|
| | DtRotaryWingMoveAlongControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) |
| |
| virtual | ~DtRotaryWingMoveAlongControllerComponent () |
| | destructor More...
|
| |
| virtual bool | init () |
| | Creates the route state. More...
|
| |
| virtual void | tick () |
| | Calculate new control values. More...
|
| |
| virtual const char * | type () const |
| | Returns a string identifies the class type of component. More...
|
| |
| virtual DtSimTaskStatePtr | currentTaskState () const |
| |
| virtual void | registerTaskMsgCallbacks () |
| | Overrides this so it can register its interest in MoveAlong commands. More...
|
| |
| virtual void | processRouteChanged (const DtVrfObject *obj) |
| |
| virtual bool | setupRoute () |
| | Looks up the route using the route name. More...
|
| |
| virtual bool | isMovingToward (const DtVector &ENUpoint) |
| | Returns true if the entity is moving toward ENUpoint, otherwise it returns false. More...
|
| |
| virtual void | routeLogic () |
| | Sets control values based on status along the route. More...
|
| |
| virtual void | desiredVelocityAndPosition () |
| | Calculates the desired position and velocity vectors that guide the helicopter along the route. More...
|
| |
| | DtRotaryWingTaskController (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) |
| |
| virtual | ~DtRotaryWingTaskController () |
| | destructor More...
|
| |
| virtual void | setDesiredPosition (const DtVector &pos) |
| | Sets the specified value into the corresponding output port after doing a check to make sure the port was created. More...
|
| |
| virtual void | setContinueMovement (const bool continueAtEnd) |
| |
| virtual void | setDesiredVelocity (const DtVector &vel) |
| |
| virtual void | setDesiredAcceleration (const DtVector &accel) |
| |
| virtual void | setDesiredHeading (double heading) |
| |
| virtual void | setPositionSelector (double sel) |
| |
| virtual void | setVelocitySelector (double sel) |
| |
| virtual void | setAccelerationSelector (double sel) |
| |
| virtual void | setHeadingSelector (double sel) |
| |
| virtual void | setAggressiveness (double agg) |
| |
| virtual void | setPowerDown (bool powerDown) |
| |
| virtual DtVectorOutputPort * | desiredPositionPort () |
| |
| virtual DtVectorOutputPort * | desiredVelocityPort () |
| |
| virtual DtVectorOutputPort * | desiredAccelerationPort () |
| |
| virtual DtAnalogOutputPort * | desiredHeadingPort () |
| |
| virtual DtAnalogOutputPort * | positionSelectorPort () |
| |
| virtual DtBooleanOutputPort * | continueMovementPort () |
| |
| virtual DtAnalogOutputPort * | velocitySelectorPort () |
| |
| virtual DtAnalogOutputPort * | accelerationSelectorPort () |
| |
| virtual DtAnalogOutputPort * | headingSelectorPort () |
| |
| virtual DtAnalogOutputPort * | aggressivenessPort () |
| |
| virtual DtBooleanOutputPort * | powerDownPort () |
| |
| | DtSingleTaskControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *compDesc=0, DtReaderWriterRegistry *parentRegistry=0) |
| |
| virtual | ~DtSingleTaskControllerComponent () |
| | destructor More...
|
| |
| virtual void | postTick () |
| | Override to check if we're tasked and we want to give up (only performs the check if we're in play mode (dT() > 0)). More...
|
| |
| virtual bool | beginProcessingTask (const DtTaskMessage &task, DtSimTaskStatePtr taskState) |
| | Called by the task manager when this controller should start executing the specified task. More...
|
| |
| virtual void | taskNotify (const DtSimTask &task) |
| | This is called to let us know when some other component receives a task In the case of this component, we don't care what the task actually is. More...
|
| |
| virtual void | taskComplete (bool success=true) |
| | If we are currently tasked, this will cause us to notify the entity that we're done and delete the task. More...
|
| |
| virtual void | suspendTask () |
| | This method is called when the currently running task is being suspended. More...
|
| |
| virtual int | sendSubtask (DtSimTask &task) |
| | Sends subtask to ourself. More...
|
| |
| virtual void | clearSubtask (int subtaskId) |
| | Clears subtask with the given subtaskId (subtaskId is returned sendSubtask()). More...
|
| |
| virtual void | addPendingSubtaskId (int subtaskId) |
| | Adds given subtask Id to list of pending subtasks. More...
|
| |
| virtual bool | findPendingSubtaskId (int subtaskId) |
| | Checks to see if given subtaskId exists in our list of pending subtasks. More...
|
| |
| virtual bool | isSubtasked () const |
| | Returns true if this controller is currently subtasked. More...
|
| |
| virtual void | removePendingSubtaskId (int subtaskId) |
| | Removes pending subtask from list of subtasks for this component. More...
|
| |
| virtual void | removeAllPendingSubtaskIds () |
| | Clear all pending subtasks from our list of subtasks. More...
|
| |
| virtual std::vector< int > | currentPendingSubstaskIds () const |
| | Returns the list of all currently pending subtask ids for this controller. More...
|
| |
| virtual void | clearCurrentTaskMessage () |
| | Returns the current subtask with the specified id. More...
|
| |
| virtual DtTaskMessage * | currentTaskMessage () const |
| | Get a pointer to the message that was used to task this entity. More...
|
| |
| virtual bool | decideToGiveUpTask () const |
| | This function is used to determine if the controller should give up trying to execute the current task. More...
|
| |
| virtual void | giveUpTask () |
| | Called when controller is tasked and decideToGiveUp() returns true. More...
|
| |
| virtual bool | taskActive (int taskId) const |
| |
| virtual bool | clearTopLevelTasks () |
| | If this controller has any top level tasks (not subtasks), they are cleared. More...
|
| |
| virtual void | clearConflictingTopLevelTasks (const DtSimTaskMessageType &conflictType) |
| | Clears any top level tasks on this controller that conflict with the conflict task type. More...
|
| |
| virtual void | clearTasksByType (const DtSimTaskMessageType &taskType) |
| | Clears any tasks of the specified type running in this controller. More...
|
| |
| virtual void | clearTaskById (int taskId) |
| | Clears any task of the specified ID running in this controller. More...
|
| |
| virtual DtSuspendedTaskInfo * | suspendTaskById (int taskId) |
| |
| virtual DtSuspendedTaskInfo * | suspendSubtaskById (int taskId, int subtaskId) |
| |
virtual std::list
< DtTaskMessage * > | currentTaskMessages () const |
| |
| virtual DtTaskWithTaskStateListPtr | topLevelTasks () const |
| |
| virtual void | disable () |
| | Overridden to allow tasks controllers that can be disabled to call task complete. More...
|
| |
| | DtTaskControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *compDesc=0, DtReaderWriterRegistry *parentRegistry=0) |
| |
| virtual | ~DtTaskControllerComponent () |
| | destructor More...
|
| |
| virtual bool | showCurrentTaskInGui () const |
| |
| virtual void | setRadio (DtSimRadio *radio) |
| | Calls registerTaskMsgCallbacks. More...
|
| |
| virtual void | addTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtTaskMessageCallbackFcn fcn, void *usr) |
| | Adds a new function for processing the specified task type. More...
|
| |
| virtual void | addTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtMessageCallbackFcn fcn, void *usr) |
| | Deprecated form of addTaskProcessorCallback. More...
|
| |
| virtual void | removeTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtMessageCallbackFcn fcn, void *usr) |
| | Undoes anything done by addTaskProcessorCallback(). More...
|
| |
| virtual void | removeTaskProcessorCallback (const DtSimTaskMessageType &taskType, DtTaskMessageCallbackFcn fcn, void *usr) |
| | Deprecated form of removeTaskProcessorCallback. More...
|
| |
| virtual void | enable () |
| | Overridden to call registerTaskMsgCallbacks(). More...
|
| |
| virtual void | sendTaskCanceled (DtTaskMessage *taskMsg) |
| | Sends the task canceled report for the specified message. More...
|
| |
| virtual bool | taskVisualizationsActive () const |
| | Returns true if task visualizations are currently active for this component. More...
|
| |
| virtual void | setTasked (bool tasked) |
| | The current tasked state of this controller. More...
|
| |
| virtual bool | tasked () const |
| |
| | DtControllerComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) |
| |
| virtual | ~DtControllerComponent () |
| | destructor More...
|
| |
| virtual DtSimRadio * | radio () |
| | The radio this component is listening to. More...
|
| |
| | DtSimComponent (const DtString &name, DtVrfObject *owner, DtSimManager *simManager, DtComponentDescriptor *desc=0, DtReaderWriterRegistry *parentRegistry=0) |
| |
| virtual | ~DtSimComponent () |
| | destructor More...
|
| |
| virtual void | setParentSystem (DtComponentSystem *system) |
| | Sets the parent system of this component. More...
|
| |
| DtComponentSystem * | parentSystem () const |
| |
| virtual void | registerAttributeFunctions () |
| | Called to register functions that provide system attribute values. More...
|
| |
| virtual void | preFirstTickInit () |
| | This function can be overridden to initialize a component before it is ticked for the first time. More...
|
| |
| virtual void | timedTick () |
| | This version of tick checks to see if the time to tick has arrived. More...
|
| |
| virtual void | setMinTickPeriod (double minTickPeriod) |
| | specifies a minimum tick period (which can also be thought of as More...
|
| |
| virtual double | minTickPeriod () const |
| | access the minimum tick period More...
|
| |
| virtual void | setMinTickPeriodVariance (double minTickPeriodVariance) |
| | set the variance in the minimum tick time More...
|
| |
| virtual double | minTickPeriodVariance () const |
| | access the variance in the minimum tick period More...
|
| |
| virtual void | setNextTickTime (double nextTickTime) |
| | The next tick time is normally calculated internally. More...
|
| |
| virtual double | nextTickTime () const |
| | access the next tick time More...
|
| |
| virtual double | calculateNextTickTime () const |
| | The next tick time is equal to mySimManager->exerciseClock()-> approximateElapsedRealTime() + myMinTickPeriod + a random # between -myMinTickPeriodVariance/2. More...
|
| |
| virtual double | calculateFirstTickTime () const |
| | Returns the first time value that the component should tick at. More...
|
| |
| virtual void | setEntity (DtVrfObject *entity) |
| | The entity's state repository is the place that actuator components make updates and other components look to see our current state. More...
|
| |
| virtual DtSimComponent * | nextComponent () |
| | List management functions. More...
|
| |
| virtual DtSimComponent * | prevComponent () |
| |
| virtual void | setListItem (DtListItem *item) |
| | Used by DtComponentList. More...
|
| |
| virtual DtListItem * | listItem () |
| |
| virtual void | putData (std::string &fp, int indentLevel=0) |
| | putData writes our type, which is provided by the virtual type accessor of the deriving class. More...
|
| |
| virtual DtlObjPtr | getData (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths, const DtVariableBindingsList &variableBindings) |
| | getData is just used to get us past the type in the data stream, since it's not actual stored. More...
|
| |
| virtual void | addInputPort (DtInputPort *port) |
| | Adds this input port to the components input port list so that other components can look it up and attach to it. More...
|
| |
| virtual void | removeInputPort (DtInputPort *port) |
| |
| virtual DtInputPort * | lookupInputPort (const DtString &portName) |
| | Returns a pointer to the input port registered on this component with the specified name. More...
|
| |
| virtual DtList | inputPortList () const |
| | Returns the list of DtInputPorts registered on this component. More...
|
| |
| virtual void | addOutputPort (DtOutputPort *port) |
| | Adds this output port to the components output port list so that other components can look it up and attach to it. More...
|
| |
| virtual void | removeOutputPort (DtOutputPort *port) |
| |
| virtual DtOutputPort * | lookupOutputPort (const DtString &portName) |
| | Returns a pointer to the output port registered on this component with the specified name. More...
|
| |
| virtual DtList | outputPortList () const |
| | Returns the list of DtOutputPorts registered on this component. More...
|
| |
| virtual void | addInputPortGroup (DtInputPortGroup *group) |
| | Adds this input port to the components input port list so that other components can look it up and attach to it. More...
|
| |
| virtual void | removeInputPortGroup (DtInputPortGroup *group) |
| |
| virtual DtInputPortGroup * | lookupInputPortGroup (const DtString &groupName) |
| | Returns a pointer the input port group registered on this component with the specified name. More...
|
| |
| virtual DtList | inputPortGroupList () const |
| | Returns the list of DtInputPortGroups registered on this component. More...
|
| |
| virtual void | addOutputPortGroup (DtOutputPortGroup *group) |
| | Adds this output port group to the components output port group list so that other components can look it up and attach to it. More...
|
| |
| virtual void | removeOutputPortGroup (DtOutputPortGroup *group) |
| |
| virtual DtOutputPortGroup * | lookupOutputPortGroup (const DtString &groupName) |
| | Returns a pointer the output port group registered on this component with the specified name. More...
|
| |
| virtual DtList | outputPortGroupList () const |
| | Returns the list of DtOutputPortGroups registered on this component. More...
|
| |
| virtual int | priority () const |
| | Return the current connection priority for this component. More...
|
| |
| virtual void | setPriority (int priority) |
| | Sets a new connection priority for this component, and changes all current outgoing connections from this component to the new value. More...
|
| |
| double | dT () const |
| | This is the delta-t for this component, which may or may not be the same as the exerciseClock dT. More...
|
| |
| virtual void | setDT (double deltaT) |
| | Note that while dT is calculated internally, this makes it possible to 'lie' to the component about dT if necessary. More...
|
| |
| virtual void | setComponentDescriptor (DtComponentDescriptor *componentDescriptor) |
| | The component descriptor specified in the order of battle file or parameter file that was used to create this component. More...
|
| |
virtual const
DtComponentDescriptor * | componentDescriptor () const |
| |
| virtual bool | tickWhileDestroyed () const |
| | If the component returns true here, it will be ticked regardless of the destroyed state of the host entity. More...
|
| |
| DtVrfProcessStateRepositoryManager * | psrManager () |
| |
| virtual const DtSymbolString & | componentFullName () const |
| |
| DtPhysicalWorld * | physicalWorld () |
| | Gets the physical world that this component's entity exists in. More...
|
| |
| const DtPhysicalWorld * | physicalWorld () const |
| |
| DtAttachedTerrain * | terrainAttachedTo () |
| | Gets the terrain that this component's entity is attached to, if any. More...
|
| |
| const DtAttachedTerrain * | terrainAttachedTo () const |
| |
| DtVrfObject * | entity () |
| | Gets the entity. More...
|
| |
| const DtVrfObject * | entity () const |
| |
| const DtVrfObject * | const_entity () const |
| | You would want to use this call if you could be either a const or non-const entity, and you wanted to be sure you only had const access. More...
|
| |
| DtSimManager * | simManager () |
| | Gets the sim manager. More...
|
| |
| const DtSimManager * | simManager () const |
| |
| const Coordinate_System * | coordinateSystem () const |
| | Gets the coordinate system, as it should always exist if the physical world is in a valid state! More...
|
| |
| DtVrfObjectStateRepository * | localStateRepository () |
| | Gets the local state repository. More...
|
| |
| const DtVrfObjectStateRepository * | localStateRepository () const |
| |
| const DtVrfObjectStateRepository * | const_localStateRepository () const |
| | You would want to use this call if you could be either a const or non-const local state repository, and you wanted to be sure you only had const access. More...
|
| |
| virtual DtTaskVisualizationMap & | taskVisualizations () |
| | Returns the list of task visualizations for this component. More...
|
| |
| virtual bool | taskVisualizationsEnabled () const |
| | Returns true if task visualizations are enabled for this component. More...
|
| |
| virtual bool | isThreadSafe () const |
| | Returns true if this component is marked as being thread safe. More...
|
| |
| virtual void | addVRLinkDeferredJob (const boost::function< void()> &callback) |
| | Adds a deferred job to the VRLink job queue in the DtParallelTickManager, but only if this component is marked at thread safe. More...
|
| |
| virtual bool | isEnabled () |
| |
| virtual void | setIsEnabled (bool yesNo) |
| |
| virtual DtOutputStream & | objectConsoleDebug (const DtString &channel="") const |
| |
| virtual DtOutputStream & | objectConsoleVerbose (const DtString &channel="") const |
| |
| virtual DtOutputStream & | objectConsoleInfo (const DtString &channel="") const |
| |
| virtual DtOutputStream & | objectConsoleWarn (const DtString &channel="") const |
| |
| virtual DtOutputStream & | objectConsoleError (const DtString &channel="") const |
| |
| virtual DtSimResourceManager & | resourceManager () |
| |
virtual const
DtSimResourceManager & | resourceManager () const |
| |
| | DtReaderWriter () |
| | default constructor More...
|
| |
| | DtReaderWriter (const DtString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false) |
| | real constructor Setting the readonly flag prevents object from writing itself to the stream. More...
|
| |
| | DtReaderWriter (const DtSymbolString &name, DtReaderWriterRegistry *parentRegistry=NULL, bool readonly=false) |
| |
| | DtReaderWriter (const DtString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL) |
| | pseudo-copy constructor More...
|
| |
| | DtReaderWriter (const DtSymbolString &name, const DtReaderWriter &orig, DtReaderWriterRegistry *parentRegistry=NULL) |
| |
| | DtReaderWriter (const DtReaderWriter &, DtReaderWriterRegistry *parentRegistry=NULL) |
| | copy constructor More...
|
| |
| const DtReaderWriter & | operator= (const DtReaderWriter &orig) |
| | assignment operator More...
|
| |
| bool | operator== (const DtReaderWriter &) const |
| | Equivalence operator. More...
|
| |
| bool | operator!= (const DtReaderWriter &rhs) |
| |
| virtual | ~DtReaderWriter () |
| | destructor More...
|
| |
| virtual void | putSelf (std::string &fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename()) |
| | Top level call to write itself to file. More...
|
| |
| virtual void | postPutSelf () |
| | Called after either version of put self (file or environment). Default is no-op. More...
|
| |
| virtual void | prePutSelf () |
| | Called before either version of put self (file or environment). Default is no-op. More...
|
| |
| virtual void | getSelf (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &variableBindings=nullVariableReference()) |
| | Top level to read itself from an input stream. More...
|
| |
| virtual void | postGetSelf () |
| | Called after either version of getSelf (mtl or environment). Default is no-op. More...
|
| |
| virtual void | preGetSelf () |
| | Called before either version of get self (file or environment). Default is no-op. More...
|
| |
| virtual void | writeSelf (std::string &fp, int indentLevel=0, bool writeUnspecified=false, const DtFilename &path=DtFilename::nullFilename()) |
| | Called from putSelf, calls myRegistry.putSelf which in turn calls putSelf on each reader/writer in the registry. More...
|
| |
| virtual DtSymbolString | name () const |
| | Accessor for name of this readable/writable object. More...
|
| |
| virtual void | addAlias (const DtSymbolString &alias) |
| | Add an alias as an alternative name for this object. More...
|
| |
| virtual void | addAlias (const DtString &alias) |
| |
| virtual bool | hasAlias (const DtSymbolString &alias) |
| |
| virtual const aliasContainer & | aliases () const |
| |
| virtual void | setReadonly (bool flag) |
| | Set read-only flag. More...
|
| |
| bool | isReadonly () const |
| |
| virtual void | reset () |
| | For those reader/writer items that support it, resets the reader/writer value to original state Default is no-op. More...
|
| |
| virtual int | alignment () const |
| | For those items that are sent over the network via HLA, this will give the network alignment. More...
|
| |
| virtual bool | variableIsBound () const |
| |
| virtual void | unbindVariable () |
| | Sets the myVariableIsBound flag to false. More...
|
| |
| virtual void | setName (const DtString &) |
| | Set the name of the object. More...
|
| |
| virtual const char * | readerWriterType () const |
| | Used to supply a string type that this reader writer type is. More...
|
| |
| virtual const char * | xmlType () const |
| |
| virtual DtString | prettyPrint () const |
| | Routine to return a human readable form of the reader/writer variable. More...
|
| |
| std::string | debugText () const |
| |
| virtual void | bindVariables (DtVariableBindingsList variableBindings) |
| | Runs a variable binding pass on this reader writer and any of its children. More...
|
| |
virtual std::list
< DtVariableNameType > | unboundVariables () const |
| |
| bool | invalid () const |
| |
| virtual bool | hasChild (const DtReaderWriter *p) const |
| | Returns true if this variable has a child p in it's chain. More...
|
| |
| virtual bool | hasVariableReference () const |
| | Returns true if this item or any item in the registry (recursive) is a variable reference. More...
|
| |
| virtual void | bindLocalVariables (const DtVariableBindingsList &variableBindings) |
| | Checks to see if this RW object is a variable reference that can be bound using the provided bindings. More...
|
| |
| virtual void | recordUpdateTime () const |
| | Can be implemented in subclasses to stamp the time when updated. More...
|
| |
| virtual bool | wasUpdatedSince (DtTime t) const |
| | Can be implemented in subclasses to return true if an update occurred after the specified time. More...
|
| |
| virtual bool | changedSinceLastChecked () |
| | Returns true if this objects value has changed since the last time this function was called. More...
|
| |
| virtual bool | peekChangedSinceLastChecked () const |
| | Returns the value that changedSinceLastChecked would return but does not reset the internal flag. More...
|
| |
| virtual void | setValueSpecified (bool specified, bool recurse=false) |
| | The specified flags are used for optional values. More...
|
| |
| virtual bool | valueSpecified () const |
| |
| virtual bool | isVariableReference () const |
| | Specifies whether or not this reader writer is really a variable that is specified elsewhere. More...
|
| |
| virtual void | setIsVariableReference (bool value) |
| |
| virtual void | clearAllVariableReferenceFlags () |
| | Clears out all variable reference flags from all readerwriter items in registry recursively. More...
|
| |
| virtual DtSymbolString | variableName () const |
| | The variable name, if this object is a variable reference. More...
|
| |
| virtual void | setVariableName (const DtSymbolString variableName) |
| |
| virtual const DtReaderWriter * | defaultRWValue () const |
| | The default value to use if the reader/writer object is a variable and that variable is not specified. More...
|
| |
| virtual DtReaderWriter * | defaultRWValue () |
| |
| virtual void | setDefaultRWValue (DtReaderWriter *) |
| | Previous default value, if exists, will be removed and replaced with a clone of the supplied variable. More...
|
| |
| virtual bool | checkAndSetDefaultRWValue (DtlObjPtr args, const DtReaderWriter::SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &variableBindings=nullVariableReference()) |
| | Give the stream, if the stream contains a default value then set it here. More...
|
| |
| const DtReaderWriterRegistry & | registry () const |
| | Collection of child DtReaderWriter nodes owned by this object. More...
|
| |
| DtReaderWriterRegistry & | registry () |
| |
| virtual DtPropertyInterface * | property () |
| |
| virtual const DtPropertyInterface * | property () const |
| |
| virtual DtString | toXml () const |
| |
| virtual DtRwVariableBindings * | generateVariableBindings () const |
| | Iterates over the registry (recursively) and returns a variable bindings object that contains all the variables that are contained in this read/writer class. More...
|
| |
| virtual bool | toXml (const DtFilename &) const |
| | Writes contents of xml result to the given filename. More...
|
| |
| virtual bool | fromXml (const DtString &) |
| | Restores object from given xml string. Returns true if valid. More...
|
| |
| virtual bool | fromXmlFile (const DtFilename &) |
| | Restores object from given xml file. More...
|
| |
| virtual void | putSelf (DtEnvironmentSP, DtEnvValueSP parent) const |
| |
| virtual void | putData (DtEnvironmentSP, DtEnvValueSP value) const |
| | Override to add attributes of actual data. More...
|
| |
| virtual void | putVariableReference (DtEnvironmentSP, DtEnvValueSP value) const |
| | Called when the item is a variable reference. More...
|
| |
| virtual void | getSelf (const DtEnvironmentSP, const DtEnvValueSP root, const SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &bindings=DtVariableBindingsList()) |
| |
| virtual void | getData (const DtEnvironmentSP, const DtEnvValueSP, const SearchPaths &searchPaths=SearchPaths(), const DtVariableBindingsList &bindings=DtVariableBindingsList()) |
| | Gets data from the environment value. More...
|
| |
| virtual void | unrecognizedItem (const DtEnvironmentSP env, const DtEnvValueSP root, const SearchPaths &searchPaths, const DtVariableBindingsList &varBindings) |
| | Called when the xml reader tries to parse an unknown reader/writer item. Default is a no-op. More...
|
| |
| virtual void | getVariableReference (DtEnvironmentSP, DtEnvValueSP value) |
| | Called when the item is a variable reference. More...
|
| |
|
| virtual bool | createPortGroups () |
| | Overridden to call createRotaryWingControlPortGroup() and createGuidancePortGroup() More...
|
| |
| virtual bool | createPorts () |
| | Overridden to create terrain proximity input port. More...
|
| |
| virtual void | processMoveAlong (const DtTaskMessage &msg, DtSimTaskStatePtr taskStatePtr) |
| |
| | DtRotaryWingMoveAlongControllerComponent () |
| | default constructor - should not be called More...
|
| |
| | DtRotaryWingMoveAlongControllerComponent (const DtRotaryWingMoveAlongControllerComponent &orig) |
| | copy constructor More...
|
| |
| DtRotaryWingMoveAlongControllerComponent & | operator= (const DtRotaryWingMoveAlongControllerComponent &orig) |
| | assignment operator More...
|
| |
| virtual void | pilotProperties () |
| | Sets the pilot properties. More...
|
| |
| virtual void | buildLocalRoute () |
| | builds the local copy of the route by copying myRoute's vertices to my local storage in process state repository: myVertices. More...
|
| |
| virtual void | emptyVertexList () |
| | removes and deletes vertices from the vertex list in process state repository (calls process state repository's emptyRouteVertices()). More...
|
| |
| virtual void | processEstimatedTotCalculation () |
| | calculate estimated tot More...
|
| |
| virtual void | clearTask () |
| | Overridden to deactivate the port group when this controller completes a task. More...
|
| |
| virtual void | lookupAndCacheProcessSR () |
| | This function looks up a process state repository in the process state repository manager by name, and caches a pointer to it in myProcessState. More...
|
| |
| virtual bool | postAddComponentsInit () |
| | Calls lookupAndCacheProcessSR(), to look up our process state repository after all of the components have been created and loaded. More...
|
| |
| virtual void | updateTaskVisualizations () |
| | update visualizations More...
|
| |
| virtual bool | createGuidancePortGroup () |
| | Create the various guidance ports to the pilot controller. More...
|
| |
| virtual bool | createDesiredPositionPort () |
| |
| virtual bool | createDesiredVelocityPort () |
| |
| virtual bool | createDesiredAccelerationPort () |
| |
| virtual bool | createDesiredHeadingPort () |
| |
| virtual bool | createPositionSelectorPort () |
| |
| virtual bool | createContinueMovementPort () |
| |
| virtual bool | createVelocitySelectorPort () |
| |
| virtual bool | createAccelerationSelectorPort () |
| |
| virtual bool | createHeadingSelectorPort () |
| |
| virtual bool | createAggressivenessPort () |
| |
| virtual bool | createPowerDownPort () |
| |
| virtual void | clearPendingSubtasks () |
| | Iterates over collection of all pending subtasks for this controller, and calls clearSubtask() for each subtask type. More...
|
| |
| virtual void | clearSubtasksByType (const DtSimTaskMessageType &taskType) |
| | Clear all subtasks of a given type. More...
|
| |
| virtual void | cleanupInactiveSubtaskStatus () |
| | Clears out subtask status entries that are either completed or canceled which were started by this controller. More...
|
| |
| virtual void | suspendSubtasksOfTask (int taskId, DtSuspendedTaskInfo *suspendInfo) |
| | Suspends all running subtasks of taskId, and puts the suspend info for each of them as subtasks into the provided suspendInfo. More...
|
| |
| virtual void | suspendSubtaskOfTask (int taskId, int subtaskId, DtSuspendedTaskInfo *suspendInfo) |
| | Suspends a single running subtasks of taskId, and puts the suspend info into the provided suspendInfo. More...
|
| |
| virtual DtSimTaskMessageType | remapScriptId (const DtSimTaskMessageType &) const |
| | In case this is aliased, return the actual script id. More...
|
| |
| | DtControllerComponent () |
| | default constructor More...
|
| |
| | DtControllerComponent (const DtControllerComponent &orig) |
| | copy constructor More...
|
| |
| const DtControllerComponent & | operator= (const DtControllerComponent &orig) |
| | assignment operator More...
|
| |
| virtual void | onRestore () |
| | Override to iterate over the descriptor to see if there are any targetting control tables. More...
|
| |
| virtual void | initializeTargetingControlTableFromDescriptor (const DtReaderWriter *) |
| |
| virtual double | computeCurrentTime () |
| | Compute current time and myDT. More...
|
| |
| bool | testInvariant () const |
| |
| DtVrfProcessStateRepository * | createComponentPsr (const DtString &defaultPsrType, const DtString &defaultPsrName, bool useDescriptorParams=true) |
| | Creates a PSR for this component and registers it with the PSR manager. More...
|
| |
| virtual void | destroyTaskVisualizations () |
| | Destroys all task visualizations for this component. More...
|
| |
| virtual void | destroyTaskVisualization (const DtString &name) |
| | Destroys an existing task visualization. More...
|
| |
| virtual DtPointTaskVisualizationPtr | pointTaskVisualization (const DtString &name) |
| | Finds an existing or creates a new point task visualization with the given name. More...
|
| |
| virtual DtLineTaskVisualizationPtr | lineTaskVisualization (const DtString &name) |
| | Finds an existing or creates a new line task visualization with the given name. More...
|
| |
| virtual DtAreaTaskVisualizationPtr | areaTaskVisualization (const DtString &name) |
| | Finds an existing or creates a new area task visualization with the given name. More...
|
| |
| virtual DtTextTaskVisualizationPtr | textTaskVisualization (const DtString &name) |
| | Finds an existing or creates a new text task visualization with the given name. More...
|
| |
| double | calculateNextTaskVisTickTime () const |
| | Determines the next time the task visualizations should be ticked. More...
|
| |
| virtual void | bindToRwAsVariable (const DtReaderWriter *rw) |
| | Copies values from the specified DtReaderWriter. More...
|
| |
| | DtObjectDebugger () |
| |
| | DtObjectDebugger (const DtObjectDebugger &) |
| |
| | ~DtObjectDebugger () |
| |
Public Member Functions inherited from DtRotaryWingTaskController