Model instance to draw a EllipsoidArc. More...

Inheritance diagram for makVrv::DtAttachableEllipsoidArcModelInstance:

Classes
struct	EllipsoidArcRange
	Simple struct for storing an arc range (center/sweep) More...

struct	SphericalQuad
	Structure to hold a quad in spherical coordinates during geometry construction. More...

struct	SphericalVertex
	Structure to hold a vertex in spherical coordinates during geometry construction. More...

struct	Triangle
	Structure to hold triangles in spherical coordinates while building the geometry. More...

struct	VertexCache
	Caches the cartesian version of spherical vertices and their normals into the specified arrays. More...

Public Member Functions
virtual void	updateGeometry ()
	Builds the geometry using the defined parameters in myParameters Updates the vertices and faces used to render the ellipsoid arc model then updates the geometry's colors. More...

Inherited Methods
	DtAttachableEllipsoidArcModelInstance (DtDe &de)
	CTOR Instantiates a new DtAttachableEllipsoidArcModelInstance. More...

virtual	~DtAttachableEllipsoidArcModelInstance ()
	Virtual DTOR (no-op) (OSG manages created scene objects) More...

virtual void	addToConnector (DtOsgSceneConnector *connector)
	Tell the model instance to add itself to the provided node. More...

virtual bool	removeFromConnector (DtOsgSceneConnector *connector)
	Tell the model instance to remove itself from the provided node. More...

virtual bool	realize (DtModelDefinition &definition)
	Attempt to realize a definition. More...

virtual void	setVisible (bool isVisible)
	no-op More...

Setters
virtual void	setRelativePosition (double x, double y, double z)
	Set the relative position of the ellipsoid Sets the position of the model instance relative to the parent node. More...

virtual void	setOrientation (double yaw, double pitch, double roll)
	Set the relative orientation of the ellipsoid Sets the orientation of the model instance relative to the parent node. More...

virtual void	setDimensions (double x, double y, double z)
	Set the lengths of the ellipsoid's axes Sets the length of the ellipsoid's axes. More...

virtual void	setColor (float r, float g, float b, float a)
	Sets both the inside and outside colors Sets the color of the entire ellipsoid arc. More...

virtual void	setInsideColor (float r, float g, float b, float a)
	Sets the color of the center point of the sphere Sets the inner color of the ellipsoid arc Note: This color is not visible if the ellipsoid is a full ellipse (as there is no center vertex) More...

virtual void	setOutsideColor (float r, float g, float b, float a)
	Sets the color of the outer points on the sphere Sets the outer color of the ellipsoid arc. More...

virtual void	setAzimuthRange (float azimuthCenter, float azimuthSweep)
	Set the azimuth range of the ellipsoid arc Sets the ellipsoid arc's azimuth range. More...

virtual void	setElevationRange (float elevationCenter, float elevationSweep)
	Set the elevation range of the ellipsoid arc Sets the ellipsoid arc's elevation range. More...

virtual void	setMaxAngleSegment (float angleSegmentMax)
	Set the max angle segment used when building the geometry Sets the max angle segment between sample points along the azimuth/elevation when generating the geometry. More...

virtual void	setShowLines (bool showLines)
	Set whether the wireframe outlines are visible on the geometry Sets whether the wireframe lines for the ellipsoid arc should be drawn If set, the wireframe lines are drawn in addition to the geometry faces. More...

virtual void	setLinesHaveAlpha (bool lineAlpha)
	Set whether the wireframe outlines should be rendered with alpha Sets whether the alpha component of the ellipsoid's colors should apply to the wireframe outlines as well as the faces, or just to the faces. More...

Public Member Functions inherited from makVrv::DtOsgModelInstance
virtual	~DtOsgModelInstance ()
	DTOR. More...

virtual bool	cloneInstance (DtModelDefinition &definition)
	Attempt to clone the basic geometry. More...

virtual bool	saveModelToFile (const std::string &filename) const
	Attempt to save the model to a file. More...

virtual void	enableColorBlending (bool b)
	Enable / disable coloring on all models in the scene object Note about enableColorBlending: If this particular model has instancing enabled then this flag is set to false and color blending is handled by the instance manager. More...

virtual void	setBlendColor (float r, float g, float b, float a)
	set the model's color More...

virtual void	enableTexture (bool onOff)

virtual osg::Node *	rootNode ()
	Get the model instance's root node. More...

virtual const osg::Node *	rootNode () const

virtual osg::Node *	sensorNode ()
	Get the model instance's sensor node, . More...

virtual const osg::Node *	sensorNode () const

virtual void	addDynamicSensorRegion (const std::string &region)
	Add an active region state. More...

virtual void	setDynamicSensorRegion (const std::string &region, bool state)
	Set the state of an active region. More...

virtual bool	dynamicSensorRegion (const std::string &region)
	Get the current state of the specified sensor region. More...

SensorRegionStateMap const	dynamicSensorRegionMap () const
	Get the map containing all regions and their current states. More...

virtual void	slot_atcGlobalModelEnableChanged ()
	Slot to handle the global alpha to coverage signal for entities. More...

virtual bool	alphaToCoverageEnabled ()
	Get the current setting for alpha to coverage for this model. More...

virtual void	registerLightPoints (const std::string &groupName, bool daylightControlledLights)
	loop over all this models light points and register them with the light point manager daylightControlled is only used if the light points do not already have a type specified More...

Public Member Functions inherited from makVrv::DtModelInstance
	DtModelInstance (DtDe &de)
	CTOR. More...

virtual	~DtModelInstance ()
	DTOR. More...

const std::string &	realizedDefinitionName () const
	Get the name of the definition that this model instance was realized with. More...

const DtVector &	boundingBoxExtents () const
	Get the bounding box extents of the model instance. More...

void	getBoundingBoxExtents (double &x, double &y, double &z) const
	Get the bounding box extents of the model instance. More...

const DtVector &	boundingBoxCenter () const
	Get the bounding box center of the model instance. More...

void	getBoundingBoxCenter (double &x, double &y, double &z) const
	Get the bounding box center of the model instance. More...

void	getBoundingBoxComponents (DtVector &minimum, DtVector &maximum)
	Get the bounding box min/max of the model instance. More...

const DtVector &	allGeometryboundingBoxExtents () const
	functions for getting the allGeometry versions of the extents (they are calculated by traversing as if all switch paths are active) More...

void	getAllGeometryBoundingBoxExtents (double &x, double &y, double &z) const
	Get the all geometry version of bounding box extents of the model instance. More...

const DtVector &	allGeometryboundingBoxCenter () const
	Get the all geometry version of bounding box center of the model instance. More...

void	getAllGeometryBoundingBoxCenter (double &x, double &y, double &z) const
	Get the all geometry version of bounding box center of the model instance. More...

void	getAllGeometryBoundingBoxComponents (DtVector &minimum, DtVector &maximum)
	Get the all geometry version of bounding box min/max of the model instance. More...

virtual void	setContributesToBound (bool trueOrFalse)
	Set whether this model instance contributes to an object's overall bounding volume. More...

bool	contributesToBound () const
	Get whether this model instance contributes to an object's overall bounding volume. More...

Protected Member Functions
Updaters
virtual void	updateGeometryColors ()
	Updates the color(s) of the sphere Updates the colors of the vertices on the ellipsoid arc model's geometry Called if any of the following methods are called: More...

virtual void	updateGeometryWireframeState ()
	Updates the state of the geometry's wireframe Updates the visibility / alpha state of the geometry's wireframe Called if any of the following methods are called: More...

virtual void	updateGeometryTransforms ()
	Updates the scaling and location applied to the sphere Updates the scaling applied to the model (the ellipsoid arc model's dimensions) Called if any of the following methods are called: More...

Vertex Utilities
double	angularDistance (double from, double to)
	Computes the distance between two angles Computes the angle between two reference angles Counts in the clockwise direction. More...

Protected Member Functions inherited from makVrv::DtOsgModelInstance
virtual void	updateColorBlending ()
	calls update color blending with the model root. More...

virtual void	updateColorBlending (osg::Node *node)

virtual void	enableTexture (osg::Node *root, bool onOff)

virtual void	updateBoundingBoxViaContents ()

	DtOsgModelInstance (DtDe &de)
	CTOR. More...

virtual void	setRootNode (osg::Node *node)
	Set the model instance's root node. More...

Protected Attributes
osg::ref_ptr < osg::MatrixTransform >	myTransform
	The offset and scale transform. More...

osg::ref_ptr< osg::Group >	myBlendNode
	The blending node for the geometry. More...

osg::ref_ptr< osg::Group >	myWireNode
	The wireframe node for the geometry. More...

osg::ref_ptr< osg::Geometry >	myGeometry
	The model instance's geometry. More...

osg::ref_ptr< osg::Geode >	myFrontGeode
	The front facing geometry geode. More...

osg::ref_ptr< osg::Geode >	myBackGeode
	The back facing geometry geode. More...

int	myCenterVertexIndex

osg::Vec3d	myRelativePosition
	Relative position offset. More...

osg::Quat	myRelativeOrientation
	Relative orientation. More...

osg::Vec3d	myDimensions
	Axis dimensions. More...

EllipsoidArcRange	myAzimuthRange
	Azimuth range (center/sweep) More...

EllipsoidArcRange	myElevationRange
	Elevation range (center/sweep) More...

osg::Vec4	myInsideColor
	Color at the center of the sphere. More...

osg::Vec4	myOutsideColor
	Color on the external points of the sphere. More...

bool	myShowLines
	Whether or not to display the emitter volume outline lines. More...

bool	myLineAlphaFlag
	Whether the outline lines have alpha or not. More...

float	myAngleSegmentMax
	The max angle used to sample the emitter volume (in degrees) More...

bool	myFlashing
	Like HTML blink. More...

Protected Attributes inherited from makVrv::DtOsgModelInstance
osg::ref_ptr< osg::Node >	myModelRoot

osg::ref_ptr< osg::StateSet >	myCachedState

SensorRegionStateMap	mySensorRegionMap

AlphaToCoverageState	myAlphaToCoverageState

DtSignalConnectionManager	myConnections

bool	myModelInstanceShaderSet
	Has this model instance had a shader generated for it? Used for classes (ex. More...

Protected Attributes inherited from makVrv::DtModelInstance
DtDe &	myDe

std::string	myRealizedModelDefinitionName

DtVector	myBoundingBoxCenter

DtVector	myBoundingBoxExtents

DtVector	myBoundingBoxMinimum

DtVector	myBoundingBoxMaximum

DtVector	myAllGeometryBoundingBoxCenter

DtVector	myAllGeometryBoundingBoxExtents

DtVector	myAllGeometryBoundingBoxMinimum

DtVector	myAllGeometryBoundingBoxMaximum

bool	myContributesToBound

bool	myColorBlendingEnabled

float	myBlendRed

float	myBlendBlue

float	myBlendGreen

float	myBlendAlpha

Additional Inherited Members
Public Types inherited from makVrv::DtOsgModelInstance
enum	AlphaToCoverageState { USE_GLOBAL, FORCE_OFF, FORCE_ON }
	The possible states of a control point. More...

typedef boost::unordered_map < std::string, bool >	SensorRegionStateMap
	Dynamic Sensor Region methods. More...

Static Public Member Functions inherited from makVrv::DtOsgModelInstance
static osg::Vec4	readVec4 (const std::string &paramName, const DtModelDefinition &definition, const osg::Vec4 &initValue=osg::Vec4(1, 1, 1, 1))

static osg::Vec3	readVec3 (const std::string &paramName, const DtModelDefinition &definition, const osg::Vec3 &initValue=osg::Vec3(1, 1, 1))

Static Public Member Functions inherited from makVrv::DtModelInstance
static float	readFloat (const std::string &paramName, const DtModelDefinition &definition)

static DtVector	readVector (const std::string &paramName, const DtModelDefinition &definition)

Public Attributes inherited from makVrv::DtOsgModelInstance
boost::signal< void(const std::string &) >	signal_dynamicSensorRegionAdded
	Signal raised when a dynamic sensor region is added. More...

boost::signal< void(const std::string &, bool) >	signal_dynamicSensorRegionChanged
	Signal raised when a dynamic sensor region's state changes. More...

boost::signal< void(bool)>	signal_atcModeEnableChanged
	Signal raised when alpha to coverage for this model is changed. More...

Public Attributes inherited from makVrv::DtModelInstance
boost::signal< void(DtModelInstance *)>	signal_modelInstanceChanged

Detailed Description

Model instance to draw a EllipsoidArc.

Constructor & Destructor Documentation

makVrv::DtAttachableEllipsoidArcModelInstance::DtAttachableEllipsoidArcModelInstance ( DtDe & de )

CTOR Instantiates a new DtAttachableEllipsoidArcModelInstance.

See Also: makVrv::DtOsgModelInstance::DtOsgModelInstance( DtDe& )

virtual makVrv::DtAttachableEllipsoidArcModelInstance::~DtAttachableEllipsoidArcModelInstance ( )

virtual

Virtual DTOR (no-op) (OSG manages created scene objects)

Member Function Documentation

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::addToConnector ( DtOsgSceneConnector * connector )

virtual

Tell the model instance to add itself to the provided node.

See Also: makVrv::DtOsgModelInstance::addToConnector( DtOsgSceneConnector* )

Reimplemented from makVrv::DtOsgModelInstance.

virtual bool makVrv::DtAttachableEllipsoidArcModelInstance::removeFromConnector ( DtOsgSceneConnector * connector )

virtual

Tell the model instance to remove itself from the provided node.

See Also: makVrv::DtOsgModelInstance::removeFromConnector( DtOsgSceneConnector* )

Reimplemented from makVrv::DtOsgModelInstance.

virtual bool makVrv::DtAttachableEllipsoidArcModelInstance::realize ( DtModelDefinition & definition )

virtual

Attempt to realize a definition.

See Also: makVrv::DtModelInstance::realize( DtModelDefinition& )

Reimplemented from makVrv::DtOsgModelInstance.

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setVisible ( bool isVisible )

inlinevirtual

no-op

See Also: DtModelInstance::setVisible( bool )

Implements makVrv::DtModelInstance.

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setRelativePosition	(	double	x,
		double	y,
		double	z
	)

virtual

Set the relative position of the ellipsoid Sets the position of the model instance relative to the parent node.

Parameters

x	the relative x translation
y	the relative y translation
z	the relative z translation

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setOrientation	(	double	yaw,
		double	pitch,
		double	roll
	)

virtual

Set the relative orientation of the ellipsoid Sets the orientation of the model instance relative to the parent node.

Parameters

yaw	the yaw, -DtTaitBryan::psi()
pitch	the pitch, DtTaitBryan::theta()
roll	the roll, DtTaitBryan::phi()

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setDimensions	(	double	x,
		double	y,
		double	z
	)

virtual

Set the lengths of the ellipsoid's axes Sets the length of the ellipsoid's axes.

Parameters

x	the length of the ellipsoid's x axis
y	the length of the ellipsoid's y axis
z	the length of the ellipsoid's z axis

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setColor	(	float	r,
		float	g,
		float	b,
		float	a
	)

virtual

Sets both the inside and outside colors Sets the color of the entire ellipsoid arc.

Parameters

r	the red component of the color
g	the green component of the color
b	the blue component of the color
a	the alpha component of the color

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setInsideColor	(	float	r,
		float	g,
		float	b,
		float	a
	)

virtual

Sets the color of the center point of the sphere Sets the inner color of the ellipsoid arc Note: This color is not visible if the ellipsoid is a full ellipse (as there is no center vertex)

Parameters

r	the red component of the color
g	the green component of the color
b	the blue component of the color
a	the alpha component of the color

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setOutsideColor	(	float	r,
		float	g,
		float	b,
		float	a
	)

virtual

Sets the color of the outer points on the sphere Sets the outer color of the ellipsoid arc.

Parameters

r	the red component of the color
g	the green component of the color
b	the blue component of the color
a	the alpha component of the color

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setAzimuthRange	(	float	azimuthCenter,
		float	azimuthSweep
	)

virtual

Set the azimuth range of the ellipsoid arc Sets the ellipsoid arc's azimuth range.

Parameters

azimuthCenter	the angle of the center of the azimuth's range
azimuthSweep	the angle from the center to the ends of the azimuth range

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setElevationRange	(	float	elevationCenter,
		float	elevationSweep
	)

virtual

Set the elevation range of the ellipsoid arc Sets the ellipsoid arc's elevation range.

Parameters

elevationCenter	the angle of the center of the elevation's range
elevationSweep	the angle from the center to the ends of the elevation range

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setMaxAngleSegment ( float angleSegmentMax )

virtual

Set the max angle segment used when building the geometry Sets the max angle segment between sample points along the azimuth/elevation when generating the geometry.

Parameters

angleSegmentMax the max angle segment between sample points

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setShowLines ( bool showLines )

virtual

Set whether the wireframe outlines are visible on the geometry Sets whether the wireframe lines for the ellipsoid arc should be drawn If set, the wireframe lines are drawn in addition to the geometry faces.

Parameters

showLines whether the lines should be visible or hidden

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::setLinesHaveAlpha ( bool lineAlpha )

virtual

Set whether the wireframe outlines should be rendered with alpha Sets whether the alpha component of the ellipsoid's colors should apply to the wireframe outlines as well as the faces, or just to the faces.

Parameters

whether the lines should be affected by the color's alpha values.

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::updateGeometry ( )

virtual

Builds the geometry using the defined parameters in myParameters Updates the vertices and faces used to render the ellipsoid arc model then updates the geometry's colors.

Called if any of the following methods are called:

See Also: makVrv::DtAttachableEllipsoidArcModelInstance::updateGeometryColors()

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::updateGeometryColors ( )

protectedvirtual

Updates the color(s) of the sphere Updates the colors of the vertices on the ellipsoid arc model's geometry Called if any of the following methods are called:

See Also: makVrv::DtAttachableEllipsoidArcModelInstance::updateGeometry()

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::updateGeometryWireframeState ( )

protectedvirtual

Updates the state of the geometry's wireframe Updates the visibility / alpha state of the geometry's wireframe Called if any of the following methods are called:

virtual void makVrv::DtAttachableEllipsoidArcModelInstance::updateGeometryTransforms ( )

protectedvirtual

Updates the scaling and location applied to the sphere Updates the scaling applied to the model (the ellipsoid arc model's dimensions) Called if any of the following methods are called:

double makVrv::DtAttachableEllipsoidArcModelInstance::angularDistance	(	double	from,
		double	to
	)

protected

Computes the distance between two angles Computes the angle between two reference angles Counts in the clockwise direction.

Parameters

from	the first reference angle
to	the second reference angle

Member Data Documentation

osg::ref_ptr<osg::MatrixTransform> makVrv::DtAttachableEllipsoidArcModelInstance::myTransform

protected

The offset and scale transform.

osg::ref_ptr<osg::Group> makVrv::DtAttachableEllipsoidArcModelInstance::myBlendNode

protected

The blending node for the geometry.

osg::ref_ptr<osg::Group> makVrv::DtAttachableEllipsoidArcModelInstance::myWireNode

protected

The wireframe node for the geometry.

osg::ref_ptr<osg::Geometry> makVrv::DtAttachableEllipsoidArcModelInstance::myGeometry

protected

The model instance's geometry.

osg::ref_ptr<osg::Geode> makVrv::DtAttachableEllipsoidArcModelInstance::myFrontGeode

protected

The front facing geometry geode.

osg::ref_ptr<osg::Geode> makVrv::DtAttachableEllipsoidArcModelInstance::myBackGeode

protected

The back facing geometry geode.

int makVrv::DtAttachableEllipsoidArcModelInstance::myCenterVertexIndex

protected

osg::Vec3d makVrv::DtAttachableEllipsoidArcModelInstance::myRelativePosition

protected

Relative position offset.

osg::Quat makVrv::DtAttachableEllipsoidArcModelInstance::myRelativeOrientation

protected

Relative orientation.

osg::Vec3d makVrv::DtAttachableEllipsoidArcModelInstance::myDimensions

protected

Axis dimensions.

EllipsoidArcRange makVrv::DtAttachableEllipsoidArcModelInstance::myAzimuthRange

protected

Azimuth range (center/sweep)

EllipsoidArcRange makVrv::DtAttachableEllipsoidArcModelInstance::myElevationRange

protected

Elevation range (center/sweep)

osg::Vec4 makVrv::DtAttachableEllipsoidArcModelInstance::myInsideColor

protected

Color at the center of the sphere.

osg::Vec4 makVrv::DtAttachableEllipsoidArcModelInstance::myOutsideColor

protected

Color on the external points of the sphere.

bool makVrv::DtAttachableEllipsoidArcModelInstance::myShowLines

protected

Whether or not to display the emitter volume outline lines.

bool makVrv::DtAttachableEllipsoidArcModelInstance::myLineAlphaFlag

protected

Whether the outline lines have alpha or not.

float makVrv::DtAttachableEllipsoidArcModelInstance::myAngleSegmentMax

protected

The max angle used to sample the emitter volume (in degrees)

bool makVrv::DtAttachableEllipsoidArcModelInstance::myFlashing

protected

Like HTML blink.

The documentation for this class was generated from the following file:

/data/exports/nrhent7-1/nightly/docs/vrForces.vrf4-8-branch/include/vrvOsg/DtAttachableEllipsoidArcModelInstance.h

Classes

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation