSP, const SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &bindings=DtVariableBindingsList())
	Gets data from the environment value. More...

virtual void	unrecognizedItem (const DtEnvironmentSP env, const DtEnvValueSP root, const SearchPaths &searchPaths, const DtVariableBindingsList &varBindings)
	Called when the xml reader tries to parse an unknown reader/writer item. Default is a no-op. More...

virtual void	getVariableReference (DtEnvironmentSP, DtEnvValueSP value)
	Called when the item is a variable reference. More...

Static Public Member Functions
static DtSimComponent *	creator (const DtString &name, DtVrfObject owner, DtSimManager simManager, DtComponentDescriptor desc=0, DtReaderWriterRegistry parentRegistry=0)


static DtReaderWriter *	provideIsJammerOn (void *ctrlr)
	Attribute access functions. More...

static DtReaderWriter *	provideJammingStrength (void *ctrlr)
	Provides the comms jamming strength of the system. More...

static DtReaderWriter *	provideJammingRange (void *ctrlr)
	Provides the comms jamming range of the system. More...

static DtReaderWriter *	provideJammerType (void *ctrlr)
	Provides the type of the system ("comms", "radar", etc.) More...

static DtReaderWriter *	provideAllowedPostures (void *ctrlr)
	Provides the string of space or comma-delimited names of. More...

Static Public Member Functions inherited from DtSimComponent
static DtSimComponent *	MarkThreadSafe (DtSimComponent *)
	Marks an instance of a component as being thread safe. More...

static DtSimComponentFactory *	factory ()
	A DtSimComponentFactory is allocated by the DtSimCreator, and this pointer is set. More...

static void	setFactory (DtSimComponentFactory *factory)

static DtSimComponent *	createComponent (const DtString &name, const DtString &type, DtVrfObject owner, DtSimManager simManager, DtComponentSystem parentSystem, DtComponentDescriptor desc=0, DtReaderWriterRegistry *parentRegistry=0)
	Creates a DtSimComponent using the factory, then initializes it via the MTL stream. More...

static void	addSimComponentCreatorFcn (const DtString &type, DtSimComponentCreatorFcn fcn)
	Adds a DtSimComponent creation function to the DtSimComponentFactory, using the given type as the key. More...

Static Public Member Functions inherited from DtReaderWriter
static void	putIndent (std::string &fp, int indentLevel)

static const DtVariableBindingsList &	nullVariableReference ()

static void	setPostGetSelfCallback (DtGetSelfCallbackFcn fcn, void *usrData)

static void	setPrePutSelfCallback (DtPutSelfCallbackFcn fcn, void *usrData)

static void	setPutIndent (bool)

static bool	putIndent ()

static const char *	theXmlType ()
	The type that is used when archiving to an XML stream. More...

static const DtFilename &	appPath ()
	Gets the current working directory. More...

static void	setFactoryCreatorFunction (DtReaderWriterFactoryCreatorFcn fcn)
	Sets the function to create the DtReaderWriterFactory. More...

static void	createReaderWriterFactory ()

static void	cleanupFactory ()

static DtReaderWriterFactory *	factory ()

static void	setOutputStream (DtOutputStream *stream)

static DtOutputStream &	outputStream ()

static DtReaderWriter *	createFromXmlFile (const DtFilename &, bool createAsProperty=false)
	Given a filename, returns a newly created reader/writer object from the object found within. More...

static DtReaderWriter *	createFromXml (const DtString &, bool createAsProperty=false)
	Given a xml string, returns a newly created reader/writer object from the object found within. More...

static DtReaderWriter *	createFromEnvironment (DtEnvironmentSP, bool createAsProperty=false)
	Given a xml environment, returns a newly created reader/writer object from the object found within. More...

static DtString	getAttribute (DtEnvironmentSP env, const DtString &name, DtEnvValueSP root)
	Gets the named attribute from a DtEnvValueSP. More...

Static Public Member Functions inherited from DtObjectDebugger< DtSimComponent >
static DtObjectCounter::CounterType	ObjectCount ()

static const DtObjectContainer *	ObjectContainer ()

Protected Member Functions
virtual bool	createAndInitEmitterSystem ()
	Creates a new DtVrfEmitterSystem and assigns it to myEmitterSystem. More...

virtual void	updateFromDescriptor ()
	copies data from this components descriptor into the state repository. More...

virtual DtList *	beamList ()
	Returns list to the beam repositories. More...

virtual bool	createPSR ()
	Creates myProcessState data member, and adds it to our process state repository manager. More...

virtual const DtJammerEmitterDescriptor *	getDescriptor ()
	Gets the descriptor for use in the provider functions. More...

virtual DtJammerPSR *	getPSR ()
	Gets the PSR for use in the provider functions. More...

Protected Member Functions inherited from DtControllerComponent
	DtControllerComponent ()
	default constructor More...

	DtControllerComponent (const DtControllerComponent &orig)
	copy constructor More...

const DtControllerComponent &	operator= (const DtControllerComponent &orig)
	assignment operator More...

virtual void	onRestore ()
	Override to iterate over the descriptor to see if there are any targetting control tables. More...

virtual void	initializeTargetingControlTableFromDescriptor (const DtReaderWriter *)

virtual void	setRadio (DtSimRadio *radio)

Protected Member Functions inherited from DtSimComponent
virtual double	computeCurrentTime ()
	Compute current time and myDT. More...

bool	testInvariant () const

virtual bool	createPortGroups ()
	Called by init. More...

virtual bool	createPorts ()
	Called by init. More...

DtVrfProcessStateRepository *	createComponentPsr (const DtString &defaultPsrType, const DtString &defaultPsrName, bool useDescriptorParams=true)
	Creates a PSR for this component and registers it with the PSR manager. More...

virtual void	updateTaskVisualizations ()
	Called to update task visualizations after every tick. More...

virtual void	destroyTaskVisualizations ()
	Destroys all task visualizations for this component. More...

virtual void	destroyTaskVisualization (const DtString &name)
	Destroys an existing task visualization. More...

virtual DtPointTaskVisualizationPtr	pointTaskVisualization (const DtString &name)
	Finds an existing or creates a new point task visualization with the given name. More...

virtual DtLineTaskVisualizationPtr	lineTaskVisualization (const DtString &name)
	Finds an existing or creates a new line task visualization with the given name. More...

virtual DtAreaTaskVisualizationPtr	areaTaskVisualization (const DtString &name)
	Finds an existing or creates a new area task visualization with the given name. More...

virtual DtTextTaskVisualizationPtr	textTaskVisualization (const DtString &name)
	Finds an existing or creates a new text task visualization with the given name. More...

double	calculateNextTaskVisTickTime () const
	Determines the next time the task visualizations should be ticked. More...

Protected Member Functions inherited from DtReaderWriter
virtual void	bindToRwAsVariable (const DtReaderWriter *rw)
	Copies values from the specified DtReaderWriter. More...

Protected Member Functions inherited from DtObjectDebugger< DtSimComponent >
	DtObjectDebugger ()

	DtObjectDebugger (const DtObjectDebugger &)

	~DtObjectDebugger ()

Protected Attributes
DtJammerPSR *	myProcessState

const DtJammerEmitterDescriptor *	myDescriptor


DtVrfEmitterSystem *	myEmitterSystem
	Local copies of the emitter information. More...

bool	myStateRestored
	Set to true once previously checkpointed state (if any) is restored. More...

DtU8	myEmitterSystemId

Protected Attributes inherited from DtControllerComponent
DtSimRadio *	myRadio
	Controller components can send messages. More...

Protected Attributes inherited from DtSimComponent
DtVrfObject *	myEntity

DtVrfObjectStateRepository *	myLocalStateRepository

DtSimManager *	mySimManager

DtComponentSystem *	mySystem
	Pointer to the DtComponentSystem that this component belongs. More...

DtListItem *	myListItem

DtInputPortMap	myInputPortList

DtOutputPortMap	myOutputPortList

DtInputPortGroupMap	myInputPortGroupList

DtOutputPortGroupMap	myOutputPortGroupList

int	myPriority

double	myMinTickPeriod

double	myMinTickPeriodVariance

double	myNextTickTime

double	myLastTickSimTime

double	myDT

bool	myIsEnabled
	Indicates whether this component should be enabled for ticking or not. More...

bool	myFirstTick
	Initialized to true in the constructor, set to false by the first call to postTick. More...

bool	myIsThreadSafe
	Whether this component can be use the DtCriticalSection versions of the tick functions and be ticked in parallel with other components Defaults to false. More...

const DtComponentDescriptor *	myComponentDescriptor

std::list < DtVrfProcessStateRepository * >	myComponentPsrs
	List of PSRs made using createComponentPsr() that will be deleted by this component when it is destroyed. More...

bool	myTickEveryFrame
	Flag indicating that tickPeriod is set to 0, and the component will tick every frame. More...

DtTaskVisualizationMap	myTaskVisualizations
	The visualization objects to be drawn for this component. More...

double	myNextTaskVisTickTime
	The next tick time for updating the task visualizations. More...

DtSymbolString	myFullComponentName

Protected Attributes inherited from DtReaderWriter
const DtSymbolString	myName

DtReaderWriterRegistry	myRegistry

DtReaderWriterRegistry *	myParentRegistry

bool	myValueSpecified

bool	myReadOnlyFlag

bool	myIsVariableReference

DtSymbolString	myVariableName

bool	myVariableIsBound

DtReaderWriter *	myDefaultValue

aliasContainer	myAliases
	Container for the aliases which represent alternative names for the object. More...

bool	myInvalid
	Set to true if there is a problem reading this item. More...

bool	myChangedFlag
	Set to true when value changes Set to false when value checked with changedSinceLastChecked. More...

Private Member Functions

	DtJammerController ()
	Not implemented. More...

	DtJammerController (const DtJammerController &orig)

const DtJammerController &	operator= (const DtJammerController &orig)

virtual void	processSetEmitterRequestMessage (DtSimMessage *msg)
	Calls setEmitterSystemOn() with the value specified in the message if the message matches our emitter system ID. More...

static void	setEmitterRequestCallback (DtSimMessage msg, void usrData)
	Handle setEmitter (on/off)Static callback method for setEmitter messages. More...

void	processRequestRadarModesAdmin (const DtUUID &receiver, const DtUUID &sender, const DtVrfObjectMessage *msg)

static void	requestRadarModesAdminCallback (const DtVrfObjectMessage msg, void usr)
	Handle requestRadarModes. More...

Additional Inherited Members
Public Types inherited from DtReaderWriter
typedef std::vector < DtSymbolString >	aliasContainer

typedef std::vector < DtSymbolString >::iterator	aliasIter

typedef std::vector < DtSymbolString > ::const_iterator	aliasConstIter

typedef std::vector< DtFilename >	SearchPaths

typedef std::pair < DtSymbolString, DtString >	DtVariableNameType

typedef DtReaderWriterFactory (	DtReaderWriterFactoryCreatorFcn )()

Protected Types inherited from DtSimComponent
typedef std::map< DtString, DtInputPort * >	DtInputPortMap

typedef std::map< DtString, DtOutputPort * >	DtOutputPortMap

typedef std::map< DtString, DtInputPortGroup * >	DtInputPortGroupMap

typedef std::map< DtString, DtOutputPortGroup * >	DtOutputPortGroupMap

Static Protected Attributes inherited from DtSimComponent
static DtSimComponentFactory *	myFactory

Static Protected Attributes inherited from DtReaderWriter
static DtString	theUnspecifiedValue

static DtGetSelfCallbackInfo	thePostGetSelfCallback

static DtPutSelfCallbackInfo	thePrePutSelfCallback

static const DtVariableBindingsList	theEmptyVariableBindingsList

static bool	theCreatorFcnSet

static DtReaderWriterFactory *	theFactory

static DtReaderWriterFactoryCreatorFcn	theFactoryCreatorFcn

static bool	thePutIndent

static DtOutputStream *	theOutputStream

Detailed Description

End User Description: DtJammerController turns the jammer on and off using Set commands.

It also publishes emitter info.
Developer Description: The DtJammerController class extends the base DtControllerComponent. It does not implement any tasks, but implements sets for turning comms and radar jamming on and off. It uses some of the same code as DtEmmitterComponent.

Constructor & Destructor Documentation

DtJammerController::DtJammerController ( )

private

Not implemented.

DtJammerController::DtJammerController ( const DtJammerController & orig )

private

DtJammerController::DtJammerController	(	const DtString &	name,
		DtVrfObject *	owner,
		DtSimManager *	simManager,
		DtComponentDescriptor *	desc = `0`,
		DtReaderWriterRegistry *	parentRegistry = `0`
	)

Parameters

name	Reader writer name of this component.
owner	The DtVrfObject that owns this component
simManager	The simulation manager (provides access to terrain, message interface, simulation clock).
desc	The component descriptor used to initialize this component.
parentRegistry	Pointer to the parent reader writer registry (the containing object that reads/writes this object).

virtual DtJammerController::~DtJammerController ( )

virtual

destructor

Member Function Documentation

const DtJammerController& DtJammerController::operator= ( const DtJammerController & orig )

private

virtual const char* DtJammerController::type ( ) const

virtual

This returns a string from compTypes.h, and identifies the type of component.

Implements DtControllerComponent.

virtual void DtJammerController::tick ( )

virtual

Tick the publisher if the component is on.

Reimplemented from DtSimComponent.

virtual bool DtJammerController::tickWhileDestroyed ( ) const

virtual

Returns: true. Necessary in order to stop publishing emitter system when entity is destroyed.

Reimplemented from DtSimComponent.

bool DtJammerController::init ( )

virtual

Creates the PSR, sets myDescriptor, creates and inits the emitter system, registers attribute access functions, and registers for setEmitter messages.

Reimplemented from DtControllerComponent.

static DtReaderWriter* DtJammerController::provideIsJammerOn ( void * ctrlr )

static

Attribute access functions.

These functions are registered with the parent system in init().

Provides an indication of whether the jammer is on.

static DtReaderWriter* DtJammerController::provideJammingStrength ( void * ctrlr )

static

Provides the comms jamming strength of the system.

static DtReaderWriter* DtJammerController::provideJammingRange ( void * ctrlr )

static

Provides the comms jamming range of the system.

static DtReaderWriter* DtJammerController::provideJammerType ( void * ctrlr )

static

Provides the type of the system ("comms", "radar", etc.)

static DtReaderWriter* DtJammerController::provideAllowedPostures ( void * ctrlr )

static

Provides the string of space or comma-delimited names of.

tactical postures that jamming can be used in.

static DtSimComponent* DtJammerController::creator	(	const DtString &	name,
		DtVrfObject *	owner,
		DtSimManager *	simManager,
		DtComponentDescriptor *	desc = `0`,
		DtReaderWriterRegistry *	parentRegistry = `0`
	)

static

Parameters

name	Reader writer name of this component.
owner	The DtVrfObject that owns this component
simManager	The simulation manager (provides access to terrain, message interface, simulation clock).
desc	The component descriptor used to initialize this component.
parentRegistry	Pointer to the parent reader writer registry (the containing object that reads/writes this object).

Returns: New instance of this class.

virtual void DtJammerController::setOn ( bool onOff )

virtual

When true, EM Emissions PDUs are published.

virtual bool DtJammerController::on ( ) const

virtual

virtual void DtJammerController::setMountLocation ( const DtVector & location )

virtual

virtual DtVector DtJammerController::mountLocation ( ) const

virtual

virtual void DtJammerController::setSystemNameEnum ( DtEmitterSysName nameEnum )

virtual

virtual DtEmitterSysName DtJammerController::systemNameEnum ( ) const

virtual

virtual void DtJammerController::setSystemFunction ( DtEmissionFunc functionEnum )

virtual

virtual DtEmissionFunc DtJammerController::systemFunction ( ) const

virtual

virtual DtVrfEmitterSystem* DtJammerController::emitterSystem ( )

virtual

Returns the DtVrfEmitterSystem that is implementing the publishing of emitter beams.

When possible, use the other interface methods in this component instead of calling down to the emitter system directly.

virtual void DtJammerController::enable ( )

virtual

Is this component enabled or not.

If enabled, component's tick function will be called, otherwise it will not. Default is true (enabled).

Reimplemented from DtSimComponent.

virtual void DtJammerController::disable ( )

virtual

disable of this controller will delete the associated VRL publisher.

Reimplemented from DtSimComponent.

virtual bool DtJammerController::createAndInitEmitterSystem ( )

protectedvirtual

Creates a new DtVrfEmitterSystem and assigns it to myEmitterSystem.

virtual void DtJammerController::updateFromDescriptor ( )

protectedvirtual

copies data from this components descriptor into the state repository.

virtual DtList* DtJammerController::beamList ( )

protectedvirtual

Returns list to the beam repositories.

static void DtJammerController::setEmitterRequestCallback	(	DtSimMessage *	msg,
		void *	usrData
	)

staticprotected

Handle setEmitter (on/off)Static callback method for setEmitter messages.

Calls processSetEmitterRequestMessage().

virtual void DtJammerController::processSetEmitterRequestMessage ( DtSimMessage * msg )

protectedvirtual

Calls setEmitterSystemOn() with the value specified in the message if the message matches our emitter system ID.

static void DtJammerController::requestRadarModesAdminCallback	(	const DtVrfObjectMessage *	msg,
		void *	usr
	)

staticprotected

Handle requestRadarModes.

The jammer doesn't (currently) have settable modes; it does indicate either radar or comms jamming. This will also enable the info panel in the GUI to display beam information.

void DtJammerController::processRequestRadarModesAdmin	(	const DtUUID &	receiver,
		const DtUUID &	sender,
		const DtVrfObjectMessage *	msg
	)

protected

virtual bool DtJammerController::createPSR ( )

protectedvirtual

Creates myProcessState data member, and adds it to our process state repository manager.

Passes in the name and type specified in the component descriptor (if they exist) to the DtVrfProcessStateRepository::createRepository factory method. If name and/or type is not specified, uses the appropriate default strings defined in procSRTypes.h.

virtual const DtJammerEmitterDescriptor* DtJammerController::getDescriptor ( )

protectedvirtual

Gets the descriptor for use in the provider functions.

virtual DtJammerPSR* DtJammerController::getPSR ( )

protectedvirtual

Gets the PSR for use in the provider functions.

Member Data Documentation

DtJammerPSR* DtJammerController::myProcessState

protected

const DtJammerEmitterDescriptor* DtJammerController::myDescriptor

protected

DtVrfEmitterSystem* DtJammerController::myEmitterSystem

protected

Local copies of the emitter information.

Not saved in the PSR, but restored on scenario reload.

bool DtJammerController::myStateRestored

protected

Set to true once previously checkpointed state (if any) is restored.

DtU8 DtJammerController::myEmitterSystemId

protected

The documentation for this class was generated from the following file:

/data/exports/nrhent7-1/nightly/docs/vrForces.vrf4-8-branch/include/vrfmodel/jammerController.h

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Private Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation