DtEnvironmentalVolumetricLineVisualizer display a line that contains at least two points. Use this class if you want to create a line that has a physical line width and a physical line height. This differs from the DtEnvironmentalLineVisualizer class in that it supports both items being set at the same time for a more consistant and correct visualization in 2D and 3D modes. This class does not support the drawing of arrows with volumetric lines. This class will also create a volumetric facade interface (rather than a line facade interface) which will create polygonal models rather than line models for the use in displaying these visuals.

Inheritance diagram for makVrv::DtEnvironmentalVolumetricLineVisualizer:

[legend]

Public Member Functions
	DtEnvironmentalVolumetricLineVisualizer (DtBaseConnection &simulation, DtStateListener &listener, int modelSet)

	DtEnvironmentalVolumetricLineVisualizer (DtBaseConnection &simulation, DtStateListener &listener, DtSceneObjectAgent *sceneObject, int modelSet)

virtual	~DtEnvironmentalVolumetricLineVisualizer ()

	DtEnvironmentalVolumetricLineVisualizer ()=delete

	DtEnvironmentalVolumetricLineVisualizer (const DtEnvironmentalVolumetricLineVisualizer &)=delete

DtEnvironmentalVolumetricLineVisualizer &	operator= (const DtEnvironmentalVolumetricLineVisualizer &)=delete

virtual void	initialize () override

virtual void	slot_setSelected (bool) override


virtual void	setColor (float r, float g, float b, float a)

virtual void	useDefaultColor ()

virtual void	setInsideColor (float r, float g, float b, float a)

virtual void	getInsideColor (float &r, float &g, float &b, float &a)

virtual void	setSelectedInsideColor (float r, float g, float b, float a)

virtual void	getSelectedInsideColor (float &r, float &g, float &b, float &a)

virtual void	setOutsideColor (float r, float g, float b, float a)

virtual void	getOutsideColor (float &r, float &g, float &b, float &a)

virtual void	setSelectedOutsideColor (float r, float g, float b, float a)

virtual void	getSelectedOutsideColor (float &r, float &g, float &b, float &a)

virtual void	updateColors ()=0


virtual void	setPixelLineWidth (int)

virtual int	pixelLineWidth ()


virtual void	setPhysicalLineWidth (float)

virtual float	physicalLineWidth ()


virtual void	setSolid (bool)

virtual bool	isSolid ()

Public Member Functions inherited from makVrv::DtSceneObjectVisualizer
	DtSceneObjectVisualizer (DtBaseConnection &simulation, DtStateListener &listener, int modelSet)

	DtSceneObjectVisualizer (DtBaseConnection &simulation, DtStateListener &listener, DtSceneObjectAgent *sceneObject, int modelSet)

virtual	~DtSceneObjectVisualizer ()

virtual DtUniqueID	sceneObjectID () const override

virtual DtSceneObjectAgent *	sceneObjectAgent ()

virtual void	setParent (DtStateVisualizer *p)

virtual void	setModelDefinitionForAgents ()

virtual void	setSceneObjectAgent (DtSceneObjectAgent *)

virtual void	setElementID (const DtElementID &elementID)

DtElementID	elementID () const

Public Member Functions inherited from makVrv::DtStateVisualizer
	DtStateVisualizer (DtBaseConnection &connection, DtStateListener &listener, int modelSet)

	DtStateVisualizer (DtBaseConnection &connection, DtStateListener &listener, DtSceneObjectAgent *sceneObjectAgent, int modelSet)

virtual	~DtStateVisualizer ()

virtual DtObserverMode::ModelSets	modelSet ()

virtual const TypeInfo &	typeInfo () const =0

virtual const DtStateVisualizer *	parent () const

void	setModelDefinition (const std::string &definition)

const std::string &	modelDefinition () const

virtual void	implementVisibility (bool visible)

void	setName (const std::string &)

const std::string &	name () const

virtual void	setPickable (bool)

virtual bool	pickable () const

virtual void	setSceneObjectID (DtUniqueID id)

int	visualizerType () const

virtual void	setVisualizerDefinition (const DtVisualizerDefinition &)

DtStateListener &	listener ()

const DtStateListener &	listener () const

DtBaseConnection &	simulation ()

void	setDistribute (bool b)

bool	distribute () const

virtual bool	setVisualizerIsVisible (bool vis, DtVisualizerShowHideContext::VisualizerShowHideContext context)

Protected Member Functions
virtual void	connectToListenerSignals () override

virtual void	setInitialValuesFromVisualizerDefinition () override

Protected Member Functions inherited from makVrv::DtSceneObjectVisualizer
virtual DtSceneObjectAgent *	createObjectAgent ()

virtual void	createModelAgents ()

virtual void	destroyModelAgents ()

Protected Member Functions inherited from makVrv::DtStateVisualizer
virtual void	makeVisible ()

virtual bool	isVisible () const

template<typename T , typename C >
void	connectAndUpdate (boost::signalslib::signal< void(T)> &sig, void(C::*fp)(T), T val)

Protected Attributes
DtTacticalGraphicStateListener &	myLineListener

int	myPixelLineWidth

float	myPhysicalLineWidth

float	myDefaultColor [4]

float	myColor [4]

float	myInsideColor [4]

float	myOutsideColor [4]

float	mySelectedOutsideColor [4]

float	mySelectedInsideColor [4]

bool	mySelectedInsideColorSet

bool	mySelectedOutsideColorSet

bool	myDefaultColorSet

bool	myIsSolid

Protected Attributes inherited from makVrv::DtSceneObjectVisualizer
DtElementID	myElementID

bool	myOwnsSceneObjectAgent

Protected Attributes inherited from makVrv::DtStateVisualizer
DtBaseConnection &	mySimulation

DtStateListener &	myListener

bool	myDistributeFlag

DtUniqueID	mySceneObjectID

std::string	myName

std::string	myModelDefinition

DtSignalConnectionManager	myConnections

int	myModelSet

int	myVisualizerType

bool	myPickable

bool	myVisible

const DtVisualizerDefinition *	myVisualizerDefinition

DtStateVisualizer *	myParent

DtSceneObjectAgent *	mySceneObjectAgent

bool	myInitialInitializeDone

ShowHideContextVector	myVisualizerShowHideContexts

Additional Inherited Members
Public Types inherited from makVrv::DtStateVisualizer
enum	Type { AllVisualizerTypes = 0, EntityVisualizerType = 1, EnvironmentalVisualizerType, InteractionVisualizerType, AggregateVisualizerType, IntervisibilityVisualizerType, TacticalSmokeVisualizerType, UserType = 10000 }

Public Attributes inherited from makVrv::DtStateVisualizer
boost::signalslib::signal < void(DtStateVisualizer , DtStateVisualizer , DtStateVisualizer *)>	signal_reparented

Protected Types inherited from makVrv::DtStateVisualizer
typedef std::vector < DtVisualizerShowHideContext::VisualizerShowHideContext >	ShowHideContextVector

Constructor & Destructor Documentation

makVrv::DtEnvironmentalVolumetricLineVisualizer::DtEnvironmentalVolumetricLineVisualizer	(	DtBaseConnection &	simulation,
		DtStateListener &	listener,
		int	modelSet
	)

Constructor.

makVrv::DtEnvironmentalVolumetricLineVisualizer::DtEnvironmentalVolumetricLineVisualizer	(	DtBaseConnection &	simulation,
		DtStateListener &	listener,
		DtSceneObjectAgent *	sceneObject,
		int	modelSet
	)

Constructor.

virtual makVrv::DtEnvironmentalVolumetricLineVisualizer::~DtEnvironmentalVolumetricLineVisualizer ( )

virtual

Destructor.

makVrv::DtEnvironmentalVolumetricLineVisualizer::DtEnvironmentalVolumetricLineVisualizer ( )

delete

not allowed - default constructor

makVrv::DtEnvironmentalVolumetricLineVisualizer::DtEnvironmentalVolumetricLineVisualizer ( const DtEnvironmentalVolumetricLineVisualizer & )

delete

not allowed - copy constructor

Member Function Documentation

DtEnvironmentalVolumetricLineVisualizer& makVrv::DtEnvironmentalVolumetricLineVisualizer::operator= ( const DtEnvironmentalVolumetricLineVisualizer & )

delete

not allowed = equals operator

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::initialize ( )

overridevirtual

Initialize the visualizer.

Reimplemented from makVrv::DtStateVisualizer.

Reimplemented in makVrv::Dt3DEnvironmentalVolumetricLineVisualizer.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::setColor	(	float	r,
		float	g,
		float	b,
		float	a
	)

virtual

Color setting routines.

Sets the color for the line. This will apply to all segments of the line. If the default (all 0's), uses the default as defined in the visual definition

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::useDefaultColor ( )

virtual

Sets color to default color as defined in the visualizer definition. Called when color set is 0, 0, 0, 0.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::setInsideColor	(	float	r,
		float	g,
		float	b,
		float	a
	)

virtual

Sets the inside color of the line.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::getInsideColor	(	float &	r,
		float &	g,
		float &	b,
		float &	a
	)

virtual

Color setting routines.

Sets the color for the line. This will apply to all segments of the line. If the default (all 0's), uses the default as defined in the visual definition

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::setSelectedInsideColor	(	float	r,
		float	g,
		float	b,
		float	a
	)

virtual

Sets the selected inside color.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::getSelectedInsideColor	(	float &	r,
		float &	g,
		float &	b,
		float &	a
	)

virtual

Color setting routines.

Sets the color for the line. This will apply to all segments of the line. If the default (all 0's), uses the default as defined in the visual definition

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::setOutsideColor	(	float	r,
		float	g,
		float	b,
		float	a
	)

virtual

Sets the outside color of the line.

Reimplemented in makVrv::Dt3DEnvironmentalVolumetricLineVisualizer.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::getOutsideColor	(	float &	r,
		float &	g,
		float &	b,
		float &	a
	)

virtual

Color setting routines.

Sets the color for the line. This will apply to all segments of the line. If the default (all 0's), uses the default as defined in the visual definition

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::setSelectedOutsideColor	(	float	r,
		float	g,
		float	b,
		float	a
	)

virtual

Sets the selected outside color. This color is used if the object is selected.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::getSelectedOutsideColor	(	float &	r,
		float &	g,
		float &	b,
		float &	a
	)

virtual

Color setting routines.

Sets the color for the line. This will apply to all segments of the line. If the default (all 0's), uses the default as defined in the visual definition

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::updateColors ( )

pure virtual

Update the colors on the model.

Implemented in makVrv::Dt3DEnvironmentalVolumetricLineVisualizer, and makVrv::Dt2DEnvironmentalVolumetricLineVisualizer.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::slot_setSelected ( bool )

overridevirtual

Sets whether or not the line is selected. Connected to DtStateListener's signal_objectSelectionChanged signal.

Reimplemented from makVrv::DtStateVisualizer.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::setPixelLineWidth ( int )

virtual

Set / get the width of the outside line. Default is 2. The pixel line width is the line in osg pixel space. This is different than physicalLineWidth which sets the width of the line in database space. If value is 0 will use default pixel line width.

Reimplemented in makVrv::Dt2DEnvironmentalVolumetricLineVisualizer.

virtual int makVrv::DtEnvironmentalVolumetricLineVisualizer::pixelLineWidth ( )

virtual

Set / get the width of the outside line. Default is 2. The pixel line width is the line in osg pixel space. This is different than physicalLineWidth which sets the width of the line in database space. If value is 0 will use default pixel line width.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::setPhysicalLineWidth ( float )

virtual

Set / get the width of the line in database space.

Reimplemented in makVrv::Dt2DEnvironmentalVolumetricLineVisualizer, and makVrv::Dt3DEnvironmentalVolumetricLineVisualizer.

virtual float makVrv::DtEnvironmentalVolumetricLineVisualizer::physicalLineWidth ( )

virtual

Set / get the width of the line in database space.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::setSolid ( bool )

virtual

Set / Get if the model is solid. Default is true.

Reimplemented in makVrv::Dt3DEnvironmentalVolumetricLineVisualizer, and makVrv::Dt2DEnvironmentalVolumetricLineVisualizer.

virtual bool makVrv::DtEnvironmentalVolumetricLineVisualizer::isSolid ( )

virtual

Set / Get if the model is solid. Default is true.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::connectToListenerSignals ( )

overrideprotectedvirtual

Connect the visualizer to the listeners signals Called by DtStateVisualizer::initialize()

Reimplemented from makVrv::DtStateVisualizer.

Reimplemented in makVrv::Dt3DEnvironmentalVolumetricLineVisualizer.

virtual void makVrv::DtEnvironmentalVolumetricLineVisualizer::setInitialValuesFromVisualizerDefinition ( )

overrideprotectedvirtual

Sets member variables from the visualizer definition if they exist Should not call this directly. Called by DtStateVisualizer::initialize.

Reimplemented from makVrv::DtStateVisualizer.

Reimplemented in makVrv::Dt3DEnvironmentalVolumetricLineVisualizer.

Member Data Documentation

DtTacticalGraphicStateListener& makVrv::DtEnvironmentalVolumetricLineVisualizer::myLineListener

protected

int makVrv::DtEnvironmentalVolumetricLineVisualizer::myPixelLineWidth

protected

float makVrv::DtEnvironmentalVolumetricLineVisualizer::myPhysicalLineWidth

protected

float makVrv::DtEnvironmentalVolumetricLineVisualizer::myDefaultColor[4]

protected

float makVrv::DtEnvironmentalVolumetricLineVisualizer::myColor[4]

protected

float makVrv::DtEnvironmentalVolumetricLineVisualizer::myInsideColor[4]

protected

float makVrv::DtEnvironmentalVolumetricLineVisualizer::myOutsideColor[4]

protected

float makVrv::DtEnvironmentalVolumetricLineVisualizer::mySelectedOutsideColor[4]

protected

float makVrv::DtEnvironmentalVolumetricLineVisualizer::mySelectedInsideColor[4]

protected

bool makVrv::DtEnvironmentalVolumetricLineVisualizer::mySelectedInsideColorSet

protected

bool makVrv::DtEnvironmentalVolumetricLineVisualizer::mySelectedOutsideColorSet

protected

bool makVrv::DtEnvironmentalVolumetricLineVisualizer::myDefaultColorSet

protected

bool makVrv::DtEnvironmentalVolumetricLineVisualizer::myIsSolid

protected

The documentation for this class was generated from the following file:

/data/exports/nrhent7-1/nightly/docs/vrForces.vrf5-0-branch/include/vrvCore/DtEnvironmentalVolumetricLineVisualizer.h

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation